Korg Poly800/EX800 Users

It doesnt look like you could, there's 8 outputs from the DCO chip (as
in the schematic) however they are labeled 2' 4' 8' 16' 1 and 2 

the closest you could probably get to individual outs is one output
for each pack of 4 DCO's :(

--- In korgpolyex@yahoogroups.com, "wagstoriches2000"
<wagstoriches2000@y...> wrote:
> Hello all!  I just found a poly 800 on the side of the road and 
> brought it back to my house.  After firing it up, I was delighted to 
> find that it worked.  I promptly did the filter mod and got to 
> thinking about other mods.  I have built 2 large modular synths and 
> have plenty of experience with analog circuits, but this little 
> bugger is a bit over my head.  Here's what I want to do. I would 
> like to locate a point in the circuit where I could insert switching 
> jacks that would tap into each of the poly 800's dcos separately.  
> That way I would have 8(?) jacks on the back of the unit, each one 
> corresponding to a voice.  I would want to get these jacks in BEFORE 
> the filter in the circuit.  I just want the raw DCOs so I can run 
> each dco into a separate filter in my modular.  Can this be done?  
> Any ideas?
> _rob Currier