MOTM

In a message dated 02/28/2000 4:53:32 PM, alt_mode@... writes:

<< However...where are you planning to put your power supply?   If you are 
planning to put it in the rear of your case, you will need to plan a bit 
carefully to have enough clearance for the power supply and the modules 
together.... I'm planning on 8.5" and I'll need to mount the PowerOne supply 
sideways on the bottom of the case to make sure it clears all the modules. >>

The power supply will bolt inside the 2.5" deep rear lid, so it will only 
protrude slightly into the module space.  I just don't want rears of modules 
poking out the back when I remove the rear lid.

Ivan