KiCad and guide dots for home drilling
Started 2013-05-27 by Robin Whittle
Threads
Recent topics
Perfect paper
Started 2011-12-07 by bigbazinga
HP Laser Jet 1320 Printer adequate ?
Started 2013-05-26 by Randall
Direct PCB Printer
Started 2013-05-23 by dheeraj_thegreat
HP vs Samsung toners
Started 2013-05-24 by Balbir
printer
Started 2013-05-18 by mcmurraygrouch57
Tidying up circuit boards after cutting
Started 2013-05-22 by Will Price
The Othermill: Custom Circuits at Your Fingertips
Started 2013-05-20 by Leon Heller
photo layer coming off
Started 2013-05-12 by dave_donlan
etching solutions
Started 2013-05-06 by N2CUA
Royal Sovereign Laminator mod question
Started 2013-04-30 by w9ran
Seno 100 photo resist applicator
Started 2013-04-02 by Alex Hun
PCB Making Equipment
Started 2013-04-29 by tgr8883
Need advice for large PCB and sub-mini SMDs
Started 2013-04-15 by william casselberry
Via Rivets To Fit 0.8mm Hole
Started 2013-03-20 by James
any chance stick dry film to pcb w/o laminator ?
Started 2013-03-25 by Hari Hendaryanto
Soldermask UV ink/paint/epoxy
Started 2013-03-30 by James
removing solder resist from pcb boards
Started 2013-04-02 by alexhun19
Vetco photo resist
Started 2013-04-08 by Rick Sparber
Bulk Material
Started 2013-04-02 by utriversong
Foil transfer pcb
Started 2013-04-05 by davide_curcio_87
Test message
Started 2013-04-04 by Nuno Tavares
Orcad
Started 2013-04-02 by howard.chester
Datak Photo resist
Started 2013-04-03 by Rick Sparber
lye
Started 2013-03-30 by Rick Sparber
slightly OT: etching the OD of a cylinder to create a graduated dial
Started 2013-03-15 by Rick Sparber
RE: Copper Foil
Started 2013-03-21 by lex allen
conductive tape for TT?
Started 2013-03-15 by barthie2112
Copper foil
Started 2013-03-18 by lex allen
drill for micro drill bits
Started 2013-03-12 by Jeff Heiss
regarding hydrogen peroxide.
Started 2013-03-12 by smilingcat90254
trying to do the right thing
Started 2013-03-09 by Rick Sparber
PCB Milling bits
Started 2013-03-09 by Boman33
Re: ...
Started 2013-03-11 by Brian Pingree
Epson R800 and inks
Started 2013-03-07 by Trevor
[Homebrew_PCBs] A different PCB etching method proposal
Started 2013-03-02 by earlannis
Laminator recommendations
Started 2013-03-02 by w9ran
[Homebrew_PCBs] conductive epoxy
Started 2013-02-18 by Mark Lerman
[Homebrew_PCBs] Vinyl Cutter Conversion
Started 2013-02-27 by Mark Lerman
New PCB etching method proposal
Started 2013-02-28 by Derek
UV LED differences
Started 2013-02-26 by James
PCB-Milling
Started 2013-02-24 by Hans
Falambi/Pavo HD 320 laminator
Started 2012-12-21 by rolynd33
flatbed scanner lamps
Started 2013-02-23 by dave_donlan
DIY pcb exposure box UV tl
Started 2013-02-22 by Hari Hendaryanto
Mektronics in Sydney .au: source of 0.8mm copper-clad FR4
Started 2013-02-20 by Robin Whittle
Track widths, current and maximum temperature rise.
Started 2013-02-20 by scubadogct
Etching woes: Press-n-Peel, Laminator, Etch Tank + Sodium Persulphate
Started 2013-02-19 by phil.quinton@ymail.com
soldering surface mount without solder resist.
Started 2013-02-14 by scubadogct
Surface mount heat sinks
Started 2013-02-16 by scubadogct