AN1xEdit bulk dump problem with usb midi and windows 7
2011-01-15 by lancerael
Hi there, I ve recently brought my AN1x out of hibernation and I m trying to get everything set up. My current computer doesn t have a joystick port so I ve
Messages
Browse messages
Page 31 of 268 · 13386 messages matched
leads
2011-01-15 by spaceanimals
Hi I posted 8 leads. I ll post more as I get to them. Make sure you try the ribbon controller. Thanks Jimmy
Re: posting patches
2011-01-13 by jondl_2000
... If you have a compression utility, you can .zip the file prior to uploading. This makes it faster to download on a slow connection. There is ample storage
Re: [AN1x] posting patches
2011-01-13 by enrique c.
bring them out! 2011/1/13 spaceanimals ... [Non-text portions of this message have been removed]
posting patches
2011-01-13 by spaceanimals
I have some lead sounds for folks to start off their new year. I ve got the files saves in AN1X edit. I haven t posted any sounds in quite awhile. Do I just
Re: [AN1x] It pops and crackles! Is it gonna die?
2011-01-10 by millsmike36
It solved my problem straight away and its not that difficult to do... took me longer to unscrew the screw ont he case than the upgrade
Re: [AN1x] It pops and crackles! Is it gonna die?
2011-01-10 by Jeff
Hi ! do you use the mod wheel for scene morphing ? Cheers. J.F.
Re: [AN1x] It pops and crackles! Is it gonna die?
2011-01-10 by Peter Korsten
... Your AN1x is not going to die. This is a well-known issue, that can be resolved by installing an OS update. But this involves swapping chips, so it s
Re: [AN1x] It pops and crackles! Is it gonna die?
2011-01-10 by Uwe
I´m back after all My blip problem did not solve yet, but I found out, that it only appears, when a sound is selected, that uses both scenes. As far as only
Re: AN1x & AN200 in tandem
2011-01-06 by Lee
... hello, i dont own a an200 but i have the an1x. if i had both i would try loading in the same synth patch on both and set up a control in the matrix to
Re: Ribbon Controller Repair?
2011-01-05 by ubergvx
... I ve been ignoring the problem, so it s still there. Also been ignoring checking this group - it s the holidays - I ll be better. ;-) Unless you (or
Re: [AN1x] Very weird problem with MAudio Fast Track
2011-01-01 by Nathanael King
Not knowing the fasttrack, it sounds like if you plugged one channel into the input, and one into the output, you may have created either a feedback loop or
Re: [AN1x] Very weird problem with MAudio Fast Track
2010-12-31 by solaristica01
I figured out what it is I believe. I need to have just one output cable from the AN1X, since M-Audio Fast Track is mono. I unhooked one of the sides just to
Re: [AN1x] Very weird problem with MAudio Fast Track
2010-12-29 by Nathanael King
it ll only work the the delay all the way up seems like some sort of strange latency issue with the fast track. have you tried other instruments through the
Very weird problem with MAudio Fast Track
2010-12-29 by solaristica01
Recently I can only hear the AN1X through my Maudio Fast track interface if both delay, or the dry+wet values are raised all the way up in the synth. it is the
Re: Ribbon Controller Repair?
2010-12-28 by etrinity
... Sorry I m late with this reply... are you still having ribbon controller problems?
CC KNOBS NUMBERS on AN 200 - can i change it?
2010-12-23 by dan
Hi, since the AN200 knobs can transmit control change messages (CC numbers) i would like to know if is it possible to modify the cc numbers sent by that knobs.
Re: LCD Replacement Question
2010-12-15 by djmikemills
Id also like to know the answer to this... having just got one of these beasties.... it would be nice to have a brighter display or even replace the display...
LCD Replacement Question
2010-12-15 by yamahaan1x
Good day AN1x rs I was just wondering if anyone knows of a suitable LCD replacement for the AN1x. Mine still works fine but the back light is getting a little
Re: using the free eg with assignable knobs
2010-11-30 by rlouve_macharvin
I had a problum like this a whiles ago. the knob 4 on my AN1x became unsable & values would jump randomly all over the place. turns out this is because the
using the free eg with assignable knobs
2010-11-30 by spaceanimals
I have a bad knob on the AN1X. When I try to edit parameters, knob 5 wiggles on its own, changing parameters I don t want changed. I can work around this
AN1x & AN200 in tandem
2010-11-23 by Erkki
Hello, I´ve had an1x for years and years and just got an an200 yesterday. I´m just curious if there is anyone with both of these machines and what are some
Click/Pop Glitch with Layer Panning?
2010-11-14 by Evan Brito
This is my first post on this group, so greets to everyone. I ve enjoyed my An1x for many years, and I m happy to be joining the rest of you on this board. I
Re: [AN1x] internal battery replacement
2010-11-14 by boogie_koski
... And If,.. Your new battery don t go into it s place, just go and exchange/buy new one from different manufacturer. Usually they match, but not 100%. I
Re: [AN1x] internal battery replacement
2010-11-14 by Jeff
... Right, but beware of short circuits ! Be _very careful_ with the screwdriver and other metal parts (screws, nuts...) when doing like that...some chips
Re: [AN1x] internal battery replacement
2010-11-14 by ubergvx
... Yeah, opening the case is simply a matter of removing the screws on the bottom - lots of them! No need to keep track of which goes where; they re all the
Re: [AN1x] internal battery replacement
2010-11-13 by Summa
Just open up the bottom of the synth, it s mostly CR2450 and not the usual CR2032 in a battery holder... http://www.hilmi.de/bilder/an1x_totale_1280.jpg ... --
internal battery replacement
2010-11-13 by max
i am so sorry for such an obvious newbie question but i ve been searching the archives and searching with google, and i just wondered is there anywhere a step
Re: [AN1x] Re: QUIT PLG card to AN200
2010-11-07 by CENOBITA
Hi Manuel, Some time ago I use to have a CS6x w/ a PLG150-AN, some patches (using CS s rompler parts and FX) are stored in the CS itself, but the pure AN
Re: [AN1x] Re: QUIT PLG card to AN200
2010-11-06 by manuel ramos
Thanks Daniel and Claudio, and how about the edition, is there a troubles? i dont have the original disk for PLG150AN but for the AN200 yes. i read in the
Re: [AN1x] Re: QUIT PLG card to AN200
2010-11-06 by CENOBITA
It works, in fact the AN200/DX200 are boxed PLGs... [] s, Cláudio Falcão (CENOBITA)
Re: QUIT PLG card to AN200
2010-11-06 by dlehtihet
... Absolutely //Daniel - s30 + plg150an
QUIT PLG card to AN200
2010-11-06 by manramneg
Someone has try to quit the PLG150 card in the AN 200 and put in some of the S80 or S30 synths, plug receptor. Does it works? thanks for help!
Re: [AN1x] Ribbon Controller Problem
2010-11-03 by Jeff
... IMHO : keyboard contacts and less likely keys, in case of a broken one... But i suppose these parts are still used in today Yamaha (or other brand)
AN1x OS V1.04 Roms Still Available from yamaha
2010-11-03 by millsmike36
If you order by phone through tech department they will send them for you @ £18 + Postage of £3.50 and if you send your old roms back you get the 18 quid
Re: [AN1x] Ribbon Controller Problem
2010-11-03 by ubergvx
Thanks for the links! I checked all those that I hadn t already checked; nothing there now but I ll check back from time to time. The Doepfer site has a bunch
Re: MIDI interfaces?
2010-11-03 by benfeggans
Motu Fastline works well. M-Audio Audiophile doesn t!
Re: Yamaha MU128 / PLG 150 AN, Apple Mac OS 9
2010-10-30 by ashleywhiteman
... Hi Jon Yes the MU128 Can connect via midi or a serial 8 connector to DB9 serial. Which I can plug into the PC Atari or MAC Thankyou for the pointers to the
Re: [AN1x] MIDI interfaces?
2010-10-30 by somethingkillingyou
hi, I have a focusrite saffire pro40... wonderful audio interface, but its built in midi interface is crap. I use external sequencers (quasimidi sirius and
Yamaha Mu128 / AN 150 PLG / PLG150PC
2010-10-30 by ashleywhiteman
Hello, I am looking for software to use the MU128 / PLG150AN and PLG 150 PC ( Latin Percussion ) On the IBM PCee Apple Mac OS 7-9 or OSX and The Atari ST under
Re: [AN1x] Ribbon Controller Problem
2010-10-30 by Jeff
You can take a look at: http://www.doepfer.de/home_e.htm they sell synthesizer kits and parts, maybe you can find something equivalent, these ribbon
Re: [AN1x] Ribbon Controller Problem
2010-10-29 by jammie
have you got the production number as most things are made by indepandant manufacturers ... From: ubergvx To: AN1x-list@yahoogroups.com Sent: Friday, October
Ribbon Controller Problem
2010-10-29 by ubergvx
Follow-up to previous posts about AN1x ribbon controller: I pulled mine (simple mechanical process, remove 4 screws & unplug a flat cable) but couldn t make it
Re: MIDI interfaces?
2010-10-27 by rlouve_macharvin
Midisport 4x4 for me, has worked with midi notes, midiclock, CC s, & SysEx dumps (too & from) never had any problums with it. sy (www.stoltz.co.uk)
Re: MIDI interfaces?
2010-10-27 by ubergvx
Yamaha UX16 has worked flawlessly for me, including bulk dumps.
Re: [AN1x] MIDI interfaces?
2010-10-25 by Erkki
Ok, thanks everyone for your replies. Has anyone had any bad experiences? Some specific brand/model to avoid? -Erkki
Re: [AN1x] MIDI interfaces?
2010-10-25 by jammie
like i said i use it for all my synths young and old i have fm synths that only do bulk dumps i use it to tranfer samples by sysex for old samplers 12bit i use
Re: MIDI interfaces?
2010-10-25 by derek192603
Hi, I use a MOTU MIDI Express 128, 8*8 USB MIDI Interface and it works fine with the AN1x Now, one problem that you have alluded to is that some drivers for
RE: [AN1x] MIDI interfaces?
2010-10-25 by `Burns
I use the same setup for several synths and do bulk dumps etc. Basically never had a problem with anything. Here’s that flawless part you’re looking for.
Re: [AN1x] MIDI interfaces?
2010-10-25 by Erkki
OK but can it handle bulk dumps. I remember that there used to be some problems - maybe due to large file size of an1x programs... -Erkki