Korg Poly800/EX800 Users

Do you want owners manual for poly 800 mk 2 or schematics?
I have schematics the whole set for poly 800 ver 1 and 2 the polyex sight is  missing stuff from vers one i need to post....I forgot i had mk2 in my collection.I am currently looking for juno 60 schematics.... Anyone happen to know where any are no big deal will locate soon just picked up mint condition one for 200 bucks works good now but i want to compare the parts to muy juno 106 and hoope that the pair will help keep one alive for at least the next 20 years......
Peace
Alienxxx
Also remeber these arent analog circuits these are chips that fry easy with mods so while possible with curtis chips etc in design toshiba chips etc old jap digi ics are not as flexible to inputs as they are outputs...


khate <khatedotorg@...> wrote:
D'oh! I ran to my Poly after reading your post ("it's that easy?!"), 
and Korg couldn't have made that more obvious... I'm so used to not 
even looking at the printed parameters since I've had her long enough 
that I can program sounds without having to reference it. Don't I 
feel silly... but many thanks for the tip!

I don't know if you're already on it, but there's a very useful Yahoo 
group for circuit-bending folks, called "benders". Very helpful 
people, and the files are a godsend. I was into bending before I 
discovered the moogslayer, but I'm in the same boat as you: I've 
bent/modded a dozen things now, but I'm still afraid of bungling up 
my high-in-sentimental-value Poly. 

Thanks again for your help, and I'll certainly pass on the manual if 
I find it. And yes, that delay IS mighty weird; it's probably the #1 
reason I'd like the manual as well... 

~Khate
www.khate.org

--- In korgpolyex@yahoogroups.com, "jisatsuboy" <pederseneric@h...> 
wrote:
> 
> sorry.  parameter 85.
> 
> --- In korgpolyex@yahoogroups.com, "jisatsuboy" <pederseneric@h...> 
> wrote:
> > parameter #82 will switch the sequencer between one-time mode and 
> > repeat-mode.  so if the value is 2, then it'll loop forever.
> > 
> > i got into circuit bending after getting my Poly.  I'm trying to 
> > build up the skill and confidence to do the moogslayer mod 
without 
> > fucking up my keyboard.
> > 
> > let me know if you find an MKII manual online.  I can't find it 
> > either.  I'm interested in what it has to say about the delay.  I 
> > think the delay is weird, and I don't know why.
> > 
> > eric
> > 
> > 
> > --- In korgpolyex@yahoogroups.com, "khate" <khatedotorg@h...> 
wrote:
> > > I'm hoping someone with a Mk-II specific manual (or more 
> experience 
> > > than I've got) can help...
> > > 
> > > According to the Mk-I manual I downloaded from the files 
section, 
> > the 
> > > sequencer will loop back to the beginning when it reaches the 
> last 
> > > note or rest entered. On my Mk-II, that's not the case; when it 
> > gets 
> > > to the last note, it just stops. Is that a difference between 
the 
> > > two, or is my Poly just being weird? Is there a way to make it 
> > loop, 
> > > some combination of buttons I'm missing? I swear I remember 
> seeing 
> > > something online about "loop enable" for the Poly800, but I 
could 
> > be 
> > > just going nuts from lead inhalation while circuit-bending.
> > > 
> > > Finally, if someone could just point me in the direction of a 
Mk-
> II 
> > > manual online (for free; Googling it brings up plenty for 
sale), 
> > > that'd be fantastic.
> > > 
> > > Thanks in advance for any help,
> > > Khate
> > > www.khate.org


Yahoo! Groups SponsorADVERTISEMENT


---------------------------------
Yahoo! Groups Links

   To visit your group on the web, go to:
http://groups.yahoo.com/group/korgpolyex/
  
   To unsubscribe from this group, send an email to:
korgpolyex-unsubscribe@yahoogroups.com
  
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


		
---------------------------------
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!