Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by Ritchie DeCarlo
Please post your 3u design when you finish. Thanx! ________________________________ From: sduck409 To:
Messages
Browse messages
Page 11 of 66 · 3299 messages matched
Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by sduck409
Is it really a full synth voice? I didn t think it had a pitch cv in, and certainly not one that s very accurate. I could be wrong on this. I ve got 2 of these
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by Ritchie DeCarlo
Good Point! Looks like 1 or 2 of these modules will be a good start. Then additional MPS panels will probably be defined: BD, HH, etc........
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by eric f
For sure... I wasn t trying to flip in my response ( a(nother) drum machine ) I merely wanted to point out that hard wired parameters is an option. An option
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by Pete
Keep in mind that in reality is a full synth voice. You can play it like a regular synth if you want to. I have built some of Thomas s drum modules, and they
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by Ritchie DeCarlo
Good idea, but if a smaller format makes the most sense, I might go for building a Stand-alone 19 rack unit. ________________________________ From: Scott
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by Ritchie DeCarlo
Don t get me wrong.........I m very excited about this MPS. Just trying to figure out what makes the most sense. When this Module was first mentioned, I had
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by Scott Juskiw
If you use small knobs, you can get by with 3U, maybe even 2U. That s what I m planning on doing, but not anytime soon, too many other modules in the queue
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-11 by eric f
My feeling on this is that you could hard wire certain options to eliminate knobs. I originally bought 6 PCBs intending to do just that. But since then I ve
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-10 by Samppa Tolvanen
... A Drummer talks about the Real Estate and the Drums, a really funny one :D Samppa
Re: [ModularSynthPanels] Re: ?? Thomas Henry Mega Percussive Synth
2010-05-10 by Ritchie DeCarlo
It still looks like A LOT of Real Estate for 1 drum. This sounds like the type of thing people will want to use live also. There must be a way to have a panel
Re: ?? Thomas Henry Mega Percussive Synth
2010-05-10 by klstay
... Other than enough cab space? ;-) I have 3 boards and have been waiting for this panel. The size seems acceptable to me. I am hoping to pair them with a
Re: [ModularSynthPanels] ?? Thomas Henry Mega Percussive Synth
2010-05-10 by Pete
You are correct, this creates only one drum sound at a time, but the range of sounds you can make are probably infinite. pete ... -- www.p23.biz
?? Thomas Henry Mega Percussive Synth
2010-05-10 by Ritchie
I m probably one of the only drummers here, so maybe the use for this module is different for you........Looking at the PDF here, it appears to be a bit much
Re: Blacet Miniwage
2010-05-10 by sduck409
I ve just uploaded a bunch of fpd files, and pictures of what I built with them - all in the sduck folders (both files and pictures section) The miniwave file
New file uploaded to ModularSynthPanels
2010-05-10 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2010-05-10 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2010-05-10 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
New file uploaded to ModularSynthPanels
2010-05-10 by ModularSynthPanels@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the ModularSynthPanels group. File :
Blacet Miniwage
2010-05-08 by gino wong
The Blacet / Wiard Miniwave is available sans panel, another version is sans Jacks and Panel. That will save us a few dollars for us classic form factor
Re: Frac Panel .FPD
2010-05-03 by data2action
check the files section.
Frac Panel .FPD
2010-05-02 by Ritchie
Looking for 3 and 1.5 Panel Templates. Please send to Ritchiedrums@yahoo.com if you have any. Thanx!
Re: Bamboo front panels from ponoko.com
2010-04-25 by klstay
I would sure be interested in the MPS!
Re: [ModularSynthPanels] Bamboo front panels from ponoko.com
2010-04-24 by Jason Nanna
Yeah, I also have to say, the pictures may not show it too well, but the text is very crisp and very legible. The very dark brown serves as a perfect contrast
RE: [ModularSynthPanels] Bamboo front panels from ponoko.com
2010-04-24 by Greg James
Let me chime in here too - those are the best looking panels I ve seen in a long time. I ll bet painted bamboo would be a nice alternative for other
Re: [ModularSynthPanels] Bamboo front panels from ponoko.com
2010-04-24 by Kyle Stephens
Whoop! Incomplete email there! Continuing, they are just gorgeous. I ve thought about wood as a quick and cheap way of setting up panels, but the time and
Re: [ModularSynthPanels] Bamboo front panels from ponoko.com
2010-04-24 by Kyle Stephens
The Professor from Gilligan s Island would be proud :) Seriously though, ... From: Dave Garfield Subject: Re: [ModularSynthPanels] Bamboo
Re: [ModularSynthPanels] Bamboo front panels from ponoko.com
2010-04-24 by Dave Garfield
These are GORGEOUS! The bamboo gives them a really organic feel, and there s no question as to its durability. Plus, it s a recyclable material which, with
Re: [ModularSynthPanels] Bamboo front panels from ponoko.com
2010-04-24 by Ritchie DeCarlo
WOW!! Love it!!! ________________________________ From: jasonnanna To: ModularSynthPanels@yahoogroups.com Sent: Sat, April 24, 2010
Bamboo front panels from ponoko.com
2010-04-24 by jasonnanna
Hi all... New to the list. Just wanted to share with you an experiment I ve been pursuing for a few months now -- laser cut and engraved front panels for my
Re: [ModularSynthPanels] Re: fpd 4.0 mac / open source finally
2010-04-21 by Samppa Tolvanen
... No. It s other the way around: an export filter to make DXF from FPD (most likely Windows only and it s quite cheap). I would not hesitate to ask for a
Re: [ModularSynthPanels] Re: fpd 4.0 mac / open source finally
2010-04-21 by Richard Kendrick
DXF is Drawing Exchange Format. It is used by AutoCad and many other cad programs as a neutral drawing format so different cad programs can exchange drawings
Re: fpd 4.0 mac / open source finally
2010-04-21 by Todd
I found this in the FAQ: Which export filters are available? We offer a filter to export Front Panel Designer files into files with DXF extensions. The DXF
Re: [ModularSynthPanels] Re: fpd 4.0 mac / open source finally
2010-04-21 by Scott Deyo
Now I can t find it on their site; maybe they don t do that anymore. Scott Deyo contact@bridechamber.com The Bridechamber www.bridechamber.com Jealous Edison
Re: fpd 4.0 mac / open source finally
2010-04-21 by adaaxs
That is useful information I wonder what the fee is ?
Re: [ModularSynthPanels] fpd 4.0 mac / open source finally
2010-04-19 by Scott Deyo
I m just very pleased that I no longer have a reason to keep a PC around! To use FPD for third-party manufacturing, you re supposed to pay a licensing fee, I
Re: [ModularSynthPanels] fpd 4.0 mac / open source finally
2010-04-18 by Samppa Tolvanen
... Hmm.. I never thought it that way. I was thinking how much losses it would make? People making a font driver better than for the included Autocad fonts and
Re: [ModularSynthPanels] fpd 4.0 mac / open source finally
2010-04-18 by Joe Miklojcik
Many times people mistake Open Source to mean runs on Linux *AND* MacOS. Nothing could be further from the truth. I often go to people who make this
Re: [ModularSynthPanels] fpd 4.0 mac / open source finally
2010-04-18 by Samppa Tolvanen
... Open Source = a binary distribution for certain platforms? Thanks a lot, man! Some really good Open Source EDA/CAD/CAM packages out there to compete with
Re: [ModularSynthPanels] Re: fpd 4.0 mac / open source finally
2010-04-12 by Scott Deyo
Julian is the beast. ... Scott Deyo contact@bridechamber.com The Bridechamber www.bridechamber.com Jealous Edison Record Kompany www.jealousedison.com
Re: [ModularSynthPanels] 2U or 3U high power supply front panel
2010-04-12 by Joe Miklojcik
Thanks for your reply. I ve seen what Larry Hendry did, and I ve seen what Richard Brewster did. Larry s design is for an in-front panel, such as you would
Re: [ModularSynthPanels] 2U or 3U high power supply front panel
2010-04-12 by Jason Proctor
Larry Hendry used to make what was called a 2U PSU Mult, which was kinda like what you describe. it was a full width 2U panel with holes for the IEC socket and
2U or 3U high power supply front panel
2010-04-12 by jfm3jfm3jfm3
So I m looking for a 2U or 3U high 19 panel that basically replaces the front panel of the MOTM-950, and which can also securely hold an MOTM-960. This will
Re: fpd 4.0 mac / open source finally
2010-04-12 by adaaxs
beast ?
Re: [ModularSynthPanels] fpd 4.0 mac / open source finally
2010-04-12 by Scott Deyo
Yupperz, the Beast is the one-off king!!!!!!! Scott Deyo contact@bridechamber.com The Bridechamber www.bridechamber.com Jealous Edison Record Kompany
Re: [ModularSynthPanels] Re: fpd 4.0 mac / open source finally
2010-04-11 by Steven Grimley-Taylor
... That s precisely how Julian created the last couple of panels for me...
Re: fpd 4.0 mac / open source finally
2010-04-11 by adaaxs
Absolutely. They can never be cheap enough. My father used to sell items that he had made his money back on many times for next to nothing. He made pennies on
fpd 4.0 mac / open source finally
2010-04-10 by Julian
... Or, indeed, even if you want 1-offs, there are still more affordable ways [than FPE] - http://www.thebeast.co.uk/cnc/ Julian (not really wanting to spam,
Re: [ModularSynthPanels] fpd 4.0 mac / open source finally
2010-04-10 by Steven Grimley-Taylor
Brilliant! Steve
fpd 4.0 mac / open source finally
2010-04-10 by gino wong
Reports are that it is very good. I still think it is only good for one offs and you need people like Scott and the others to make core modules affordable.