Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Index last updated: 2026-04-14 00:15 UTC

Message

Re: How to edit individual note lengths; How to set up note lengths in step mode

2005-02-06 by malik

if i was at a 16th note resoluton then no matter if the gate was at
100% the notes would only be a 16th long? this might be my problem do
i fix that with the quantise resolution?
--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@p...> wrote:
> 
> I looked at the file in Sonar. Track 4 has two notes at with a 
> duration of 96 as follows:
> 
> 1:01:00 F5 vel = 92 dur = 96
> 1:03:96 E5 vel = 58 dur = 96
> 
> I have Sonar set to the default 384 ticks per beat. In 4/4:
> 
> 384 ticks = 1 quarter note
> 192 ticks = 1 eighth note
> 96 ticks = 1 sixteenth note
> 
> The pattern you have shows:
> 
> (1) a sixteenth note at measure 1 beat 1 tick 0
> (2) a sixteenth note (100% gate) at measure 1 beat 3 tick 96 (a 
> sixteenth of a beat after the third beat of the measure).
> 
> Perhaps you were at sixteenth-note resolution with 100% gate. I'm 
> not sure where the 76 ticks (in the previous pattern you posted) 
> came from if it was 100% gate.
> 
> Hope this makes sense.
> 
> --Steve

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.