Re: JH Tau Pipe Phaser...
2007-11-17 by wjhall11
James - yes - that d be a mouser part # 581-BQ074D0474J right? Just let us know your mail address. You can send us one back when you get your order in - OK?
Messages
Browse messages
Page 48 of 66 · 3299 messages matched
[ModularSynthPanels] JH Tau Pipe Phaser...
2007-11-17 by James Elliott
Does anyone happen to have an extra 470n 5% box cap that they can spare me? I d like to finish my tau pipe phaser module. I have several of these caps on order
Stooge Oakley OMS 301 panels
2007-11-16 by gino wong
I am offering up three drilled Stooge Oakley OMS 301 VCO panels. They pot cut outs don t line up with my rev 1 pcbs. The panels have coarse, width and sync
Re: SN Voice
2007-11-16 by Scott Deyo
Hey Todd, I like that layout -- nicely done. The only thing I d add is the Noise Keyboard jack, since we have room anyway. I ll do the SN-Voice in the
Re: [ModularSynthPanels] Re: SN Voice
2007-11-15 by krisp
I ve just put a jpg of my sn-voice 3u panel in the files section cheers Paul ... From: Todd Fletcher To: ModularSynthPanels@yahoogroups.com Sent: Thursday,
Re: SN Voice
2007-11-15 by Todd Fletcher
I d like one also. Does anybody have any suggested layouts? TF
Re: SN Voice
2007-11-15 by loopcycle
yes, count me in! im just about done soldering my SN voice and i would very much prefer a bridechamber panel with all SN-documented options. im not
Re: Adding scale marks to panels
2007-11-14 by djbrow54
I created a 1U and 2U template with HPGL graphics. I had to do the inner and outer tic marks separately to have different line widths. I tried this application
Re: Solder Recommendations....
2007-11-13 by adaaxs
I use Multicore Hydro-X, .032in .81mm. This works great. It is thin and I can can control the amount of solder I use better. I am concerned about the lead
Re: [ModularSynthPanels] Vactrol Question....
2007-11-11 by James Elliott
ahhh. I see what I did (result of watching Stand Up Fridays on Comedy Central while soldering). I bent the other leads around the top of the vactrol rather
Adding scale marks to panels
2007-11-11 by Duh!
There was an enquiry somewhere in here about how to add scale-marks round a pot. Someone helpfully supplied a panel with the HPGL files on it. I just
Re: [ModularSynthPanels] Vactrol Question....
2007-11-11 by Scott Juskiw
There shouldn t be any problems if they are in contact. Neither component should generate heat in this circuit. I m surprised when you say the vactrols are
[ModularSynthPanels] Vactrol Question....
2007-11-11 by James Elliott
I think I made my first soldering mistake due to insufficient board stuffing planning (on my part)... As I was putting my Neural Agonizer together I installed
tubes
2007-11-10 by Scott Deyo
hey everyone, i have the 1J24B tubes for Ken s tube VCA in stock, in case anyone needs one or 20. i m out of Tau s, but more on the way. cheers, Scott Deyo The
Re: [ModularSynthPanels] Solder Recommendations....
2007-11-09 by James Elliott
Awesome, thanks for the recommendations guys! ... From: loopcycle To: ModularSynthPanels@yahoogroups.com Sent: Friday, November 9, 2007
Re: [ModularSynthPanels] Solder Recommendations....
2007-11-09 by loopcycle
i use the same stuff that Paul S used in MOTM kits: Kester 331 Organic Kester 245 No-clean ... screw the RIAA. artists, take control. share and remix music,
Re: [ModularSynthPanels] Solder Recommendations....
2007-11-09 by John Luciani
... I do mostly SMD and have been using Kester 24-6337-6422 15mil diameter solder, SN63PB37, water soluble flux and Kester 2331-ZX Water Soluble Flux Pen.
[ModularSynthPanels] Solder Recommendations....
2007-11-09 by James Elliott
Can someone please recommend a good organic solder to use for module building (both washable & non-wash)? Something preferably at Mouser or Allied (or some
Re: [sdiy] NJM-2069 internals. Was: Re: SSM2040
2007-11-07 by gino wong
I have a tube of chips marked CA3086 but the are marked 221-765 A and M9730AD I think these are house numbers but there is sort of a Signetics looking
Re: [ModularSynthPanels] proposed designs
2007-11-07 by Scott Deyo
Pulse Divider and Boolean Logic (not VC Divider; I ll come out w/ that later, another sweet module) ASR Gate Converter (which has the two comparators) NOR/
Re: [ModularSynthPanels] proposed designs
2007-11-07 by Scott Deyo
I m working on the panel. I was trying to figure out how to fit everything on, and still have the rotary switch PCB-mounted, but I don t think it s possible --
Re: [ModularSynthPanels] proposed designs
2007-11-07 by James Elliott
Scott, quick question. What CGS PCBs are needed for the analog computer? I think I see the Analog Shift Register and the VC Divider - however I m confused as
Re: [ModularSynthPanels] proposed designs
2007-11-07 by James Elliott
I just now have had the opportunity to go over your synth panel proposals. Some are a little funky, but who cares? I like them - I know I ll be buying several
[ModularSynthPanels] Panels
2007-11-06 by James Elliott
Well, I just got my MUUB4 (320R) & Doomsday boards!! Can t wait to mount them behind a bridechamber panel ;-) I ll be starting on my neural agonizer and tau
Re: [ModularSynthPanels] 137k
2007-11-05 by Scott K Warren
I d like to get enough for two Mankatos if that s ok. I ll send you a stamp if you give me a mailing address. Thanks a million! skw
Re: tda1022
2007-11-02 by wjhall11
Hi Gino - We got ours last Friday. And if you could put aside one of those 137ks for us, we d sure appreciate it. Thanks. Bill and Will
137k
2007-11-02 by gino wong
Anybody need 137k 1% metal film for their Mankato ? I am well stocked on onesy resistors so a stamp is all I need . best g
tda1022
2007-11-02 by gino wong
Has anyone gotten their tda1022 order from Smallbear? Mine hasn t shown up yet and they haven t answeed my email query.
Re: [ModularSynthPanels] OT: coaxial cable
2007-10-31 by Richard Brewster
The 75 ohm impedance refers to its characteristics at radio frequencies. It is normally used for video and TV antenna applications. You could use it for
Re: proposed designs
2007-10-31 by adaaxs
You are so right. moving away from filters et al is a brilliant way of finding new sorts of sounds. I have a foot in both worlds coming from the time when e
OT: coaxial cable
2007-10-31 by dhamaryder
Hello out there, I realize this isn t the forum for this but it s the only one I m a member of that someone might know something about this. I wanted to get
Re: [ModularSynthPanels] proposed designs
2007-10-30 by Scott Deyo
The Forbidden Planet stuff is fantastic -- organic and barely in control. I ll have to find that story you read. That s the main draw of CGS stuff for me -- I
Switchcraft copies for $.75 each!!!
2007-10-29 by Scott Deyo
Hello all, I m ordering a buttload of 1/4 jacks which are identical to Switchcraft 112a (mono switched). If anyone wants any, I m ordering 1000 now and can
Re: [ModularSynthPanels] proposed designs
2007-10-29 by mcb, inc.
... That could be good. I just bought a bunch of Soviet decatrons and I d like some eye tubes too. ... That s more what I m thinking about. I read through
Re: [ModularSynthPanels] proposed designs
2007-10-29 by Scott Deyo
... Do mean transistors instead of CMOS? Or tube logic? : ) I remember doing searches for analog computers on eBay, and there were some interesting old kits
Re: [ModularSynthPanels] Re: proposed designs
2007-10-29 by Scott Deyo
I see I need to delve further into www.dragonflyalley.com ! ... I ll check em out. It s great to have feedback! Scott Deyo The Bridechamber
Re: proposed designs
2007-10-28 by clickmrmike
Scott- I put my designs for a few of these on the ills site, particularly the Subosc and the CV cluster, and switch matrix. I tried to do designs that would
Re: [ModularSynthPanels] proposed designs
2007-10-28 by mcb, inc.
... More hybrid than analog, perhaps? Maybe we could use an actual analog computer module... ... What s this new quality called stairness ? I will say, Ken s
proposed designs
2007-10-28 by Scott Deyo
Hello Group! I made a new folder of silkscreen designs for your perusal and comments. They are in Illustrator, so your Acrobat Reader should open them. If not,
Re: [ModularSynthPanels] Re: new panels are in
2007-10-27 by contact@bridechamber.com
Well, it s obvious you need another cabinet ; ) Cheers, Scott ... From: Richard Brewster To: ModularSynthPanels@yahoogroups.com Sent: Friday, October 26, 2007
Re: [ModularSynthPanels] Re: new panels are in
2007-10-26 by Richard Brewster
I regretted passing by the Binary Zone a few years ago, during the original Stooge panel release. I will consider it again now, even though it s getting to
Re: new panels are in
2007-10-26 by adaaxs
Suboscillator would be a good idea. There are so many variations that it would help if someone decided what version I should build.
Re: [ModularSynthPanels] new panels are in
2007-10-26 by Scott Deyo
Well, an output for each division would require many buffers. For that, I d suggest the Master Divider (which I also have designed but not fabricated). The
Re: [ModularSynthPanels] new panels are in
2007-10-26 by loopcycle
ill throw my hat in for a miniwave front panel. ... === message truncated === screw the RIAA. artists, take control. share and remix music, legally, on your
Re: [ModularSynthPanels] new panels are in
2007-10-26 by loopcycle
ive had the binary zone for just a few months, was initially turned off by it, and im warming up to it again; it has a lot of useful features. im not yet sure
Re: [ModularSynthPanels] new panels are in
2007-10-26 by James Elliott
If the CGS SubOsc is ready to go, then I m game! ...especially if it has individual outputs for each divided frequency. Sounds like the pulse divider &
Re: [ModularSynthPanels] new panels are in
2007-10-26 by Scott Deyo
Hmm... Binary Zone. Looks cool, but reminds me that I have the CGS SubOsc laid out and ready to go -- one of my all-time fave modules. I think my module uses a
Re: [ModularSynthPanels] new panels are in
2007-10-26 by krisp
MOTM Tellun Daughter Panels I would be in for 2 MOTM 120 panels and need at least 2 Blacet VC Miniwave cheers paul ... From: David Moylan To:
Re: new panels are in
2007-10-26 by clickmrmike
Yep; I second the binary zone, too. Actually, given my backlog, there aren t too many panels I couldne t use :) ... the VC Miniwave) is the Binary Zone!!!!!
Re: [ModularSynthPanels] new panels are in
2007-10-26 by David Moylan
Another vote for the MiniWave here. Dave