Modular Synth Panels

Dave,

It looks good. The jacks are a little farther apart horizontally, and 
closer vertically, than MOTM, but it should work just fine. I only 
state the differences in case those are important to you. But for 
what you have on the panel, it's a good layout. Smart to keep the 
keyboard cv's to the side. 

The Euro is about equal to the dollar last time I checked. When I pay 
for it, you can send me money via Paypal or check or whatever. 
Schaeffer's not the best at communicating lately. I asked a couple 
questions twice now, w/ no response. This isn't atypical for them. 
Orders take anywhere from two weeks to two months in my experience. I 
think they're a small company, w/ all the attached pros and cons 
there.

Scott

--- In motmpanels@y..., "djbrow54" <davebr@e...> wrote:
> I'm currently waiting for my MOTM modules to arrive.  I need to 
build an interface for my Arp 3604 CV keyboard and designed and 
uploaded a 2 wide MOTM style panel.  It's in the DIY Designs, 
Schematics folder called diy_cvkbd.fpd.  I'd appreciate having 
someone check it and tell me if it's OK.  Since I don't have a MOTM 
panel yet I guessed at some of the line spacings.  It's pretty 
simple, just some 1/8" and 1/4" jacks for CV, Gate, and Trigger and a 
power connector.  Am also open to any suggestions.
> 
> I'm also curious as to how one pays for this, how long it takes, 
etc.  Also, what's the conversion rate for euros?
> 
> Thanks. - Dave