Emu XL-7 & MP-7 User's Group

A year ago or so, I got into using Trigger Notes (latched) to turn 
arps on/off for developing a possible performance modality. I forgot 
entirely what I did, but I do notice that the trigger notes setup 
allows you to set the channel to Basic, C01A -> C16B (as well as to 
various destinations). 

Over the past few days, I have been wanting to set up my E-Mu so I 
can play tracks and triggers as arps, so I am ripe for testing your 
setup.

What are your channel settings for the triggers?

Intuitively, I am thinking of comparing rechannelize always and 
rechannelize on record to test your particular condition.

Have you tested both?  If so, any difference?

--Steve_the_diagnostician


--- In xl7@yahoogroups.com, "joepm.rm" <joe@m...> wrote:
> Just reviewing bits of the manual and appear to be stuck on pages 
26-8!
> 
> XL7, v2.0, using PX7 manual.
> 
> Setup the multichannel arps, tried to record the trigger buttons 
> to "automate your multichannel arpeggiator performance".
> 
> followed the instructions, but it's not working.
> 
> Have set triggers to seq, tracks 1-3 are set to channels 1-3 and 
> different arp presets.  with rechannelize on though, the triggers 
> only use the track in the display.  with it off, things work until 
i 
> try to record, at which point it sounds fine but either nothing 
gets 
> recorded or only one of the tracks intermittantly (as if triggering 
> the other tracks is cutting it off)
> 
> is there a known problem with this?
> 
> I've read in the tips and tricks:
> To record into the internal sequencer, set the TRIGGERS destination 
to
> be "seq" instead of "int" or "ext" This way, the triggers will be
> routed to the sequencer, which will then decide where to route it 
> based on the track settings (provided you have rechannelize on).
> 
> but it does no good.