MOTM

Ivan,

I think Paul has been keeping the modules so they will always fit into those SKB 12
U cases that pop up so 8" should be plenty.  However...where are you planning to put
your power supply?   If you are planning to put it in the rear of your case, you
will need to plan a bit carefully to have enough clearance for the power supply and
the modules together.  Worst case, you would have to put multiple panels and EGs in
front of the power supply if the space is too tight.  I'm planning on 8.5" and I'll
need to mount the PowerOne supply sideways on the bottom of the case to make sure it
clears all the modules.

Eric

--- ivancu@... wrote:
> I'm ordering my cases and want to make sure that I'll be set for future 
> modules.  The  front/back depth of the case which modules can occupy is eight 
> inches.  Will this be enough for future modules such as the sequencer?
> 
> I am aware of the stability issue, but these will have lids on the back and 
> will sit tilted back on stands.
> 
> Ivan
> 
_________________________________________________________
Do You Yahoo!?
Get your free @... address at http://mail.yahoo.com