Re: [vintagesynthrepair] Re: minimoog problem! -fixed
2005-05-07 by Dale Kay
pencil eraser, art gum erasers (good ones) etc... steel wool, no... ditto on the other posts... dale dale@inquisitorbetrayer.com Lancaster CA Are you a
Messages
Browse messages
Page 119 of 155 · 7723 messages matched
Re: [vintagesynthrepair] Digest Number 801
2005-05-07 by WeAreAs1@aol.com
In a message dated 5/7/05 3:19:14 AM, vintagesynthrepair@yahoogroups.com writes:
Re: minimoog problem! -fixed
2005-05-07 by Thomas B. Nast
*Never* use steel wool to clean up connectors. Even assuming a steel hair doesn t short out something you d rather not have shorted, you re coating/embedding
Re: minimoog problem! -fixed
2005-05-06 by daniel_muschinsky
oh oh!!! hope i didn t ruin something! i only scratched it lightly though! otherwise i ll have to replace those connectors if they start to fail... thanks for
RE: [vintagesynthrepair] Re: minimoog problem! -fixed
2005-05-06 by Brian Davies
Hi Daniel Not normally to be recommended as these connectors are usually plated with some form of precious metal, could be gold, rhodium or silver. Wirewool
Re: minimoog problem! -fixed
2005-05-06 by daniel_muschinsky
hi! just wanted to let y all know how i fixed my mini! i screwed off the bottom plate and inspected it... as i couldn t seen anything wrong i unplugged the
RE: [vintagesynthrepair] Leslie Switch
2005-05-04 by Michael Casino
Oops! The two models are E2 series and 6LMR series Mike ... From: vintagesynthrepair@yahoogroups.com [mailto:vintagesynthrepair@yahoogroups.com] On Behalf
RE: [vintagesynthrepair] Leslie Switch
2005-05-04 by Michael Casino
I m told, that the angle is too far for the telecaster type. A lever switch 30 degrees either side of center should work. Electroswitch is the current
RE: [vintagesynthrepair] Leslie Switch
2005-05-04 by Brian Fuller
I ve often wondered if the the three way switch from a Fender Telecaster guitar would work??? It sure looks the same and would have three positions
RE: [vintagesynthrepair] Leslie Switch
2005-05-04 by timothy kosiorek
Hello:You can get those switches here: http://www.goffprof.com/shopping.jsp?pg=2&b=0&c=17 But they re pricey. regards, Tim K. ... direct link to my Ebay store.
RE: [vintagesynthrepair] Leslie Switch
2005-05-03 by Michael Casino
http://www.halfmoonelectronics.com/ Hi, Does anyone out there have a Main-Ensemble-Echo Leslie switch that they would like to get rid of? I would even settle
Leslie Switch
2005-05-03 by Rich
Hi, Does anyone out there have a Main-Ensemble-Echo Leslie switch that they would like to get rid of? I would even settle for just the 3 position switch part
farfisa micro organ dilema
2005-04-30 by analogback
Hello i recently bought a farfisa micro organ,(air power) it has a brownegg blown motor and a broken fuse? (a wound coated 20mm x 60mm x 5mm thing accross the
Re: [vintagesynthrepair] Korg X3 sounds
2005-04-27 by AveMarn
ok willdo thanks
Re: [vintagesynthrepair] Korg X3 sounds
2005-04-27 by Jez
This isn t exactly a vitage synthesiser in need of repair , so this is the wrong place to ask this question. Search for Korg X3 resources.
Korg X3 sounds
2005-04-27 by AveMarn
Hi I have this Korg X3 and would like to load more piano sounds can someone please enlighten me as I have lettle knowledge how to do it but eager to know.many
Free Samples
2005-04-25 by shmaigenja
Download Free Electronica Loops at http://www.planetsample.com PlanetSample produces sample CDs catered to a variety of Electronica styles. Our CDs come in a
Re: [vintagesynthrepair] Ensoniq ESQ-1 no sound
2005-04-20 by Russ Rose
Hi Keith. I feel like I left you a little high and dry on the reinit procedure on my last post. Today is a brighter day, so here goes. While the ESQ-1 is
WTB: roland system-100m cabinets(190,191,191j)
2005-04-20 by Bakis Sirros
hello all, first of all, sorry for the many postings. i want to buy an empty roland system-100m cabinet in perfect working condition of course. i would prefer
Re: [vintagesynthrepair] Ensoniq ESQ-1 no sound
2005-04-19 by Russ Rose
After replacing the battery, you will have to reinitialize it.. If you dont know how, try getting info from ensoniq s website if it is still around. If after
Ensoniq ESQ-1 no sound
2005-04-19 by Keith Niver
I replaced the battery in this unit and no there is no sound. All the lights work. Do I have to reload all the sounds? I do not have any voice cartridges. Can
(no subject)
2005-04-16 by José Pereira
Re: [vintagesynthrepair] Re: Roland Juno 106 parts needed
2005-04-16 by Sandra Garcia
there are a couple of places to get parts--some a little expensive, but then some parts aren t made anymore so we pay. Ranger Audio is one. Route 66 Studios
Help For A Sequential Circuits Prophet 5 Rev 2.0
2005-04-16 by souldream70
Hi folks. I m a repair tech from Brazil and a lover from vintage analog keyboards. I would like to get some help for a Prophet 5 Rev. 2.0. Is there someone who
Sequential Circuits Prelude Repair Information Needed!!!!!!
2005-04-15 by the0thr1
Dose Ne1 have any info. on repairing these bad boys. Im getting one that powers up but dosent play sound. Any Suggestions??? Thanks Gabe
Sequential Prophet VS - Rack - Power supply
2005-04-15 by Detko, Ralph: OS_TDO
Hi folks, the power supply on my newly acquired VS has a mechanical buzz. So far my tech has not been able to locate a replacement. As I understand it s a
Info for those repairing the Arp Omni Mk 1
2005-04-15 by the0thr1
Here is a site that damn useful... http://www.marksmart.net/gearhack/arpomni/arpomni.html For more detail on this, search the Analog Heaven Archives.
Re: Arp Omni MK 1 Power Supply Problem
2005-04-15 by the0thr1
Yeah i ended up measuring most the resistors and most of them are off as it is. Thanks yall im gonna name my kid D-erick.
ARP Odyssey mkIII Keys
2005-04-15 by jamjr587
So I have an ARP Odyssey mkIII with about ten broken keys thanks to that wonderful overhanging key design. I am having trouble locating keys to replace them
Re: Arp Omni MK 1 Power Supply Problem
2005-04-15 by desteric
This is for the Omni powermod is suppose.. I used a 42k and it gave me plenty of room to get to the 13v figure. cheers, Eric. ... power ... would be
Re: Arp Omni MK 1 Power Supply Problem
2005-04-15 by Dave
It depends on what the resistors are being used for in the power supply, you could try them, I don t think you could hurt anything, but some of the controls
Arp Omni MK 1 Power Supply Problem
2005-04-14 by the0thr1
I just recently bought an Arp Omni Mk 1 and after gutting it out to find the problem. I ended up finding out that i need to fix the power supply. My problem
Re: Roland Juno 106 parts needed
2005-04-14 by kiefen2000
Hello, I m new here, just joined. If you haven t found the parts you need yet I have a couple of stripped 106s with those parts still intact. If you are
Re: [vintagesynthrepair] Korg DW6000 schematics and patches
2005-04-13 by Sandra Garcia
you might try NTS pro audio or Ranger Audio Chris Strellis wrote: Hi guys, Anyone got these or failing that DW8000 schematics. I
Korg DW6000 schematics and patches
2005-04-13 by Chris Strellis
Hi guys, Anyone got these or failing that DW8000 schematics. I have a beaten up DW6000 to repair and possibly modify :) Best regards Chris
Re: [vintagesynthrepair] WTB: ARP AXXE / Odyssey parts.
2005-04-10 by Russ Rose
... I have original ARP slider, only it s a little too original, meaning it s used. Removed from ARP Omni, same part number. It is good though. If you are
WTB: ARP AXXE / Odyssey parts.
2005-04-05 by transanalog
Hello all! I am in need of the VCA ADSR amount slider for the ARP Axxe or Odyssey. It is a 1M audio taper, ARP part # 5700701 also B2801-006- 1. Please,
Re: [vintagesynthrepair] minimoog problem!
2005-04-04 by James Walker
Hi D , It sounds like one of the keyboard contact springs is permanently making contact with CV buss bar . Remove the bottom cover and check to see if the
minimoog problem!
2005-04-04 by daniel_muschinsky
Hi! my minimoog started acting op the other day! it plays the same note nomatter what key im pressing! is there an easy fix, cos i m on tour at the moment,
Re: [vintagesynthrepair] Roland D70
2005-04-03 by Russ Rose
... Hey there. Is the lcd display reading normal, but there is no sound output? What more info on symptoms do you have? It may be as simple as midi local is
Re: [vintagesynthrepair] Roland D70
2005-04-03 by Tom Remi Flygel
Correction, I did find references to a service manual for sale on some website, but nothing downloadable. Check through my google search, maybe you have more
Re: [vintagesynthrepair] Roland D70
2005-04-03 by Tom Remi Flygel
I found the owner s manual on roland US website. http://www.rolandus.com/products/pdf_manuals/product_manuals_form.asp?Pdf=871&ProdId=D-70&CatId=&SubCatId= Not
Roland D70
2005-04-03 by Joshua
I just got one, everything seems to be in order, but it doesnt work. :) Anyone with access to the service manual, or a .pdf copy of it? I might need some info,
Synare 1 replacement pads
2005-03-29 by easterleggs
It s high time my Synare 1 donned four new pads. Any tried and true suppliers for that nasty ole foam rubber junk?? Or should I just cut up some mouse pads?
Re: Looking for CEM3340 and 3360
2005-03-28 by hams4handz
... Try Synthesis Technology www.synthtech.com. Also, there is a user on eBay, chipforbrains that often has Curtis chips for sale. You could also try US Bid,
Looking for CEM3340 and 3360
2005-03-28 by Tim Glasgow
The subject says it all. Anybody have any leads on where i could get a pair of CEM 3340 VCO s and/or a pair of CEM 3360 dual VCA s? --t [london, canada]
Re: Roland JV880 display
2005-03-27 by synthflake
Russ, Thanks for confirming. I pulled one end of the resistor, it is an 8.2 ohm. Leaving that disconnected upon powerup the display had graphics but ZERO
DX11 keys
2005-03-26 by gravyhook
anybody out there have a trashed yamaha DX11 that can part out keys? Yamaha can supply them, but weigh too pricey. Note dx11 keys are NOT the same as
Re: [vintagesynthrepair] Re: Roland JV880 display
2005-03-26 by Russ Rose
... Okay. I have a schematic( or as some of my customers call a sketch-0-matic) There is a resistor designated R116, one end tied to Vcc(+5 volt dc) and the
Re: Roland JV880 display
2005-03-26 by synthflake
Ok, a closer look at the display and the backlight is working, just not nearly as bright as my Korg 03R/W and Yamaha TG500. Roland told me the $115 LCD is now