Re: SV: [Simmons Drums] SDS-7 - Number produced?
2016-06-30 by Nick Zampiello
I have a Production ## list for simmons by model. Originally from the AH list : I was wondering about SDS6 sequencers at the time. I have SDS6 # 102 i
Messages
Browse messages
Page 9 of 173 · 8603 messages matched
SV: [Simmons Drums] SDS-7 - Number produced?
2016-06-29 by Hans
Thank you Jesper If they did 3000 units I say they had a good run, if they were actually sold that is. Mine are 721xx. I thought I have one from the later
Re: [Simmons Drums] SDS-7 - Number produced?
2016-06-29 by jesper
Assuming that the 7 first in the serial is an indication of the model SDS-7. I dare to say that they also started at 1001 as was the practise of many
SDS-7 - Number produced?
2016-06-29 by hr.public@...
Is the number of SDS-7 chassis produced known to anyone here? Or how many voice modules for SDS-7 where made in total? Anyone care to speculate how many
Spurs
2016-05-28 by Kent
If anyone have an extra pair of spurs i would be willing to trade or buy it from you. This is for my SDSV pad. However, we all know the post production of
simmons sdx
2016-05-26 by Dimitrios Pavlidis
Greetings to all Greetings to all
SDSV backplane connector
2016-05-25 by tubmyk2@...
I m searching for the white card connector on the backplane that the modules connect to. This is for an extender I would like to build, so it doesn t have to
SDS7 – What is this mod about?
2016-05-19 by hr.public@...
Anyone know what the lifted resistor with the orange wire going to the hybrid module are doing? Vintage Simmons Drums SDS 7 CYMBAL Sound Card.
Re: Question about my hi-hat module...
2016-05-18 by Michael Buchner
On SDS5 they had only one 4k sample labelled cymbal. This is a small part of a cymbal wave without attack and decay portions and it was the first
Question about my hi-hat module...
2016-05-17 by tubmyk2@...
Something just occurred to me as I was looking at a picture of my hi-hat module... The EPROM that is installed in it says cymbal ... Is this standard on those
Re: [Simmons Drums] OT: rim for e-drum pads
2016-05-17 by Thomas Heckmann
Hi Jesper, thereÆs a shop here where I live and they have all kinds of rubber things for industry, windows, aso. and I bought something there for my Notron
OT: rim for e-drum pads
2016-05-17 by jesper
Hi list, this is not Simmons, but I thought that this might be the place to ask. I know there s at least one other Seabro owner here (Hi Thomas!). Anyway, my
Re: Fair price for SDS 5 pads
2016-05-16 by tubmyk2@...
Michael, Shot in the dark.. do you still have the bass drum pad? I know the post was 3 years ago so I m not hopeful! Mike
Looking for an original SDSV bass drum pad...
2016-05-16 by tubmyk2@...
I m looking for an original bass drum pad to match my set of SDSV riot-shield pads, if anyone has one they want to sell... color doesn t matter as much since
Re: [Simmons Drums] Simmons SDSV tom tom noise generator issue
2016-05-16 by tubmyk2@...
Michael, I partly wish I saw this before I went ahead and ordered up a couple of spare SSM2044 chips to have on hand, because you were 100% dead on about IC14,
2 EPBs (non working, great cosmetic condition)
2016-05-13 by music@...
I m selling my 2 non-functional EPBs that are both in excellent cosmetic condition... not exaggerating here, these look amazing.. practically new. I never got
Re: [Simmons Drums] Simmons SDSV tom tom noise generator issue
2016-05-13 by Michael Buchner
Do you hear any noise on the tom or nothing? If yes, change the IC 14 (1468), this is the noise CV summing amp. If no, check the noise amp IC 13 at pin 6,
Re: [Simmons Drums] Simmons SDSV tom tom noise generator issue
2016-05-13 by Nick Zampiello
it s probably whatever chip generates the noise. i ve had this happen before. NEW ALLIANCE EAST!!!! ... New Alliance East - Mastering New Alliance
SDS 7 - video
2016-05-10 by hr.public@...
Jesper might approve this abuse of a perfectly good drum module? Or not... :) Simmons SDS7 - Noise Machine https://www.youtube.com/watch?v=jA3bC4usxJc
Simmons SDSV tom tom noise generator issue
2016-05-09 by tubmyk2@...
Hello, first post in the group. Just got an early SDSV SN# 362 with 5 modules; Bass, Snare, 2 Tom Toms and a digital HH. The HH might have been added later?
Re: [Simmons Drums] SDS7 – Bus-b oard float mounting
2016-05-09 by hr.public@...
Sorry for the late reply. Got sidetracked by ordinary life. Really appreciate your offer to help out Simon. Problem with the original key seems to be that it
Re: [Simmons Drums] SDS7 – Bus-b oard float mounting
2016-05-03 by mr_adams_beard@...
Hans, Yes I ll make a CAD file for you. It s not a difficult shape. If it s flexibility you need they maybe nylon is a better material to print in. However
Re: [Simmons Drums] SDS7 – Bus-board float mou nting
2016-05-03 by Michael Buchner
You only need the small tongue inside the connector to keep the board in place, not the clamps around. I glue a small piece of plastic into the connector, some
Re: [Simmons Drums] SDS7 – Bus-b oard float mounting
2016-05-02 by Hans
Michael. how do you cut those plastic bits to hold the card in place? I thought I was the next MacGyver when I discovered I had some strips on my work bench
Re: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drum s] SDS7 – Bus-board float mounting
2016-05-02 by jesper
Exactly - the shafts are longer on the MTM. -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se ... Angaudlinn on
Re: SV: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float mounting
2016-05-01 by mr_adams_beard@...
Chris, the shaft can be made as long or as short as necessary. Provided the wall-thickness of the knob where it fits onto the shaft is 1mm thick or greater
Re: SV: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float mounting
2016-05-01 by Chris Cronin
This is great! The thing about the MTM knobs is the shaft which I believe is not consistent with any other Simmons knob. I don t have an MTX9 or SDS1000 but
Re: SV: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float mounting
2016-05-01 by mr_adams_beard@...
Mocked-up an MTM style knob from a picture of an MTX9/SDS-1000 one. Would definitely need to see one in person to get accurate dimensions though. Photo added
Re: SV: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float mounting
2016-04-30 by mr_adams_beard@...
Hi Chris, I don t see why not. Someone would have to send me a knob in the post to work from though as I don t own an MTM. I don t print the stuff myself
Re: SV: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float mounting
2016-04-30 by Chris Cronin
Hi, Is there any chance you could 3D print some MTM knobs? I know a few people here are after them. Cheers Chris From: mr_adams_beard@hotmail.com
Re: SV: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float mounting
2016-04-30 by mr_adams_beard@...
I have 3D printing experience of Simmons parts. I ve designed and printed an updated SDSV pad clamp and clips to replace broken parts on the SDS9 MK IV pads
Re: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float mounting
2016-04-29 by Michael Buchner
Professional parcels are always tied together with a kind of plastic band. This is perfect to cut these plugs. But also the plastic of kitchen cleaning bottles
SV: [Simmons Drums] Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float mounting
2016-04-29 by Hans
Great idea. Didn’t think of 3D printer. Not that I know anything about them and how to copy something like this to a format a 3D printer understand.
Re: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bu s-board float mounting
2016-04-29 by jesper
Those contact guides ought to be easy to replicate. Either with a sharp knife and some random plastic or via 3D-printer... -- electronically yours, jesper - --
Re: [Simmons Drums] SDS7 Voice Card databus question
2016-04-26 by jesper
Sometimes the pipes at yahoogroups clog and I need to manually sort it out. I found two stuck mails yesterday... /moderator Den 2016-04-26 kl. 11:26, skrev
[Simmons Drums] SDS7 Voice Card databus question
2016-04-26 by Hans
Not sure what happened with the 10 day delay of my mail. Anyway, I’ve been able to power up my SDS7 again and done some probing to answer my question in my
Re: [Simmons Drums] 3 Simmons corpses
2016-04-24 by ALFONSO PACHES
Glad to hear the old babies are working again. El Domingo 24 de abril de 2016 19:04, jesper jesper@electronic-obsession.se [Simmons_Drums]
Re: [Simmons Drums] 3 Simmons corpses
2016-04-24 by jesper
Both SDS-200 and SDS-8 are up and running again. :D Today I opened the SDS-1000 and was met be a sad eprom that someone has tried to forced out of the crcuit
Re: [Simmons Drums] SDS-8 presets and noise
2016-04-22 by philmurr@...
Be careful when reading the schematics. Although the SDS8 channels are laid out vertically on the PCB, there are certain IC s which are shared between
Re: [Simmons Drums] SDS-8 presets and noise
2016-04-21 by jesper
Update: Schematics in hand... :) Yes, the channels share the noise source and I bet that s bananas since it s located just below the preset switch board and
SDS-8 presets and noise
2016-04-21 by jesper
Hi list, I put the sold-as-broken-SDS-8 on the bench today, rigged it to a PSU and it lit up (to my surprise) as they re supposed to. Fiddling with the
Re: [Simmons Drums] 3 Simmons corpses
2016-04-21 by jesper
I could ve imagined... :D I ll take a look inside once I ve dealt with the SDS-8. That has a back plate that was badly bent. But now it s bent back and the
Re: [Simmons Drums] 3 Simmons corpses
2016-04-20 by Michael Buchner
Guess who has the SDS1000 Eprom image. And: the corrected one (without the click). And many alternative sounds for the SDS1000. I can send you :-) Best
3 Simmons corpses
2016-04-19 by jesper
Hi list, I just arrived back home with three units bought as a faulty lot. One SDS-200 that has one working channel and one dead. The good news is that all the
SV: [Simmons Drums] Re: [Simmons Drums] SDS7 – Bus-board float m ounting
2016-04-17 by Hans
I agree with that logic Jesper J Sadly on my 9 voice I have to reseat at least one voice, usually two or three after lifting the unit from the table. I’m
Re: [Simmons Drums] SDS7 – Bus-board float mounti ng
2016-04-17 by jesper
Hi, my 12-voice SDS-7 have never displayed any contact issues so I m thinking: why fixing something that ain t broken? But on the other hand, comparing to
SDS7 – Bus-board float mounting
2016-04-16 by hr.public@...
I’m wondering if I could have some input or even experience from users that have tried to float the bus-board on SDS7? Here is what I’m thinking. As we all
SDS7 Voice Card databus question
2016-04-16 by hr.public@...
Looking at Thierry’s amazing reverse engineering of the SDS7 voice board I’m wondering one thing. According to my understanding all CV’s to alter the
Re: SDS7 battery, schematic, theoretical functionality and some rambling
2016-04-16 by hr.public@...
Thanks Rich! As far as I can see 5k Alpha pots from Tayda will also fit. But with wrong shaft length and dimension. I also got a tip off list to visit Kessler
Re: SDS7 battery, schematic, theoretical functionality and some rambling
2016-04-15 by realmsteel@...
This is a part number from a post I put up in March 2014. The Digi Key PN for the pots I will be using is: 987-1572-ND Not sure if those will work on your