Re: [AN1x] MIDI interfaces?
2010-10-25 by jammie
i use a midi sport 4x4 works great with all my synths old and new made by midi man ... From: Erkki To: AN1x-list@yahoogroups.com Sent: Sunday, October 24, 2010
Messages
Browse messages
Page 32 of 268 · 13386 messages matched
MIDI interfaces?
2010-10-24 by Erkki
Hi, I´d like to know are there any USB midi interfaces that work flawlessly with an1x? -Erkki
Re: [AN1x] Setting up An1xedit to receive bulk dump
2010-10-24 by Andrei Liviu
Thanks for the quick reply. The MIDI port works and is recognized; that s all I need to do right? But then when I send bulk from the An1x nothing happens on
Re: Setting up An1xedit to receive bulk dump
2010-10-24 by Erkki
Hello Andrei, Just forget what the manual says ;-) In anixedit press receive button on the right. You have to select the slots in the editor where you want to
Re: [AN1x] Setting up An1xedit to receive bulk dump
2010-10-24 by Jeff
Hello ! first, make sure that your MIDI port works, and is recognized by AN1x edit (SETUP menu - MIDI port setup). If you only want to store temporarily all
Setting up An1xedit to receive bulk dump
2010-10-23 by Andrei Liviu
Hi all, This may be somewhat of a novice question. I recently got myself an An1x and gradually replaced many presets with my own patches. I m trying to save
OT: The Pleasure Principle 2010 Tour
2010-10-21 by jondl_2000
Last night I saw Gary Numan perform at the Black Cat in Washington DC on the The Pleasure Principle 2010 Tour. I ve been a fan since I d first heard Are
Re: [AN1x] polyphonic sequencer
2010-10-20 by Oliver Fairhall
Hey thanks, that sounds interesting. It would be a good topic for a YouTube demo. Don t know if you do that sort of thing.
polyphonic sequencer
2010-10-18 by spaceanimals
If you want to sequence chords from the AN1X, set the layer to dual so you have 4 osc, set each osc at a different frequency--I set mine up so you press one
[AN1x] Re: Sound problems with AN1x
2010-10-17 by ubergvx
I have the same ribbon controller problem described below (I just saved a couple of snippets of the longer thread). The standard advice to check & clean the
[AN1x] Re: Sound problems with AN1x
2010-10-16 by arthtrin
It is strange how Yamaha say that 700mA or over is recommended for the power supply yet when I use an old power supply that is 600mA it works better than a
Re: [AN1x] Re: Sound problems with AN1x
2010-10-15 by Jeff
Right ! Poor (or failed) voltage regulation or filtering can be the cause of these issues. If i remember a voltage regulation is implemented inside the AN1x,
scene tune
2010-10-15 by spaceanimals
I noticed the free eg controls something called scene tune . What does this mean? Thank you Jimmy
Re: [AN1x] Re: Sound problems with AN1x
2010-10-15 by Peter Korsten
... Or perhaps the signal isn t as clean as the one coming out from the other power supply. - Peter
Re: [AN1x] Re: Sound problems with AN1x
2010-10-15 by Bob S.
The switchable voltage supplies don t always provide the full rated current at the highest voltage output, it depends on how they are spec d... If you can
Re: [AN1x] Re: Sound problems with AN1x
2010-10-15 by Oliver Fairhall
Thanks for the info. I m guessing the one you bought from Maplin, doesn t really perform as specified. ... n.
[AN1x] Re: Sound problems with AN1x
2010-10-14 by arthtrin
Its been a couple of years since I started this post. I think I know what the culprit of this problem with the sounds on my AN1x were. The culprit was the
(no subject)
2010-10-12 by STEPHEN IRWIN
Co-incidence... I m about to change the battery on mine too! An1xEdit is a godsend :) [Non-text portions of this message have been removed]
Re: Yamaha MU128 / PLG 150 AN, Apple Mac OS 9
2010-10-12 by jondl_2000
... You can download the freeware Editor/Librarian AN1xEdit from the Files section for AN1x-list here at Yahoo! Groups:
Yamaha MU128 / PLG 150 AN, Apple Mac OS 9
2010-10-12 by Ashley Whiteman
Hi, I am after software to use a Yamaha MU128 and PLG 150 AN ( AN1x ) board on an Apple Mac running OS9? Can anyone help? Thankyou Ashley [Non-text portions of
Re: [AN1x] changing the battery
2010-10-11 by Jeff
Hi Jimmy ! ... Yes, it s the right type. ... Not me...i suppose there are tons of uses for these batteries (clocks, pocket electronic meters or
changing the battery
2010-10-11 by spaceanimals
I changed the battery on my AN1X this weekend. Radio Shack sells the correct battery--a 3v CR2450--used for blood pressure monitors--who knew? I hadn t used
Re: Saving Individual Patches??
2010-10-10 by CristofeC
Ok, I m a dumbass! The manual is a bit convoluted but I finally found out how to shut off mem protect. Cheers....Cristofe
Saving Individual Patches??
2010-10-09 by CristofeC
First let me say HI!! I just scored an AN200 and while I m loving it, it s also making me a bit crazy!! I ve installed and tried the various editors AN Expert,
dept of the obvious
2010-10-04 by spaceanimals
Since a VA synth is digital, I ve always thought the AN1X should have a mode that allows timbral differences from the filter and resonance changes without the
Re: [AN1x] Juno Chips - [was] va synth advice
2010-10-03 by CENOBITA
For those who need the 106 s voice chips, you ll find here: http://www.vintagesynth.com.br/ [] s, Cláudio Falcão (CENOBITA)
Extra Keys
2010-10-02 by Jerome St-Pierre
I had to replace 3 keys and I ordered 12 for a full octave so let me know if you ever need replacement keys. I paid about 30 euros for 12 so I would let them
Re: [AN1x] gear lust XL
2010-09-30 by Nathanael King
at my local guitar center (eastern pa - lehigh valley) they rarely have anything of note, though the one time i was there they did have a minimoog and I didn t
Re: [AN1x] va synth advice
2010-09-29 by audiomad99@aol.com
WOW ,.... good to hear the juno revival is back in brazil!,....a little bit at least ,.... i shoulda read the original post better before i answered ,....va is
Re: [AN1x] gear lust XL
2010-09-29 by Jon Carroll
Guitar Center Hollywood is the one most likely to have something like they and they don t. Last time i was down there they had a Minimoog, tho. ... From:
Re: [AN1x] gear lust XL
2010-09-29 by Jeff
... Hi Jimmy ! someone on this forum was planning to build a wooden cabinet for his AN1x.... i don t remember who.... If he has achieved his project some plans
Re: [AN1x] gear lust XL
2010-09-29 by Dale
GC (guitar center) in LA area might get one or two. There are other music stores that pickup these fine instruments too (LA). However, if you never touched one
Re: [AN1x] gear lust XL
2010-09-29 by Nathanael King
I saw that yesterday. the problem with these machines is there s nowhere to PLAY before you buy. I d love to get one, but for the price of a car, I wish there
gear lust XL
2010-09-29 by spaceanimals
Man, if the AN1X only looked like this--http://www.moogmusic.com/voyager/?section=product&product_id=21396 It s nice to see some people still build keyboards
Re: [AN1x] note from moderator re:unexpected incident
2010-09-29 by jondl_2000
... LOL You two are a hoot... ... Jon
Re: [AN1x] note from moderator re:unexpected incident
2010-09-29 by Peter Korsten
... Yes, getting mugged must be seriously inconvenient. ;) - Peter
RE: [AN1x] note from moderator re:unexpected incident
2010-09-28 by Ed Edwards
Having hung out with Jon a few times I found the tears in my eyes statement HILARIOUSLY out of character. Jon would probably be laughing at this if he wasn t
Re: [AN1x] note from moderator re:unexpected incident
2010-09-28 by jondl_2000
Apologies to the list. Yes, my Yahoo! email account appears to have been compromised. Whatever the cause, my Contacts in my Yahoo! email account appear to have
Re: [AN1x] note from moderator re:unexpected incident
2010-09-28 by Jon Carroll
its a standard and documented SCAM ... From: spaceanimals To: Sent: Tuesday, September 28, 2010 6:27 AM
note from moderator re:unexpected incident
2010-09-28 by spaceanimals
As the other moderator, let me caution people about sending money in response to this post supposedly from Jon stuck in London and unable to pay his bills.
Unexpected Incident !!!Jon Levinson
2010-09-28 by Jon Levinson
Hello, I m writing this with tears in my eyes, I came down here to London,England for a short vacation unfortunately i got mugged at the park of the hotel
Re: [AN1x] va synth advice
2010-09-28 by CENOBITA
There s a guy here in Brazil that make Juno s chips. [] s, Cláudio Falcão (CENOBITA)
Re: [AN1x] va synth advice
2010-09-27 by Jeff
... Our new colleague Fabio said virtual analog and was wondering about AN1x, Novation, Korg Radias etc... So we answered V.A. , with our experience of one
Re: [AN1x] va synth advice
2010-09-27 by manuel ramos
Jerome, thanks its true. have good sound-days. m ... De: Jerome St-Pierre Asunto: Re: [AN1x] va synth advice A:
Re: [AN1x] va synth advice
2010-09-27 by audiomad99@aol.com
dont know if it was mentioned but the old juno 106 is a great real analog synth ,...plus the synth spa says that they have a method to bring back the voice
Re: [AN1x] va synth advice
2010-09-27 by somethingkillingyou
software? no thanks. I use softwares for recording, mixing, mastering... but for audio only. when I want to play, I want no software around. I want no pc
Re: [AN1x] va synth advice
2010-09-27 by samuraipizzacat29
... I love my hardware (AN1X and some other misc stuff) but there are a lot of freeware vsts worth owning. I ve been fiddling with this one a lot lately - it
Re: [AN1x] va synth advice
2010-09-27 by Gerald Raucamp
... Considered DIY synths? There are a plethora of DIY synths around. x0xb0x for a 303 clone, some people are making/designing 808/202 drummachines and others
Re: [AN1x] va synth advice
2010-09-27 by Jerome St-Pierre
To Manuel: I was talking about the AN1x. Unlike the MS2000, the AN1x can send the sequence notes over MIDI. This cannot be done with the MS2000 mod sequencer.
Re: [AN1x] va synth advice
2010-09-27 by Peter Korsten
... If you have virtually no space for another synth, maybe you need a virtual synth? Mind, I don t like them myself, but I do know people who have gone from