Re: Mk-II sequencer confusion
2004-10-04 by Júlio César
I have a Juno 106 too... mine is having that problem with poliphony too... I ve mailed a guy in australia that still have those chips, but they re very
Messages
Browse messages
Page 122 of 141 · 7050 messages matched
Re: Mk-II sequencer confusion
2004-10-04 by Alexander
I don t have a scanner, but i can type up anything you need out of the SH32 manual... there s not much that isnt obvious, other than the performance FX routing
Re: Mk-II sequencer confusion
2004-10-04 by Alexander
I think the voice chips on the Juno 6/60 were the same, but the 106 had different chips. maybe thats why the 106 s die so often ... sight is missing stuff
Re: [korgpolyex] Re: Mk-II sequencer confusion
2004-10-01 by x x
Yeah well go figure the sh32 I do need a manual for it to learn a few hidden tricks I think a manual for synths is good to get things going . I ahve to admit
Re: [korgpolyex] Re: Mk-II sequencer confusion
2004-10-01 by x x
Do you want owners manual for poly 800 mk 2 or schematics? I have schematics the whole set for poly 800 ver 1 and 2 the polyex sight is missing stuff from
Re: Mk-II sequencer confusion
2004-10-01 by Alexander
Don t feel embarassed about that... i totally missed the MASTER TUNE SLIDER on my DSS-1, how obvious is that one... as for the delay, it s just a digital delay
Re: DCO output mod
2004-10-01 by Alexander
It doesnt look like you could, there s 8 outputs from the DCO chip (as in the schematic) however they are labeled 2 4 8 16 1 and 2 the closest you could
Re: Mk-II sequencer confusion
2004-10-01 by khate
D oh! I ran to my Poly after reading your post ( it s that easy?! ), and Korg couldn t have made that more obvious... I m so used to not even looking at the
Re: Mk-II sequencer confusion
2004-09-30 by jisatsuboy
sorry. parameter 85. ... experience ... last ... seeing ... II
Re: Mk-II sequencer confusion
2004-09-30 by jisatsuboy
parameter #82 will switch the sequencer between one-time mode and repeat-mode. so if the value is 2, then it ll loop forever. i got into circuit bending after
Mk-II sequencer confusion
2004-09-29 by khate
I m hoping someone with a Mk-II specific manual (or more experience than I ve got) can help... According to the Mk-I manual I downloaded from the files
:: JOBA RECORDS :: Radio :: Noise Democracy :: 29/09/2004 ::
2004-09-29 by sintetik
... http://www.industrialdome.com:8000 ... trazendo clássicos e novidades vindas do underground da música eletrônica . Composto pelos DJs Residentes :
707 sounds
2004-09-29 by tab27@drexel.edu
Since someone asked, here s a 1 bar break played on the roland tr-707. http://bieniosek.com/707amen.mp3
DCO output mod
2004-09-28 by wagstoriches2000
Hello all! I just found a poly 800 on the side of the road and brought it back to my house. After firing it up, I was delighted to find that it worked. I
Re: arppegiating the poly, sequencing, etc.
2004-09-28 by Júlio César
Hi! About the MMT8...yes, they did a black newer version... I saw a black one when i bought mine, in the same shop, but i got the grey because the guy didn´t
Re: arppegiating the poly, sequencing, etc.
2004-09-25 by Doctor
I personally use Cubase VST 5.1. Lately for shits an giggles I have been syncinb my HR16b drum machine with the Poly. It sounds cool but It is hard to get the
Re: [korgpolyex] Re: arppegiating the poly, sequencing, etc.
2004-09-25 by x x
They didnt make a black sequencer did they .They made the black drum machine and the grey drum machine that looks like the sequencer almostexactly. the black
Re: arppegiating the poly, sequencing, etc.
2004-09-24 by Júlio César
There is a way to arpegiate using a MMT-8? I have one, that grey older type, bought it without the ac adaptor from a guy that thought it was a gadget to sync
Re: arppegiating the poly, sequencing, etc.
2004-09-24 by scott
I have an MMT8 that I got off of Ebay, and some advice if you re going to buy one: the buttons wear out. The buttons on the MMT8 are rubber buttons that have
Re: [korgpolyex] arppegiating the poly, sequencing, etc.
2004-09-24 by x x
Alsesis mmt8 is a great seq tool I use it still live and quick little pieces just because of its ease and quant rate it can be a successfully tool. also an
Re: arppegiating the poly, sequencing, etc.
2004-09-24 by Alexander
I ve been meaning to build that serial-MIDI jack for my Palm V been using MusicTracker (previously PalmTracker) and if i get all three tracks going it starts
Re: [korgpolyex] arppegiating the poly, sequencing, etc.
2004-09-23 by Tim B
Yep. Just search your favorite music retailer for arpeggiator - there are plenty of standalone hardware arpeggiators. I was just tracking an Oberheim
arppegiating the poly, sequencing, etc.
2004-09-23 by jisatsuboy
i m sure this is nothing new. but i ve been using the midi in/out to arrpegiate my poly -- the midi out sends the signal to the program which is set to
pitch bend/ sequencer mod???
2004-09-20 by ice_squirrel_440
does anybody here have knowledge of the schematics of the poly? wuld it be possible to rewire the sliding pots for bend level and sequencer speed to increase
Re: MoogSlayer Pot vales
2004-09-11 by Alexander
heheh the mod rules! though it eats batteries twice as fast with it on! Oh yeah, and if you can get a Korg DSS-1 cheap... and have room for another coffee
Re: [korgpolyex] Re: MoogSlayer Pot vales
2004-09-10 by x x
Buffy the moog slayer.....hehehehe. Alexander wrote: Just finished the mod, the resonace (the liear pot) is a bit touchy at the top
Re: MoogSlayer Pot vales
2004-08-31 by Alexander
Just finished the mod, the resonace (the liear pot) is a bit touchy at the top and does nearly nothing through most of it s range now. next time (or if i
MoogSlayer Pot vales
2004-08-31 by Alexander
using a linear taper 50k on the resonace won t make it useless will it? i know the taper has a lot to do with the way the range of the pot reacts to the turn
Re: [korgpolyex] Digest Number 426
2004-08-27 by sintetik
Kalcic, you´re a member of asome electro band ??? ... From: To: Sent: Friday, August 27, 2004 11:52
[korgpolyex] OT: showoff! :))
2004-08-27 by Joshua Kalcic
In my studio: MIXERS: MACKIE S.R 24/4 VLZ YAMAHA 01v AKAI midi mixer 3x FOSTEX DCM100 + mixtab GEMINI (for live electronic drums setup) BEHRINGER Eurorack 2642
Re: [korgpolyex] resonance on the moog slayer
2004-08-27 by Aaron Bader
... Hash: SHA1 DW8000 is sort of a bigger brother and (someone correct me if I m wrong, I don t have one) that it has a filter for each voice, plus two
Re: [korgpolyex] resonance on the moog slayer
2004-08-27 by Joshua Kalcic
Yes, I noticed (almost) the same thing, on the standard (100k) mod. I did the mod, and I hear a noticeble cutoff when I twist the knob, but I m not sure
Re: wanting help with filter mod
2004-08-27 by Alexander
Forget what it s worth! i play keyboards not trade them! the reverse keys just look BADASS :) ... http://www.synthmod.net/korg/moog_slayer/
resonance on the moog slayer
2004-08-25 by ice_squirrel_440
Hi everybody, i posted a while back about wether to do a standard filter mod or the MOOG SLAYER filter mod. in the end i decided fuck it and went with the moog
Re: [korgpolyex] Digi Key = Jerks / found cheaper lithium battery holders
2004-08-25 by russ daren
yes! Mouser is great! Great rack boxes! ... http://us.click.yahoo.com/Xkrq7C/IARHAA/n1hLAA/QnLolB/TM ...
Re: [korgpolyex] Digi Key = Jerks / found cheaper lithium battery holders
2004-08-25 by Aaron Bader
... Hash: SHA1 A good hobbiest-friendly electronics supplier is Mouser (www.mouser.com). Not as good of a web site, smaller part selection, but they ll send
Re: [korgpolyex] Digi Key = Jerks / found cheaper lithium battery holders
2004-08-25 by russ daren
Digikey is more geared towards corporate buyers, hence discounts for parts bought in multiples of a thousand! I actually have had very good experiences with
Digi Key = Jerks / found cheaper lithium battery holders
2004-08-24 by eric
I just had a bad expierence with Digi Key the makers of Battery Holders useful if your Poly s battery craps out. They wanted to charge me $.97 for the holder +
Re: [korgpolyex] Re: wanting help with filter mod
2004-08-23 by Tim Bieniosek
Yeah, it seems a reverse keys would be worth more unmodified? It s definitely worth not destroying, so be careful!
Re: wanting help with filter mod
2004-08-23 by Alexander
if you DO fuck it up royally i ll buy the reverse keys off ya ;) best of luck to you man! i m going to be doing this to mine soon *cross fingers*
Re: [korgpolyex] wanting help with filter mod
2004-08-23 by Marcus Wilson
if its a linear pot it wont matter best regards, Marcus
wanting help with filter mod
2004-08-23 by ice_squirrel_440
getting a korg poly 800 tomorrow... fell in love with it already and dying to do a filter mod. im just wondering if the moog slayer mod is going to rape the
Re: [korgpolyex] OT: Anyone here ever owned a Korg DSS-1?
2004-08-22 by Tim Bieniosek
... Yeah I own one - love that filter, and the waveform drawing is fun!
OT: Anyone here ever owned a Korg DSS-1?
2004-08-22 by lista@lulucamargo.com
I had one back in the 80 s. At the time it was a promising board, but then came the rompler workstations (M1, etc) and it was forgotten. Sampling is weak, but
OT: Anyone here ever owned a Korg DSS-1?
2004-08-22 by Alexander
Just wanted to know - i just scored one on ebay for $195 shipped!
Re: OT: korg dw8000 output distortion
2004-08-19 by Shayne Cafferata
ok, the sticker s just a sticker. i did a search and discovered that enermax makes computer power supplies... i haven t tried loading the factory sounds, but
Re: OT: korg dw8000 output distortion
2004-08-18 by Doctor
does the enermax sticker have a little star on it ? It s probably just a sticker from a computer power supply some joker put on there. I have one on my Cell
OT: korg dw8000 output distortion
2004-08-18 by Shayne Cafferata
a crippled dw8000 was recently passed on to me. at first i thought it was the key contact problem i read about, but further inspection revealed that within the
Re: Poly 800 Still Having Problems
2004-08-18 by kp8002000
Well id does make sounds, but won t except patches through the tape interface and the memory clears each time I power down.
Re: [korgpolyex] Poly 800 Still Having Problems
2004-08-17 by x x
The machine makes no sound at all correct.... kp8002000 wrote:As some of you may have read in my previous post, My Poly 800 has