SDE Cartridges
2010-12-05 by darkideas@rocketmail.com
So I have started using my SDE again but have lost the memory cartridge, anybody got any they want to sell? Thanks D
Messages
Browse messages
Page 58 of 172 · 8595 messages matched
DIY Silicon Mallet Project
2010-12-05 by darkideas@rocketmail.com
Hi I ve just started druming again after taking nearly 10 years out and have fired up my SDE. Its noisy but I love the sounds it makes so I m going to get a
Absolutely Loving my SDS400
2010-12-04 by bobsvitilla
I have had my unit for just a short bit, but long enough to get it fully integrated into what I am trying to do. The way it responds to audio triggers is a
Betr: [Simmons Drums] OT: a swing at GC
2010-11-29 by Berk Aarts
hahaha, extremely funny Berk
OT: a swing at GC
2010-11-29 by jesper
For those among the Gods and other interested: Here s another guy who dislike GC: http://www.youtube.com/watch?v=HD_RyYb7ndM (see 3:49 in this quite enjoyable
The Complete Simmons Drum Book - Bob Henrit
2010-11-29 by toristratton
I hope I don t offend anyone with this post but I am looking for a digital version of this book. I would also buy a digital copy but I can t find one. I want
Re: [Simmons Drums] Sds drummer wanted
2010-11-28 by Roland Brenner
Good to see you posted the message on the FB Simmons page. These email groups are rapidly becomning obsolete !! For everyone else, Here s a link to the page,
Re: [Simmons Drums] Sds drummer wanted
2010-11-27 by monzarottie
Re: [Simmons Drums] Sds drummer wanted
2010-11-27 by jesper
... The country is used here as a replacement for the USA . Welcome to the list Dorian. Here are a few americans but I think the majority of us reside on
Sds drummer wanted
2010-11-27 by dorianshow
Wanted Anyone living in the new england area of the country Seeking drummer with an sds set(pref sds9) To play in band. Dorian
Not Just For New Wave ;-)
2010-11-23 by monzarottie
Here s a little nugget from Nine Inch Nails first live performance in 1989. Pretty rough sounding audio, but very cool none the less. Goto 11:48 in the clip.
Re: [Simmons Drums] SDS7 Patch Charts
2010-11-19 by jesper
OK, I guessed as much. Thanks Ed! -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] SDS7 Patch Charts
2010-11-18 by Ed
The copies are already spoken for. But, if you re okay with making copies, download the SDS7 patch charts.jpg file in the Files section of this site.
Re: [Simmons Drums] SDS7 Patch Charts
2010-11-18 by Ed
Xeroxes :(
Re: Betr: [Simmons Drums] fun stuff: It's still BAD!
2010-11-17 by jesper
You re onto something there! -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Betr: [Simmons Drums] fun stuff: It's still BAD!
2010-11-17 by Berk Aarts
it looks like some sort off workout/excersising/machine body pump etc. ... it
fun stuff: It's still BAD!
2010-11-17 by jesper
I know, I ve sent this before but I do find it soooo funny and now it showed up again: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180588567694 --
Re: [Simmons Drums] SDS7 Patch Charts
2010-11-17 by Kent McLain
Hello,I m interested in the patch sheets but i would be happy with about 5 of them, i can photo copy them from there. Thanks
Re: [Simmons Drums] SDS7 Patch Charts
2010-11-17 by jesper
... Just xeroxes? Or some Simmons original? I love original paperwork but hate photocopies. :) -- electronically yours, jesper - -- --- ---- ----- ---- --- --
SDS7 Patch Charts
2010-11-16 by Ed
Hey all. While doing a little cleaning I ran across 25 or so pages of blank SDS7 patch charts. They are the same as the patch chart found on page 30 of the
quick question about SDS200
2010-11-11 by philip karneef
Replaced the noise/osc balance knob on an SDS200. used a linear 100K pot. the problem arose first when oscillator s sound didnt come out, only noise. thought
Re: sds-7 pads - hardware?
2010-11-05 by Ed
You can use any 7/8 hardware.
Re: 100k pot with long stem a la PCB mount
2010-11-05 by Ed
Check out Digikey. Big selection and fair shipping prices. http://www.digikey.com/
100k pot with long stem a la PCB mount
2010-11-04 by stone.skeleton
Can anyone direct me to a suitable replacement panpot for my SDS200? i found lots of 100k pots but none seem able to be pcb mountable AND have a long enough
sds-7 pads - hardware?
2010-11-04 by toristratton
Just got a new set of pads without hardware. Do I have to use pearl tom arms or can I use other brands? Wondering before I start searching for drum hardware
Re: [Simmons Drums] Re: a maracas with your simmons set?
2010-10-30 by jesper
It s an acoustic maracas so yes, if you ve got muscles it does work. :) -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: [Simmons Drums] Re: a maracas with your simmons set?
2010-10-30 by jesper
They only describe it as having harsh and aggressive sound. I ran across it since I browse this swedish auction site each week... I seldom see Simmons gear but
Re: [Simmons Drums] Re: a maracas with your simmons set?
2010-10-29 by philip karneef
does this thing work? ... [Non-text portions of this message have been removed]
Re: a maracas with your simmons set?
2010-10-29 by Ed
That is awesome! How does it sound? I gotta get one. Nice find, Jesper.
a maracas with your simmons set?
2010-10-29 by jesper
http://www.tradera.com/MARACAS-TAMBORACCA-SEXKANT--auktion_301969_121272409 -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
balance pot on sds200/800 etc - VR16
2010-10-26 by philip karneef
looking for a replacement for this 100k pot (VR16), but needs to be longer than ones i ve seen at the electronics store - suggestions? thanks [Non-text
Re: OT - Call me an aging, bitter, whining old coot but...
2010-10-24 by Susie
I agree totally on the over-use of rare . Let me share the mystery of the rare RMI Electra-Piano. I see Jupiter 8s regularly on eBay and would in no way
Re: [Simmons Drums] OT - Call me an aging, bitter, whining old coot but...
2010-10-24 by jabathaslut
Add to that owned since new and smoke free environment ..First one is great when a 20yr old is selling a bit of gear that out dates him. The second, ok if
Re: [Simmons Drums] OT - Call me an aging, bitter, whining old coot but...
2010-10-24 by jesper
... true... ... true... ... Probably just one and it is a serial model and not rare at all. ... Digital classicv maybe... but not vintage just yet. ...
Re: [Simmons Drums] OT - Call me an aging, bitter, whining old coot but...
2010-10-24 by brian walker
HI you are not alone Rare Commodore 64 computer About as rare as the other 47 listed at the same time Rare Sequential Circuits P5 once owned by!!!! Is it a
OT - Call me an aging, bitter, whining old coot but...
2010-10-24 by jabathaslut
What gives with today s generation and the use of language. I was trawling through the usual gear selling sites today (ebay, craigslist etc) when it struck me
Re: Looking for a seller
2010-10-23 by jabathaslut
I m in Adelaide. If you know of the whereabouts of anything can you let me know? cheers
WTB: Simmons SDS-V
2010-10-23 by toristratton
I ve been trying to snag one on ebay for a while now and it s proving difficult, anyone have one up for sale with the basic modules in it? Thanks.
Re: Looking for a seller
2010-10-23 by ken evans
Where abouts in Australia are you? I live in Brisbane, sourced a set of SDS9 pads (red) with original stands (beaten up!) from Sydney for under about $300
Looking for a seller
2010-10-22 by jabathaslut
Hi guys. Over the years I have gathered a bit of a collection of Simmons units. I have an SDS7, SDS8,800,2 x SDS9 s a few SDS V modules (not a full kit as yet)
SV: [Simmons Drums] Dave Simmons interview from 'The Complete Electronic Percussion Book'
2010-10-15 by KW
thank you Ed. ... Från: Ed Ämne: [Simmons Drums] Dave Simmons interview from The Complete Electronic Percussion Book Till:
Dave Simmons interview from 'The Complete Electronic Percussion Book'
2010-10-14 by Ed
Just posted a Dave Simmons interview from The Complete Electronic Percussion Book by David Crombie in the Files area.
Betr: [Simmons Drums] joke: He don't know how correct he is!
2010-10-13 by Berk Aarts
Wowwie great man, really groovy
joke: He don't know how correct he is!
2010-10-13 by jesper
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180573833617 A good laugh this grey wednesday... -- electronically yours, jesper - -- --- ---- ----- ----
YO POT VALUE FOR SDS200 PAN KNOB
2010-10-07 by philip karneef
anyone know? sorry for caps just a bit frantic !!! and where can i get one with PCB mounts? common? mad noob here sorry! [Non-text portions of this message
WTB: SDSV/SDS8 pads
2010-10-05 by Ed
Hey all. Looking for SDSV/8 pads. Just need one large and one small pad. Condition is not important. Thanks in advance. Ed
Simmons SDSV Fully populated rack for sale!
2010-10-03 by Andy
Hi Guys, Just in case anyone is interested in owning a fully populated (the standard kits had two blanked off panels) Simmons SDSV electronic drum brain , I
Dave Stewart's SDS-V set on the tube
2010-10-02 by jesper
http://www.youtube.com/watch?v=vERQfc2nw6M Hard to see the heart shaped bass drum though. -- electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Betr: [Simmons Drums] SDS knobs
2010-09-30 by Berk Aarts
I think we got a winner??
Re: [Simmons Drums] SDS knobs
2010-09-30 by WT
Ah....cool ! WT ... From: Ed To: Sent: Thursday, September 30, 2010 6:37 PM Subject: Re: [Simmons Drums]