Re: [PolySix] factory sounds
2005-10-06 by Seppo Sipilä
... It s possible - have someone with knowledge of electronics open the thing up and check that the tape in wires are connected at both ends and the socket
Messages
Browse messages
Page 93 of 114 · 5658 messages matched
Re: [PolySix] Fixed Power Supply but still no sound
2005-10-06 by Seppo Sipilä
... The battery leak on my Polysix was very hard to see, but it damaged the memory circuit board and the nearest chip underneath so that I had complete sound
Re: [PolySix] factory sounds
2005-10-05 by David Davis
using these old machines liked you to tweak the tone control on your little cassette recorder - turning it towards the treble - computer soundcards tend not
Re: [PolySix] Fixed Power Supply but still no sound
2005-10-05 by Mike Höhn
... Has the battery leaked? Have you already fixed it? Without the battery and with all parts around the battery ok, the Polysix functions 100%, it only can t
factory sounds
2005-10-05 by meezy78
Hi, I am trying to reset the factory sounds on my polysix. I have downloaded the data (.wav of the original tape) from http://analog.no/ and have followed
Fixed Power Supply but still no sound
2005-10-05 by lnz2166
I back again. I was able to track and find the problems with the power supply. Replaced the Regulator and transistor and my outputs are good and stable.
Re: no sound on polysix
2005-10-02 by lnz2166
... that my power supply -15v and -5v were shot. I m still trying to figure out why but check those voltage via the test point on the power supply board to see
got used polysix and power supply is acting weird
2005-10-02 by lnz2166
Hello PS6ers. Just got one of these babys which looks great with my Sigma. I bought this thing knowing it didn t work hoping it was a battery problem but I
Re: Tuning Problem
2005-09-21 by darke_one666
Hi all again, Just to let you know that it was in fact the opto on the oscillator board. I have several of these boards with the same problem and this has been
Re: Polysix replacement wood panels
2005-09-14 by darke_one666
The side panels are part of the lower wooden case and are not available seperately. You will have to do some woodwork or get a chippy to sort this for you ;---
Re: i need new ic2
2005-09-14 by darke_one666
... If the battery leaked then it is likely that IC30 & IC31 on KLM367 will need replacing. You may have some tracks that have corroded too that will need
tuning problem!
2005-09-13 by Ian Bradshaw
I have an old P6 that I m restoring. I ve manged to get every part working but the damn thing will not tune. I substituted the voice board and CPU board over
Tuning Problem
2005-09-13 by darke_one666
I have an old P6 that I m restoring. I ve manged to get every part working but the damn thing will not tune. I substituted the voice board and CPU board over
I'm looking for a MIDI-kit for my polysix
2005-09-05 by wildjamin
excuse me, this is probably asked all the time.. I just checked the ricard/johannes hausensteiner thing. (it sounds really cool, but some links broken - it
Out of tune
2005-09-03 by makefrench
Hi everyone, I just recently found this group and I think its great. I have had my Polysix for about six months and have had nothing but problems, such as
Re: [PolySix] Re: Would like to trade a SSM2044 for a SSM2056
2005-09-02 by akira honda
just one gil_we wrote:How many of them for the 40$ ? ... S&H to your country .. i m from mexico city... or if you have other parts for synth
Re: Would like to trade a SSM2044 for a SSM2056
2005-09-02 by gil_we
How many of them for the 40$ ? ... S&H to your country .. i m from mexico city... or if you have other parts for synth maybe we can trade.. i don t accept the
Re: [PolySix] Would like to trade a SSM2044 for a SSM2056
2005-09-02 by akira honda
i have 5 SSM2056 if you want i can sell it for 40 dlls including S&H to your country .. i m from mexico city... or if you have other parts for synth maybe we
Would like to trade a SSM2044 for a SSM2056
2005-08-24 by gil_we
I basically am looking for a SSM2056, I do have one SSM2044 if anyone is interested to trade. gilwein(at)walla.co.il
RE: [PolySix] Broken Oscillator (update)?
2005-08-21 by Mike Thompson
My P6 self-modulates (if that’s the right term)… Basically it was fine until I literally moved it to another room and then turned it on (something
Re: [PolySix] Broken Oscillator (update)?
2005-08-21 by Mike Höhn
... I replaced one of the IC s near the battery, which had black legs. Apart from that the whole board really looks ok, even the the traces. And I checked
Polysix replacement wood panels
2005-08-21 by seekwhensir
Hello my newly founded Polysix fam, My first P6 I resentfully flipped on ebay a few months back..It was all banged up. Battery leakage, out of tune engine,
Re: [PolySix] Broken Oscillator (update)?
2005-08-21 by mike thompson
When you replaced the battery did you also go through all the trace repairs too? I didn¹t and think that¹s why I still have an issue with mine, though my
Broken Oscillator (update)?
2005-08-21 by mhoehn303
Here s a little update on my Polysick: The out-of-tune oscillator even plays lower notes when set to 4 . But even when set to 8 , with LFO on the VCO, on
Broken Oscillator?
2005-08-19 by mhoehn303
Hello, I m new here and I m glad this mailing lists exists. I hope someone is reading. :) I had bought a Polysix from a friend who had it standing around for a
Still have problems with my synth
2005-07-22 by Mike
This thing still acts up really bad... I replaced battery, diode and removed the capacitor, all seems ok. still no good. the synth will not play the notes
Re: hello all
2005-07-21 by glocka respirator
well the synth is programmable so it doesn t matter how bad the presets are, you know?..... ... ___________________________________________________________
can anyone point me in dirrection of good downloads
2005-07-20 by ajscent1
hi i have taken all the ones available within the files section here, but greedy as i am , i am looking for more... does anyone know the best place to find
hello all
2005-07-20 by ajscent1
hi list, just got my first polysix, thanks for all the useful info in this group, it was delivered with a pathetic sound pallete, someone had done there
which midi kit to buy?
2005-07-20 by roland_jx10
I want to buy a midikit for my polysix so i was wondering what is available and what´s good or not. Any advice would be apreciated.
RE: [PolySix] no sound on polysix
2005-07-17 by Mike Thompson
Mine does a similar thing, and the voices I load into it do not sound like they should. I already replaced the battery and that didn t fix the problem. I ve
no sound on polysix
2005-07-16 by czmok
Hi all, i just bought my first Korg Polysix from the first owner. Unfortunately (well he wrotes in his Ebay Page) the Korg does not make any voices, just keeps
Re: i need new ic2
2005-07-07 by gil_we
I guess adjusting the Reset Adjust trimmer could solve the problem, but you ll have to verify. This is how I solved it on my Trident.
Trident - oscillator tuning problem
2005-07-06 by gil_we
On my Trident MKII, the 7th oscillaor takes time to get in tune. Actually, the first few minutes it rises up slowly, to a much higher tune than the general
i need new ic2
2005-07-05 by fmulassano
Hi folks, my name is francesco from italy.... i have repared my poly6, but all led is on.... oldcrow says bad cpu... possible solutions? sorry for my
OT: Juno 106 doesn't start
2005-07-01 by gil_we
When turning it on, all leds lite up, no sound. I checked the voltages and instead of 15v there are only 3.7v measured at the PS. I found that the 15v voltage
AW: [PolySix] Re: problems importing / exporting patch dumps into Patch Manager P6 format
2005-06-24 by olgu@tiscali.de
Hi Rich, thanks for the thanks - you re welcome. Your device has seen some adventures so far, good luck for the future! BR, Olaf ... Patch ... It all
Re: problems importing / exporting patch dumps into Patch Manager P6 format
2005-06-24 by hoggybogger
It all works now!!! WOW. Many thanks to Olaf for emailing me some tips - it was the output/input volume, my levels were too high. I checked them in Adobe
AW: [PolySix] problems importing / exporting patch dumps into Patch Manager P6 format
2005-06-22 by OlGu
Hi, I ve tried to upload some of your files from PC soundcard to P6: it works fine. Great patches - it s worth doing some work! I had no time to try the
Re: [PolySix] problems importing / exporting patch dumps into Patch Manager P6 format
2005-06-22 by dko4342@vip.cybercity.dk
On Tue, 21 Jun 2005 22:41:33 -0000, hoggybogger wrote ... You should experiment with the volume of the signal. If you can t get it to load, then try to
AW: [PolySix] problems importing / exporting patch dumps into Patch Manager P6 format
2005-06-21 by olgu@tiscali.de
Hi Rich, I deleted your mail, because it locked my mailbox (it was to big). Anyway, I have downloaded the files and I try soon to import. You ll hear from
problems importing / exporting patch dumps into Patch Manager P6 format
2005-06-21 by hoggybogger
I have eight or so different patch dumps in WAV format that i m trying to load into the Patch Manager program. I can load them just fine as WAV files out of
Re: users manual
2005-06-14 by glocka respirator
It s in the files section, here http://launch.groups.yahoo.com/group/PolySix/files/ ... ___________________________________________________________ How much
Anyone ever have work done by Greg at Analogsynthservice.com?
2005-06-14 by Mike
I m thinking about sending my P6 out to him and I heard some good things about him from the folks at harmony central forums. Anyone here have any experience
users manual
2005-06-14 by groovedoctor23
Is there any place on the internet where I can get the polysix users manual for free? / tommy
Replaced my battery, don't think it fixed the problem
2005-06-12 by Mike
I m still having an issue with my poly. I replaced the battery, removed the cap, and replaced the diode like in old crow s directions. I did not replace the
Re: Can't find any battery holders for the poly at radio shack
2005-06-11 by gil_we
I took some out of old PC motherboards, they fit perfectly (both in my Trident an Polysix). There are also Lithium battries that have legs connected to them
Looking for the plastic part surrounding the pitch/mod wheels
2005-06-08 by Francois Rossi
Hi All, I m still looking for the plastic part that surrounds the pitch and mod wheels, mine is too badly broken to be glued together. Email me your offer.
Hello to all !!!
2005-06-08 by jelgstrand
Im a new member to the list , so here is a quick pres, My name is Jakob , i live in Sweden and will collect my Polysix tomorow and i hope that i will enjoy
RE: [PolySix] Can't find any battery holders for the poly at radio shack
2005-06-07 by Mike Thompson
Awesome! Thanks man, I ordered about 3 of them for the price, I might as well have in case I break one or something. Really appreciate the link. Now I can get