Re: OK...so what WILL you buy assembled?
2010-05-03 by IvanCU2
Actually, build quality is part of what I feel I m paying for with MOTM. Ivan
Messages
Browse messages
Page 28 of 690 · 34488 messages matched
Re: [motm] Re: MOTM-130
2010-05-03 by Paul Schreiber
Paul once said that the MOTM-1190 (frac VCA) is the core for the MOTM-130. It looks MOTM-130 might be two VCAs rather than two Q111s. This is an accurate
Re: MOTM-130
2010-05-03 by nnovele
Paul once said that the MOTM-1190 (frac VCA) is the core for the MOTM-130. It looks MOTM-130 might be two VCAs rather than two Q111s. Girts
Re: Tempco 1K 3300 ppm
2010-05-02 by peter_ivens
Yes but they don t mention a temp. coeff. nor do they refere to MOTM under the item so i think it is another coeff. (Miquel, sorry for the three replies my
RE: [motm] State of the Euro
2010-05-02 by Greg James
Scott Deyo has told me he s working on a MOTM version of this: http://yusynth.net/Modular/EN/MIXOUT/index.html -Greg _____ From: motm@yahoogroups.com
RE: [motm] State of the Euro
2010-05-02 by John L Rice
Is there a feature and functional description of the MOTM-130 somewhere? Is it similar to the Q111 only 2 devices behind the panel instead of one? John L Rice
Re: [motm] State of the Euro
2010-05-02 by Scott K Warren
I d buy two MOTM-130s! -- skw Sent from my iPhone
Re: [motm] Tempco 1K 3300 ppm
2010-05-02 by Miguel Mendoza
Bridechamber has them: http://www.bridechamber.com/bridechamber.com/Hard_2_Find_ICs.html From: peter_ivens Sent: Sunday, May 02, 2010 11:48 PM To:
Re: Tempco 1K 3300 ppm
2010-05-02 by wjhall11
My 2 beads: Ask Mr Shreiber (Paul) - or Bridechamber. If you need help with some of the caps, etc, I can take a look at the BOM, etc later this PM and suggest
Tempco 1K 3300 ppm
2010-05-02 by peter_ivens
Hello, i am searching for a supplier for the 1K 1% 3300 ppm tempco as used in the MOTM-440 & 485. Can somebody show me the way? Thank you, Peter
MTOM thoughts per Will
2010-05-02 by wjhall11
All - In 2005, (when I was 13) we began the process of trying to replace the Synthi-A my Dad had reluctantly sold years prior. At the time, EMS wasn t really
State of the Euro
2010-05-02 by Paul Schreiber
If the small Euro Frequency Shifter sells the same as the E340 & E350 then I will have money for 4 more 5U modules (the CG, the MT and 2 other ones). If I can
Re: Wire a big deal?
2010-05-02 by wjhall11
Hey All - This wire issue isn t really applicable for the 2.0 builder unless they re counting on getting their wire in the form of the little wire extra parts
Re: [motm] The end of the long lead time?
2010-05-02 by Jim Black
How is the Euro module business progressing? Will it provide the necessary funding for R&D and continuation of the 5u? ... I can now build up 1 Euro module
Re: [motm] Panel thickness change? :-(
2010-05-02 by Andre Majorel
... 2.3 mm sounds a bit thin for 5U. Then again, it depends on the alloy. Some are fairly stiff. The only way to know for sure is to cut a piece of 1U x 5U of
RE: [motm] Wire a big deal?
2010-05-02 by Greg James
I, for one, would have no problem getting a loop of wire in my kit and take it upon myself to cut, strip and tin them as needed. Do the twisted pairs have a
Re: [motm] Panel thickness change? :-(
2010-05-02 by Scott K Warren
No way!! Sent from my iPad ... No way!! Sent from my iPad On May 2, 2010, at 12:28 PM, John L Rice wrote: So Paul, you mentioned over
Wire a big deal?
2010-05-02 by Paul Schreiber
... Call those same people up and ask for the price of 300pcs of: a) 6 of RG-174 stripped and tinned b) 6 long of 22ga red/black twisted wire, stripped and
Re: [motm] The end of the long lead time?
2010-05-02 by Miguel Mendoza
Hi Paul, there can be many strange people around there but me personally would buy a minimum of one typical MOTM module every two months if I could have it
RE: [motm] The end of the long lead time?
2010-05-02 by Greg James
OK - so putting this in a personal context: I m in my early 50s. My actuarial life expectancy is something around 72, so, like 20 years give or take (in my
Re: [motm] The end of the long lead time?
2010-05-02 by Paul Schreiber
70 modules/year? Really? And there s still a backlog? The backlog was at one time 916 modules. It s around 72 right now. Paul S.
Re: [motm] The end of the long lead time?
2010-05-02 by Paul Schreiber
The one time buyer is more important to figuring out what s wrong with SynthTech, then the faithful MOTMer. Some of those people were very likely to become
RE: [motm] The end of the long lead time?
2010-05-02 by Greg James
I m missing something Paul. What s the big deal about wire? I know I m missing something cause I can get wire all over the place. -Greg ... From:
RE: [motm] Panel thickness change? :-(
2010-05-02 by John L Rice
So Paul, you mentioned over on Muff’s forum: “I am seriously thinking to make all new modules from 0.090 aluminum instead of 0.125. The cost drops quite a
Re: [motm] The end of the long lead time?
2010-05-02 by Dave Manley
70 modules/year? Really? And there s still a backlog? In a previous email you gave a breakdown of different customer types: those with a large number of
Re: [motm] The end of the long lead time?
2010-05-02 by Thomas White
Synthgeeks and musicians thirsting for new tech are impatient. IMHO you now sell 70 modules a year due to simple supply and demand. The demand was there. 1200
Moog 914 fixed filterbank owners
2010-05-02 by JH.
Hi, is there anybody on the list who owns a Moog 914 Fixed Filter Bank and could do me a little favor? I have schematics with the capacitor values missing. I
The end of the long lead time?
2010-05-02 by Paul Schreiber
... Well for one a moderate MOTM system doesn t cost the same a new car like a Moog 35 did in 1971. The only way to get really short lead times is to go SMT
RE: [motm] OK...so what WILL you buy assembled?
2010-05-02 by John L Rice
My vote for the next up modules are the MOTM-600 uSeq and the 1U BP filter! That said, I know it would be a fair amount of time and money, but . . . I think
Re: [motm] OK...so what WILL you buy assembled?
2010-05-02 by Jeff Laity
... Paul, I m one of your biggest fans. But MOTM has a reputation for endless lead times and vaporware. When you start showing signs of life, the customers
Re: MOTM-730 was: [Panning VCA's was: [motm] OK...so what]
2010-04-30 by JH.
... Thank you! - It s an open secret that it s my own favorite of all I ve designed, too. :) JH.
Re: [motm] Re: ZO ver 730
2010-04-30 by Miguel Mendoza
OK, we are some people by now... Will this item be added to the Zen cart? Regards! Miguel. From: Jim Black Sent: Friday, April 30, 2010 1:51 AM To: MOTM List
Re: [motm] Re: ZO ver 730
2010-04-29 by Jim Black
Count me in. ... From: John Audette Subject: Re: [motm] Re: ZO ver 730 To: MOTM List Date: Wednesday, April
Re: MOTM-730 was: [Panning VCA's was: [motm] OK...so what]
2010-04-29 by nnovele
I must say that JH Interpolating Scanner is the best module ever. I use it in every patch and it bumps my creative thinking in a good way. Even the boring
Re: What 2 new modules should Paul build?
2010-04-29 by nnovele
+1 Transparent, colorless digital EQ with at least one band (switchable to HP) and vc frequency/gain - this is the tool nr.1 in my short list of wanted
Re: What 2 new modules should Paul build?
2010-04-29 by jneilnyc
Well, this just makes me sad for the fate of the MOTM450 Fixed Filter Bank. I know JH just made his boards available, but working up a module from a bare PCB
What 2 new modules should Paul build?
2010-04-29 by klstay
I lurk here almost exclusively, but I wracked my brain on this one. With all the other 5U stuff out there already the only thing I could come up with was a two
Taking Pre-Orders for my Fixed Filterbank PCBs now
2010-04-29 by JH.
Hi, thank you for your interest in my Filterbank PCBs! These will be available about mid/end of July 2010. (See
RE: [motm] ATTENTION MOTM-730 OWNERS:
2010-04-29 by John L Rice
Arg, sorry! Ya gotta log into Muff s site!
RE: [motm] ATTENTION MOTM-730 OWNERS:
2010-04-29 by John L Rice
And there is one experiment I did NOT do a video for. (SHOCKING, I KNOW! ;-) There is a thread for it on Muff s site called: A quick MOTM-730 VC Pulse Divider
Re: [motm] ATTENTION MOTM-730 OWNERS:
2010-04-29 by eric f
I ll give you a description of the one I m working on now. I have 4 voices coming out of the modular... Voice 1: /2 goes to MOTM-480 FM 1 (set to -1.5 so the
RE: [motm] Re: ZO ver 730
2010-04-29 by John L Rice
Wee Bee Ha-Pee To Testee! J I d even do a cool video showing the before and after! ;-) JLR From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf
Re: [motm] Re: ZO ver 730
2010-04-29 by Gordon Van Huizen
And I d order one and figure out where in the hell I d put it in my rig later. ;-) ...
Re: [motm] Re: ZO ver 730
2010-04-29 by John Audette
I m sure John and I would even beta-test for you. :) ... -- -=john
Re: [motm] 730 start synch
2010-04-29 by Miguel Mendoza
OK, I want (need) one, please. From: Paul Schreiber Sent: Thursday, April 29, 2010 4:02 AM To: Miguel Mendoza Subject: Re: [motm] 730 start synch Yes it would.
RE: [motm] Re: ZO ver 730
2010-04-29 by John L Rice
Me too!!!!!!!!!!!!!!!! JLR From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of John Audette Sent: Wednesday, April 28, 2010 8:00 PM To: MOTM
Re: [motm] Re: ZO ver 730
2010-04-29 by John Audette
If a simple chip change would give the 730 the ability to reset I would pay for that instantly. -=john ... -- -=john
Re: ZO ver 730
2010-04-29 by rogerpellegrini
Ok, in the interest of constructive brainstorming, here s another module idea. Polyphonic. * Module (1) quad digital VCO ala stripped down Cloud Generator
Robert Rich live clip(s)
2010-04-29 by Paul Schreiber
MOTM modular (with custom racked E340 Cloud Generator and E350 Morphing Terrarium), Korg digital and PVC flutes:
Re: [motm] Re: ZO ver 730
2010-04-28 by David Moylan
I don t yet have a 730 but am interested in one when economics allow. From a purely theoretical standpoint this sounds like very valuable set of changes to