Has anyone got a broken ARP AXXE. . . ?
2005-10-14 by robert andrew scott
Hi. If anyone is dying to get a broken Axxe off of their hands, let me know. . I need a couple of parts from one. I m not really interested in putting much
Messages
Browse messages
Page 116 of 155 · 7723 messages matched
Juno 1
2005-10-14 by watravis2
i have a juno-1 that is on the fritz. when i power up the lcd remains blank and the red lights come on but nothing else happens.
Re: [vintagesynthrepair] Digest Number 874
2005-10-13 by r s
accept. There is 1 message in this issue. Topics in this digest: 1. Re: Yamaha TX816 PSU Whine From: Russell Rose
Re: [vintagesynthrepair] Yamaha TX816 PSU Whine
2005-10-11 by Russell Rose
Before you go to all that trouble, try this. Open her up, loosen all screws that fasten the circuit board to the chassis(i.e., ground screws) and then tighten
Yamaha TX816 PSU Whine
2005-10-09 by bitjiggle
Hi all, I finally received the TX816 I ve been lusting after half of my life. I turn it on and after a half hour I hear a very high pitched sound coming from
Recommendations for Odyssey repair?
2005-10-07 by jimswedlund
Hello, I have an Odyssey that needs cleaning, calibrating, and restoring. Does anyone have any recommendations for a repair person for this type of work? I d
RE: [vintagesynthrepair] Micromoog Question
2005-10-02 by Mike Thompson
Yes and I m waiting to hear back from him. I trust him too, I was told very good things about him from the folks at Harmony Central. _____ From:
Re: [vintagesynthrepair] Micromoog Question
2005-10-02 by Dale Kay
Just a word in Kevin s behalf, I would trust what he says. Did you ask him what he recommends to do? dale dale@inquisitorbetrayer.com Lancaster CA Recent
Micromoog Question
2005-10-02 by Mike
Hey all. I just purchased a 1977 model Moog Micromoog in awesome condition and playability except for two small issues: The pitch ribbon no longer responds
Arp Odyssey Mk 3 key Caps
2005-10-02 by Dan Litwin
Looking for 3 keycaps for a MK3 Arp Odyssey. I ve checked Ebay, but little comes up for them. Thanks, Dan
Spare legs for old 1979 Korg CX-3?
2005-10-02 by Matty Demont
Does anyone has spare legs for an old 1979 Korg CX-3?
arp axxe -- should I part it out?
2005-10-02 by dicklesscheney
Just received an arp axxe (later model) in excellent condition but not working. problems seems simple enough to fix. result of a mod gone-awry. vca-gain slider
Re: [vintagesynthrepair] Re: ALESIS QS8 LCD
2005-10-01 by Paulo Palmieri
Ok my friend. Many thanks for your kind attention! I ll try it. Paulo Palmieri ... From: bbluthang To: vintagesynthrepair@yahoogroups.com Sent: Friday,
Re: ALESIS QS8 LCD
2005-10-01 by bbluthang
... LCD? ... try alesis - they helped me recently with my qs7, seems they are still smalll enough to care. @
Fw: Farfisa Compact Duo Replacement Keys
2005-09-27 by Brendan Haley
Hey all, I just joined the group, and I will jump in feet first. I somewhat desperately need to track down replacement keys for the upper manual of a Farfisa
Need: Farfisa Compact Duo Replacement Keys
2005-09-27 by Brendan Haley
Hey all, I just joined the group, and I will jump in feet first. I somewhat desperately need to track down replacement keys for the upper manual of a Farfisa
RE: [vintagesynthrepair] Hammond M-2 1/4" modification help needed...
2005-09-26 by Michael Casino
This is used by a lot of people http://www.dairiki.org//HammondWiki/LineOutFromASpinet mike
Hammond M-2 1/4" modification help needed...
2005-09-25 by Charleville
Hello all! I have an M-2 that I am wanting to hook up a 1/4 jack so I can run it through a variety of pedals (Rotosphere for the Leslie effect, etc.) and then
Re: Spare keys for Solina String Ensemble?
2005-09-25 by Matty Demont
I am still looking for the key D6 for my Eminent Solina String Ensemble, first version. To give you all an idea how this key looks like, I posted a picture
ALESIS QS8 LCD
2005-09-23 by souldream70
Hi Everyone. Please,Is there someone who knows where I can find the Alesis QS8 LCD? I m repairing this one...The LCD lights on and that s all. Any help would
Re: [vintagesynthrepair] ARP Odyssey contact springs
2005-09-21 by vid1616
I ve used guitar strings to replace the keyboard contacts on my Ensoniq Mirage...worked like a charm. vid
Broken Leslie.
2005-09-21 by Mark Anthony
Thank you Tim, who has great manuals and midnightrocker for directing me to the area of the 0C3 tube. This information, helped in locating the defect within my
ARP Odyssey contact springs
2005-09-21 by clavD6
One of the contact springs broke off. What can I use to replace it, a bit of guitar sting? Thanks, Stewart rhodes54@mac.com
Re: ARP Ody clone help req
2005-09-21 by WeAreAs1@aol.com
In a message dated 9/20/05 2:48:14 PM, VallebonaPaolo
ARP Ody clone help req
2005-09-20 by VallebonaPaolo
Hello, I am trying to design a homemade clone of an ARP Odyssey, but I already had some difficulties in finding components. Anyone has suggestions about where
LCD for Ensoniq QS8
2005-09-19 by souldream70
Hi all. Please,is there someone who knows where can I find the LCD display from the Ensoniq QS8?Is it an expensive cost part? Any help will be welcome!Thanks
ARP Solus thump
2005-09-17 by easterleggs
Another question for you more knowledgable than I: Could the ARP VCA thump I ve read about on the Omni also apply to the Solus? If so, does this require a
Octave Cat S/H
2005-09-17 by easterleggs
Hello, all. The sample and hold on my Octave Cat suddenly will not respond properly to respective pot information. For instance, the VCO sample and hold
sh101/mc202 osc sync and other mods
2005-09-15 by retro_stu
hi has anyone ever added a osc sync input to either a sh101, mc202 or cmu810? is it simply a matter of removing the capacitor at pin 9 of the cem3340 and
Re: [vintagesynthrepair] Re: Spare keys for Solina String Ensemble?
2005-09-15 by Igor Obrenov
You re welcome, Matty! Try to contact him via this form: http://www.ultraelectronicactive.com/inquiry.htm and please send results... OK? With Kind Regards,
RE: [vintagesynthrepair] Phono cartridge for spring reverb of Farfisa Compact
2005-09-15 by timothy kosiorek
Hello Matty:I have a lot of different spring reverbs that I usually sell for $10.00 + shipping most of them are from Hammond organs but I do have a variety,you
Re: [vintagesynthrepair] Phono cartridge for spring reverb of Farfisa Compact
2005-09-14 by John Keeley
Check out Antique Electronic Supply.I know they have several spring reverbs listed. web site is tubesandmore.com Later ........Keeley Matty Demont
Re: Spare keys for Solina String Ensemble?
2005-09-14 by Matty Demont
Thanks Igor. I sent him an email but it returns. Apparently his email is not working, or is it just starjourney@yahoo.com? ... repairing some keyboards. My
Re: [vintagesynthrepair] Spare keys for Solina String Ensemble?
2005-09-14 by Igor Obrenov
I m new member of this group, too. Few days, ago I ve started with repairing some keyboards. My name is Igor Obrenov and I m from Serbia... I will introduce
Phono cartridge for spring reverb of Farfisa Compact
2005-09-14 by Matty Demont
The spring reverb of my Farfisa Compact combo organ is defect. It appears to be due to a broken phono cartridge. The cartridge is: Acos GP 71. Where can I find
Spare keys for Solina String Ensemble?
2005-09-14 by Matty Demont
Hello, I am new to this group. Does anyone have some spare keys for my Solina String Ensemble? I have a broken key which I would like to replace.
which DeoxIT for trim pots?
2005-09-13 by David
Hi Gang, I bought a chromatic tuner for my 2600 so I can calibrate the VCO s. I wanteed to clean them first so I called Caig Labs to find out the best product
edp gnat dead
2005-09-11 by atuzzi
I need a service manual... the gnat has a dead keyboard Is triggering just one time, when is turned on (and not on every key). all the functions seems to be
moog source
2005-09-09 by oxygeno1313
Hi all, i have a problem with a moog source... it was working very good, and one day the OSC 2 went out of tune, i tryed to calibrate the OSC 2 but i cant get
musicians for katrina relief cd.
2005-09-09 by Bakis Sirros
hello all, :-) Musicians for Katrina Relief CD Project The Musicians for Katrina Relief CD Project is a coalition of international musicians using their
Re: [vintagesynthrepair] Re: Help.
2005-09-04 by Roy J. Tellason
... That s *NOT* a rectifier tube, it s a voltage regulator... What Leslie are we talking about here, a 122 or something? -- Member of the toughest, meanest,
Re: Help.
2005-09-04 by rockthenightrt3
... Which Leslie do you have? If it is a tube type most likely it is the rectifer tube which is a OC3 in a 147. I had the same trouble with one of my 142s and
Re: Korg DW-6000 Original Factory Preload Programs
2005-09-01 by Chris Strellis
Hi Kiefen, ... DW-6000. Good work, perhaps you want to join/post to the DW8000 yahoo group? I recently got a battered DW6000 and fixed her up. I also modified
Re: [vintagesynthrepair] Korg DW-6000 Original Factory Preload Programs
2005-08-31 by robertgs
That¹s great... I bought a DW-6000 a while ago, what a great synth it is! Mckewans ... Re: [vintagesynthrepair] Korg DW-6000 Original Factory Preload Programs
Korg DW-6000 Original Factory Preload Programs
2005-08-31 by kiefen2000
Hi I just uploaded the original factory preload programs for the Korg DW- 6000. They are in three file types : sysex, SoundDiver and WAV, with some basic
Thanks, Tim.
2005-08-27 by Mark Anthony
I want to say thanks for your responding to my request, timothy kosiorek. I ll try to find it and see what I can do....... Mark........
Re: Digest Number 850
2005-08-26 by robert andrew scott
Thanks to everyone for their responses ! Not only does my Mono/Poly use V/Oct. . but the Trigger on the Mono/Poly is switchable between Negative and Positive.
Re: [vintagesynthrepair] Digest Number 850
2005-08-25 by Tom Remi Flygel
Opps, sorry for the bad advice then, I thought ALL vintage Korg s were the same :) ... From: WeAreAs1@aol.com To: vintagesynthrepair@yahoogroups.com Sent:
Re: [vintagesynthrepair] Digest Number 850
2005-08-25 by WeAreAs1@aol.com
In a message dated 8/25/05 1:10:06 AM, Jez writes:
Fw: [vintagesynthrepair] moog prodigy. .
2005-08-25 by Tom Remi Flygel
Little addition, make sure you ve connected the CV out-in aswell. I didn t from the CS-5 - MS-10, which resulted in only the noise generator working (as that