Eml synthesizers

I have never used an analog sequencer before bu I've already started to understand this. But I 
was wondering what the V1, V2, V3 and V4 were. I can't seem to understand the function of 
those and how they relate to the 401 either.

Also, there are two jacks at the bottom (one on each side) of the sequencer section with no 
markings at all. Does anyone know what those are for?

Thanks!

The V1,V2. etc are all voltage outputs from the slide bank.  Note the top
row has V1, Vclk. If the slide switch to the left of the row is put in one
of those positions, the voltage set with each slider in that row is
available at the same labeled jack output on the 400/401 synth section. Set
the sliders for each stage anywhere along their travel. Down is 0 volts and
full up is maximum, don't remember the value. As the sequencer clocks
through the sequence, the voltage set on the slider at that stage is active
on the jack. So, send that to the filter control, Oscillator CV, etc. and
they will follow whatever you have the sliders set to for that row. Kind of
a 16 step programmable sample and hold.

 

Yes, I have a manual. If you go to http://matrixsynth.blogspot.com
<http://matrixsynth.blogspot.com/>  and scroll down a bit, matrix just
posted a blog on my studio-the title is EML Poly-box samples.

 

I can tell you anything about the beast so, feel free to ask.

 

Have fun,

 

George Mattson

 

  _____  

From: emlsynth@yahoogroups.com [mailto:emlsynth@yahoogroups.com] On Behalf
Of ahfinnie11
Sent: Saturday, April 15, 2006 5:51 AM
To: emlsynth@yahoogroups.com
Subject: [emlsynth] Questions about the EML 400/401

 

I have never used an analog sequencer before bu I've already started to
understand this. But I 
was wondering what the V1, V2, V3 and V4 were. I can't seem to understand
the function of 
those and how they relate to the 401 either.

Also, there are two jacks at the bottom (one on each side) of the sequencer
section with no 
markings at all. Does anyone know what those are for?

Thanks!






  _____  

YAHOO! GROUPS LINKS 

 

*	 Visit your group "emlsynth <http://groups.yahoo.com/group/emlsynth>
" on the web.
  
*	 To unsubscribe from this group, send an email to:
 emlsynth-unsubscribe@yahoogroups.com
<mailto:emlsynth-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
  
*	 Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/>  Terms of Service. 

 

  _____