Octave Cat S/H
2005-09-17 by easterleggs
Hello, all. The sample and hold on my Octave Cat suddenly will not respond properly to respective pot information. For instance, the VCO sample and hold controls will now only tune the oscillators. I've checked the socketed IC's in the S/H circuit...they seem ok. Is there a multiplexer for the S/H pot data that could be the culprit? If so I couldn't really identify it from the schematic. Or is the problem related to the sample and hold circuit not receiving a timing signal from the LFO? Thanks in advance for any tips. --Stephen Nichols