post. Today is a brighter day, so here goes. While the ESQ-1 is powered on,
hold down the record button, then push the top left button of the LCD display.
When prompted, note the ROM or OS version number. Press "yes". If you are lucky
enough to have ROM ver 2.3 or higher the factory sounds will be loaded. If not
you will have a situation that I described in the last post. Good Luck, Russ
I replaced the battery in this unit and no there is no sound. All the lights work. Do I have to reload all the sounds? I do not have any voice cartridges. Can anyone help?
Keith A Niver
Yahoo! Groups Links
- To visit your group on the web, go to:
- http://groups.yahoo.com/group/vintagesynthrepair/
- To unsubscribe from this group, send an email to:
- vintagesynthrepair-unsubscribe@yahoogroups.com
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service .