Re: [Simmons Drums] Good News/Bad News SDS8
2007-04-09 by jesper@electronic-obsession.se
Thanks Lasse, I only found 3066 and some weird TB 331 as mentioned stand-ins ... electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Messages
Browse messages
Page 119 of 172 · 8595 messages matched
Re: [Simmons Drums] Good News/Bad News SDS8
2007-04-09 by WT
3086´s can be replaced with 3046´s which are available.... WT - Just ordered a bunch for a Wavecomputer http://medlem.spray.se/waveterm/LJLab2006/ ... Från:
Re: [Simmons Drums] Good News/Bad News SDS8
2007-04-09 by jesper@electronic-obsession.se
Cool Ken - congrat s! I just resurrected the SDS-IV and when testing my other SDS-IV that one died. I guess all the 3086 s are dying at the same time... Good
Re: [Simmons Drums] Re: Bass Module Sd5
2007-04-06 by michael.buchner@debitel.net
Hi NYMO, I would recommend only the conversion of a tom module to an analogue HH. Short description: There are 2 different hihat modules (mostly not)
Re: Bass Module Sd5
2007-04-05 by NYMOs
Hi Michael, This begs the question....how does one change a tom module into a hihat/cymbal module ?? Cheers N Y M O
Re: [Simmons Drums] Good News/Bad News SDS8
2007-04-05 by ken_evans_99
THOOD THOOD THOOD BEEEEyooooo my SDS8 is back from repair and functioning perfectly, triggering from my SDS9 pads. A happy ending! Cheers, Ken. ... my ...
Bass Module SDS5
2007-04-04 by michael.buchner@debitel.net
The bass module is the same pcb like snare, tom and analogue hh/cym. The LFO is, like on toms, not fitted. The differences are: Int. R25 full open means noise
it's back alive (SDS-IV)
2007-04-04 by jesper@electronic-obsession.se
Hi list! It was one of the 3086 s that had given up. Good for me I had a few lying around since my last SDS-IV-fix. :) The SDS-IV is alive and kicking now,
RE : Re: [Simmons Drums] New SDSV owner says hi, Questions re Schematics/Bass module availablity
2007-04-04 by Yves BERNARD
Hi Julian, I have an SDSV and also the schematics. I can take a picture of the bass card. I don t know what are the componants that values change. Yves jesper
Re: [Simmons Drums] New SDSV owner says hi, Questions re Schematics/Bass module availablity
2007-04-03 by Robert
jesper, would you mind posting the link to the ultravox list here, please? i guess i would like to have a closer look ;o) thanx a bunch robert ... [Non-text
Betr: Re: Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-03 by Berk Aarts
okiedokie BERK! ... okiedoeki ________________________________________________________________________________________ 12move ADSL: Voordelig, snel en
Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-03 by jesper@electronic-obsession.se
Thanks for a short and good description! I ll start by changing the 1458 then, will buy a bunch today... It might have been imagination, but maybe there was
Re: Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-03 by jesper@electronic-obsession.se
www.simmons.synth.net *doh* ... electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se Order your own copy of the
Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-02 by michael.buchner@debitel.net
The SDS III has no tone generator. If you want to produce tone, you drive the (original moog...) filter into self oscillation by raising the resonance to a
Re: Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-02 by michael.buchner@debitel.net
Hi Berk, they are already online at simmons.synth.net, watch for service scoops under SDSIII / IV. Michael
Betr: Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-02 by Berk Aarts
can anyone get the schematics online like to see what you guys are talking about BERK! ... is ... of ... side ...
Re: Click!
2007-04-02 by superwolle70
Hi Andy, that sounds interesting. I have also already planned to realize something like a native simmons VST plugin. At this state it is only planned, that
Click!
2007-04-02 by andyc69uk
Hi All I have just downloaded the Simmonscollection.zip containing samples. Fantastic!!! Many thanks for making them available. I am trying to replicate my
Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-02 by jesper@electronic-obsession.se
Double checked the schematics... The 3086 s are drawn as full schematics and not standard IC s, that s why I missed them. Sure looks like the same setup. If
Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-02 by jesper@electronic-obsession.se
So there _are_ 3086 s... I didn t see those on the schematics. I ll gladly take a few pictures when I dig into it again. I bet it s the same then... But do you
Re: [Simmons Drums] SDS-III vs SDS-IV internally
2007-04-02 by michael.buchner@debitel.net
Hi Jesper, this is exactly the thing I want to know. The III is the four channel device, as far as I know and the IV the two channel device, but the IV is not
SDS-III vs SDS-IV internally
2007-04-02 by jesper@electronic-obsession.se
Hi List! I m looking inside my newly arrived SDS-IV due to a dead oscillator and I m comparing it to the schematics of SDS-III. Is it just me or aren t they
Re: [Simmons Drums] Good News/Bad News SDS8
2007-03-31 by jesper@electronic-obsession.se
We keep our fingers crossed for you... In the next few days I ll hear from former Ultravox live drummer if my alternative shipping idea from the UK will work.
Re: [Simmons Drums] Good News/Bad News SDS8
2007-03-31 by ken_evans_99
Heya - an update...and HI! to fellow Aussie Clae :-) My SDS8 has been repaired and is in transit from Melbourne back to Brisbane. Apparently several busted
Re: [Simmons Drums] Good News/Bad News SDS8
2007-03-30 by jesper@electronic-obsession.se
A friend has modifed his SDS-800 beyond imagination. He used all unused stuff in the ICs... electronically yours, jesper - -- --- ---- ----- ---- --- -- -
Re: [Simmons Drums] Re: OT Those Aussie 80's bands !
2007-03-30 by jesper@electronic-obsession.se
Downloading it is like running Simmons samples in Cubase! :) Listening to the vinyl is like hitting the hexapads themselves... ;) electronically yours, jesper
Re: [Simmons Drums] SDSV Vince Gutman Mods and Elby Designs MIDI-2-SDS
2007-03-30 by jesper@electronic-obsession.se
... I m modding an external box, cause the SDS-V wants +7 and not +5 which requires some modification. Otherwise I think it would work fine and there is room
SDSV Vince Gutman Mods and Elby Designs MIDI-2-SDS
2007-03-30 by julianzizko
Hi Group, I ve read on Sonicstate that there are lots of SDSVs around that have been modified by Vince Gutman, does anyone have information regarding these
Re: [Simmons Drums] Good News/Bad News SDS8
2007-03-29 by clae13
... Oh I see from a later reply that this info might come too late for Ken, but the answer is yes . The factory presets are set with trimmers next to each
Re: [Simmons Drums] Good News/Bad News SDS8
2007-03-29 by clae13
Hi Ken, Just a quick hello from a fellow Aussie. I m in Melbourne. Proud owner of an SDS-8 and a box of yet-to-be-racked V modules. I use the individual
Re: OT Those Aussie 80's bands !
2007-03-29 by clae13
... I ll second that! Real Life were up there with the best of the post-punk new romantic whatever IMHO. Berlin, Visage, Ultravox etc. Send Me An Angel by
Re: [Simmons Drums] New SDSV owner says hi, Questions re Schematics/Bass module availablity
2007-03-29 by jesper
Welcome! ... Sometimes they surface on Ebay. I ve sold loose modules myself a few times... ... Well, i don t think people like parting with them, but who
New SDSV owner says hi, Questions re Schematics/Bass module availablity
2007-03-29 by julianzizko
Hi Group, Thought I d let you know, I just scored an SDSV! I only paid £90!($180) out of a local classifieds website - Its completely trashed though, PSU has
Re: [Simmons Drums] Re: sds-7 bargain (?) on Ebay
2007-03-28 by jesper@electronic-obsession.se
*hehe* Promise! First I need to get it here... Parcelforce has increased their shipping quotes recently so maybe it ll lodge at my friend Peter s place in
Re: sds-7 bargain (?) on Ebay
2007-03-28 by superwolle70
Hi Jesper, whenever you have realized a nice sound: WRITE THE PARAMETERS DOWN ON A PIECE OF PAPER!!!!! The SDS7 is more forgetful than the oldest granny! ...
Betr: [Simmons Drums] sds-7 bargain (?) on Ebay
2007-03-28 by Berk Aarts
congratulations BERK! ... and ... ________________________________________________________________________________________ 12move ADSL: Voordelig, snel en
sds-7 bargain (?) on Ebay
2007-03-28 by jesper@electronic-obsession.se
*wooops* I accidentally bought an SDS-7 on Ebay UK yesterday. Eight cards and the selector pad with it. Circa 200 euros + shipping. I couldn t be happier and
Hi everyone
2007-03-27 by fmulassano
My name is Francesco from Turin (Italy) i have a MTM unit with his Pad (16 pad in one box). which is its actual appraisal? Sorry for bad english!
sds-v knob caps, last call!
2007-03-18 by jesper@electronic-obsession.se
Hi list! I ve promised one fellow list friend to order more knob caps so here s another call if you want to exchange all or just add caps to those knobs
Re: [Simmons Drums] SDS9 plus 5 piece kit for sale on E-bay item# 140095585645
2007-03-17 by Dale
The buy it now has dissapeared for some reason in the auction (I contacted e-bay) but it s still $350 with all the extras and free lower 48 shipping! ...
Re: [Simmons Drums] manual sillicon mallet
2007-03-16 by sovereigng@aol.com
Berk, What questions do you have? ************************************** AOL now offers free email to everyone. Find out more about what s free from AOL at
manual sillicon mallet
2007-03-15 by Berk Aarts
does anyone have a manual scanned for the sillicon mallet?? or can answer a few questions I have?? yours sincerely Berk
Re: damn, that hurt!
2007-03-15 by superwolle70
I can honestly relate to problems of that kind ... to look
Re: [Simmons Drums] Re: damn, that hurt!
2007-03-15 by jesper@electronic-obsession.se
Sure and it works like a charm but is quite worn and not as lovely to look upon. :) So, I m selling the old one once the new one arrives... electronically
Re: damn, that hurt!
2007-03-14 by superwolle70
not me, I gave up above 105 UKP (my wife and twins force me to ;-)), but didn t you already have one of these? ... looking
[Simmons Drums] Re: SDS-V knob caps for sale
2007-03-14 by superwolle70
This was #2 out of my 3 SDSVs ... with these perfectly round diamonds I showed you. And you wanted some UV Backlight under these, did you forget? But I have to
damn, that hurt!
2007-03-14 by jesper@electronic-obsession.se
Who was it - bidding against me?! ;) http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220088774399 If all goes according to plan I ll have an OK, but not
Re: [Simmons Drums] Re: SDS-V knob caps for sale
2007-03-14 by michael.buchner@debitel.net
Er Wolle, last time you told me to replace the knobs on your SDSV with these perfectly round diamonds I showed you. And you wanted some UV Backlight under
Re: [Simmons Drums] SDS9 plus 5 piece kit for sale on E-bay item# 140095585645
2007-03-14 by jesper@electronic-obsession.se
*sigh* I was worried there a while! ;) electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se Order your own copy of the
Re: [Simmons Drums] SDS9 plus 5 piece kit for sale on E-bay item# 140095585645
2007-03-14 by Dale
It was actually there when we moved in. And you can guess why the wife relegated all my music equipment to that room! ... new baby