Mallet for sale in France
2011-09-19 by WT
http://www.leboncoin.fr/instruments_de_musique/231675509.htm?ca=1_s WT
Messages
Browse messages
Page 47 of 172 · 8595 messages matched
Re: [Simmons Drums] SDS7 eproms
2011-09-19 by WT
Cool, thanks ! Looks like I have some alternate sounds in mine then. Do you have BIN-files of those sounds ? WT ... From: Michael Buchner
Re: [Simmons Drums] SDS7 eproms
2011-09-19 by Michael Buchner
The initial sounds were: bass (8k), tight snare (8k), bright tom (16k), hihat (32k), crash cymbal(32k). Michael ... From: WT To: Simmons_Drums@yahoogroups.com
SDS7 eproms
2011-09-19 by WT
What sounds was the SDS7 initially shipped with ? My SDS7 has software version 9 installed. If anyone needs it, I have copied it in my eprom-programmer and can
Any interest in a SDS8 with 5 piece white kit?
2011-09-18 by philip karneef
no hardware, just sds8 and pads, all mint. shipping from montreal offers? [Non-text portions of this message have been removed]
Re: [Simmons Drums] Re: SDS7 repairs
2011-09-18 by WT
Yeah, I´ve seen this before in a couple of PPG Wave´s and a few other devices. There´s not a lot of to get in there and do such a mod. I think just
SDS9 Eprom
2011-09-18 by Roberto
Hi all, I ve just had an SDS9 as gift from my friend. It has some trobles, so I will repair it in the next days. One question: do you know where I can find
Re: SV: [Simmons Drums] SDS7 repairs
2011-09-18 by WT
Installed now is an RS 261-491 http://se.rs-online.com/web/cpd/0261491/?searchTerm=261-491 WT ... From: To: Simmons Drums
Re: [Simmons Drums] SDS7 repairs
2011-09-18 by WT
Thanks mate ! WT ... From: KW To: Sent: Saturday, September 17, 2011 7:26 AM Subject: SV: [Simmons
Re: SDS7 repairs
2011-09-18 by WT
Yep, rectifier is broken. Should I replace it with an identical or find one that can handle more current ? Any tips on a suitable one ? WT ... From: Michael
Re: SDS7 repairs
2011-09-18 by gordonjcp
... The diode bridge has failed, with one diode going short-circuit. This is surprisingly common - far more than failed capacitors which never go unless they
Percussion Magazine drum and percussion community
2011-09-18 by Percussion Magazine
Percussion magazine a digital download magazine for drum and hand percussion If you are a drummers please be part our community. We have a drum forum at:
Re: SV: [Simmons Drums] SDS7 repairs
2011-09-17 by Jacquot.Patrice@free.fr
you can send me a pic of it so I could look if I have one ? Tell me via private mail. good luck, Patrice. ... De: KW À: Simmons Drums Envoyé: Sat, 17 Sep
SV: [Simmons Drums] SDS7 repairs
2011-09-17 by KW
i m really sorry to hear this, hope help comes soon buddy! /k ________________________________ Från: WT Till:
SDS7 repairs
2011-09-16 by WT
So, my SDS7 died a few weeks ago. It has 12 modules and runs very hot. The rectifier for the +5V made a noise and the display flickered in and out. I´ve
Betr: [Simmons Drums] OT: Seabro in da houze!
2011-09-16 by Berk Aarts
wauwie, what a nice thing. What does it sound like?? greets Berk
SDS9 Schematic
2011-09-14 by mark.j.rose2@btinternet.com
Hi, i have a very very sick SDS9 in need of intensive care, either that or euthanasia might be the answer. Does anyone have a schematic that they would be
Re: [Simmons Drums] Re: OT: Seabro in da houze!
2011-09-14 by Jacquot.Patrice@free.fr
Seabro a cheap Simmons competitor so ... De: jesper À: Simmons Drums Envoyé: Wed, 14 Sep 2011 10:43:12 +0200 (CEST) Objet: Re: [Simmons Drums] Re: OT: Seabro
Re: [Simmons Drums] Re: OT: Seabro in da houze!
2011-09-14 by jesper
... Seabro obviously. :) ... The UK. ... Nope, looked quite off-the shelf standard stuff when I checked. Cannot recheck now. I injured my eye the day before
Re: [Simmons Drums] Re: OT: Seabro in da houze!
2011-09-13 by Jacquot.Patrice@free.fr
yes but who built that ? from what country ?? Any Curtis or SSM in it ? ... De: jesper À: Simmons Drums Envoyé: Tue, 13 Sep 2011 16:41:43 +0200 (CEST)
Re: [Simmons Drums] Re: OT: Seabro in da houze!
2011-09-13 by jesper
... It s quite basic. Like an SDS-8 or Tam-500. Good, but not amazing. The amazing part is the styling of the pads. :D -- electronically yours, jesper - -- ---
Re: OT: Seabro in da houze!
2011-09-13 by Willy van den Broucke
I didn t know that one ! How does it sounds ? [Non-text portions of this message have been removed]
Re: [Simmons Drums] OT: Seabro in da houze!
2011-09-12 by atmospherics4@gmail.com
Wow.........!!!!! Congrats! Sent via BlackBerry from T-Mobile ... From: jesper Sender: Simmons_Drums@yahoogroups.com Date:
Re: [Simmons Drums] OT: Seabro in da houze!
2011-09-12 by jesper
... Well, it s a bit scratched etc since the former owner gigged quite a lot with it. And I can understand why, it must be one of the easiest sets to put
Re: [Simmons Drums] OT: Seabro in da houze!
2011-09-12 by Jacquot.Patrice@free.fr
Museum Piece for sure ! Congratulations ! very SImmons brainy ! Where was it built ? ... De: jesper À: Simmons Drums Envoyé: Mon, 12 Sep 2011 12:37:54 +0200
OT: Seabro in da houze!
2011-09-12 by jesper
For those of us into some stylish 80 s design that s _not_ hexagonal: today this appeared on my doostep:
Serial numbers and repair recommendation
2011-09-06 by VinceL
I am finally getting around to taking my Simmons gear out of storage to start using it again. I haven t used some of this stuff for 15 years. I bought it all
Re: [Simmons Drums] serial numbers (now with compiled list)
2011-09-03 by jesper
... ...and lowest Simmons SDS-V on the list. :) -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Re: [Simmons Drums] serial numbers (now with compiled list)
2011-09-03 by Chris Cronin
I ve just checked and I have: SDSV - 300SDS7 - 2601 (highest so far?)SDS2000 - 553 I have an EPB as well but its not here. I ll check the serial later. ...
Re: [Simmons Drums] Re: number of units of each model?
2011-09-03 by jesper
... Well, cool to hear another one has survived. The serials on SDS-III, IV and Clap Trap (1) comes on a small black and silver sticker, usually found either
Re: number of units of each model?
2011-09-02 by statickaudio
i have an SDS3 but cannot see a serial number on it anywhere. i m not much help really am i.
RE: [Simmons Drums] serial numbers (now with compiled list)
2011-09-02 by Jenna
Ok, here are my numbers: Musicaid Claptrap Mk1 : 265SDS-V : 1805SDS-IV : (4)174 btw I could possibly see myself selling the SDS-IV (with wooden pads) if
serial numbers (now with compiled list)
2011-09-02 by jesper
Hi, here s the results of the Simmons owners inventory... with comments from yours truly. I decided not to go for a database but to include the highest and
Simmons MTM service manual
2011-08-27 by WT
Hi guys, I have a broken MTM and would like to fix it and then sell it. I´m looking for a more complete servicemanual then the PDF one that I have. It is all
Re: number of units
2011-08-25 by Michael Buchner
Forgot: SDS1000: M7898 [Non-text portions of this message have been removed]
Re: number of units
2011-08-25 by Michael Buchner
Here are mine: SDSV: 000708 SDS7: 70602 SDS7: 71820 SDS1: 11868 SDS9: 07090 EPB: 000880 MTX9: 00523 SDX: 466 (just kidding...:-) [Non-text portions of
number of units
2011-08-25 by alfpaches
Here are mines SDSV- 1088 SDS7- 70598, 71374 SDS9- 3928 MTX9- 1919 PORTAKIT- 197
Re: [Simmons Drums] number of units of each model?
2011-08-23 by Thomas Heckmann
Hey guys, here s my highest (or lowest numbers) ;-) And I did beat the highest number with my SDS III... Best Thomas SDS-III (has anyone seen numbers above
Re: number of units of each model?
2011-08-23 by superwolle70
SDS1: 11076 SDS3: 49 (already with decay killer) Musicaid SDS5: 34, 48, 78 Simmons SDS5: 581, 660, 1106, 1187, 1788, 2928 SDS7: 70479 SDS8: 80362, 82685 SDS9:
Re: [Simmons Drums] Re: number of units of each model?
2011-08-22 by chris puidokas
Here s Mine: SDSV: 003013 ________________________________ From: iantoau To: Simmons_Drums@yahoogroups.com Sent: Monday, August 22,
Re: number of units of each model?
2011-08-22 by iantoau
here is my inventory and serial numbers and no, none of them are for sale sds 400 1143 sds 800 1420 sds 8 587 sds 8 1380 sds 8 1474 hope this helps
Re: [Simmons Drums] number of units of each model?
2011-08-22 by brian walker
Hi All 70002 will be interesting to see how much it goes for!!! Mine is complete with pads, programmer and several hand wired modules, not sure if they were
Re: [Simmons Drums] (unknown)
2011-08-22 by jesper
... *haha* I think there are too many models to keep one running, so I ll stick with highest numbers as of now. Since Simmons never messed them up with letters
Re: [Simmons Drums] number of units of each model?
2011-08-22 by jesper
... Cool... let s see if anyone can outbid that one. ... Interested in 0002 currently on Ebay? ;) ... Please do, I ll check mine too. I think one of my
Re: [Simmons Drums] Re: number of units of each model?
2011-08-22 by jesper
... So, at least 4133 then. Good guessing this far. :) I ll compile a list of highest known numbers later... -- electronically yours, jesper - -- --- ----
(no subject)
2011-08-19 by Pete Daniels
well here are mine...good luck with this...however its not unusual for serial numbers not to start at 0 or 1.....! SDSV...6624 SDS9...208 SDS1000...4025
Re: number of units of each model?
2011-08-19 by ken evans
SDS8 serial number 84133
Re: [Simmons Drums] number of units of each model?
2011-08-18 by brian walker
Hi All SDS III serial number 111 only a little more than 100! SDS 7 Serial number 0001 I will check the numbers on the rest of the instruments over the
Re: [Simmons Drums] SDSV questions
2011-08-18 by atmospherics4@gmail.com
I m a bit slow about these matters.....never know when others are joking. Sent via BlackBerry from T-Mobile ... From: jesper
Re: [Simmons Drums] SDSV questions
2011-08-18 by jesper
... Certainly, the nipper comment was a joke! -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se