Silver printing PCBs on an inkjet printer
Started 2013-11-17 by Steve Greenfield
Threads
Recent topics
Green foil question
Started 2013-11-18 by <w6nim@...>
Rescuing a weak cupric chloride etch bath
Started 2013-11-09 by Philip Pemberton
symbol/footprint formats ::.was cheap pcbs
Started 2013-11-15 by <indigo_red@...>
rescuing weak CuCL/ Making CuCL quickly
Started 2013-11-11 by <benscale160@...>
Filling dye ink cartridges with pigment ink
Started 2013-11-12 by <beefyzee@...>
Printer scale accuracy and blackness.
Started 2013-11-02 by Terry Mickelson
[Homebrew PCBs] Inkjet-based circuits
Started 2013-11-11 by Mark Lerman
Double or triple printing to increase ink density/opaqueness.
Started 2013-11-06 by <beefyzee@...>
tracing paper, laser and photoresist
Started 2013-11-08 by Kerry Koppert
Pinhole question
Started 2013-11-07 by <w6nim@...>
Lets compare results, post some photos
Started 2013-11-08 by ctech
Positive or Negative Artwork Decals
Started 2013-11-07 by Brian Symons
Water transfer paper
Started 2013-11-06 by Corey Minion
Guide for inkjet print settings for opaque positives
Started 2013-11-01 by <beefyzee@...>
Mitch Davis: Hackvana.com
Started 2013-11-04 by Boman33
Using vinyl for toner transfer?
Started 2013-10-19 by <twgray2007@...>
Which laminator is best ?
Started 2013-10-30 by Forbes, Doug
Which PCB software is right?please advise me
Started 2013-10-27 by Mukundan Parthasarathy
Which Laminator seems best ?
Started 2013-10-30 by <doug.forbes@...>
t-shirts heat-press
Started 2013-10-29 by Raymond
Isolation mill software.
Started 2013-05-23 by Slavko Kocjancic
Experiments with ultrasonics and vibration etching
Started 2013-10-19 by <fred27murphy@...>
,Photoresist Anti-etching Blue Paint
Started 2013-10-26 by Kerry Koppert
Re: [Homebrew_PCBs] Digest Number 4154
Started 2013-10-27 by len.turnbow
Anyone using HP LaserJet P1006 printer for toner transfer?
Started 2013-10-19 by <twgray2007@...>
Using a vinyl cutter to make PCBs
Started 2013-10-21 by AlienRelics
Best Laser Printer for lamination NOW
Started 2013-10-20 by <krisfr@...>
I don't recommend this laser printer
Started 2013-10-17 by <beefyzee@...>
RE: [Homebrew_PCBs] RE: Inkjet photo paper in laser printer - will itmelt?
Started 2013-10-15 by Fadi Kahhaleh
Inkjet photo paper in laser printer - will it melt?
Started 2013-10-09 by <myclaw86@...>
Half a homebrew pcb ...
Started 2013-10-07 by arvidj01
PCB tinning
Started 2013-10-12 by Cristian
Printer Setup
Started 2013-10-08 by Jack Schmidling
Laminator
Started 2004-08-01 by millerdl
UVA Dosimeter – interest check and ideas
Started 2013-10-03 by william casselberry
Expo Drill Stand 14211
Started 2013-09-03 by <v321uk@...>
Tinning With Solder Paste and Flux Gel
Started 2013-09-29 by James
Some etched Artwork finished and questions on electrolytic etching
Started 2013-09-22 by rolynd33
Archiving Yahoo Groups messages; Neo prevents this
Started 2013-09-25 by Robin Whittle
Diaphragm and peristaltic pumps
Started 2013-09-20 by Robin Whittle
Tin Plating
Started 2002-03-03 by caveteursus
DIY Soldermask
Started 2013-09-21 by <bebx2000@...>
Touch off plate Z height compensation
Started 2013-09-21 by <kf7ycz@...>
Measured light reception from 10W LED according to distance from centre
Started 2013-09-19 by Robin Whittle
Imaging PCB with LED
Started 2013-09-13 by <eslavko@...>
Question about dry film negative photoresist...
Started 2013-09-04 by <twgray2007@...>
CuCl etchant - an update
Started 2013-08-16 by Philip Pemberton
Etch Back
Started 2013-09-08 by M A
USB soldering iron!
Started 2013-09-03 by Leon Heller