The Kawai & Teisco Analog Synths Group

still seeking best solution to replace it.

As I said, get a same battery with the same speifications.
Actually it looks like it has been replaced before ?
I didn't have the battery held up like that with the plastic stripe 
on my SX-210.... but matbe that's the way they made it on the SX240


--- In kawai_sx210@yahoogroups.com, "texhand" <texhand@y...> wrote:
> 
> still seeking best solution to replace it.

--- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@y...> wrote:
Yes, the plastic banding looks original and has the japanese battery.
I did go by radio shack got a very similar (same specs) cell phone
recharageble battery with wire leads. It looks good enough to mount on
the board, but I will run wire leads to a safer mounting area. Once
this is accomplished on the sx 240 on to the sx 210 and will share the
results. 

> 
> As I said, get a same battery with the same speifications.
> Actually it looks like it has been replaced before ?
> I didn't have the battery held up like that with the plastic stripe 
> on my SX-210.... but matbe that's the way they made it on the SX240
> 
> 
> --- In kawai_sx210@yahoogroups.com, "texhand" <texhand@y...> wrote:
> > 
> > still seeking best solution to replace it.

place it as far as you can from any electronic circuits and 
components. And get a battery with at lease the same Ah value and 
exact voltage value. After replacing, let the synth work for at least 
a few hours.


--- In kawai_sx210@yahoogroups.com, "texhand" <texhand@y...> wrote:
> 
> --- In kawai_sx210@yahoogroups.com, "gil_we" <gil_we@y...> wrote:
> Yes, the plastic banding looks original and has the japanese 
battery.
> I did go by radio shack got a very similar (same specs) cell phone
> recharageble battery with wire leads. It looks good enough to mount 
on
> the board, but I will run wire leads to a safer mounting area. Once
> this is accomplished on the sx 240 on to the sx 210 and will share 
the
> results. 
> 
> 
> > 
> > As I said, get a same battery with the same speifications.
> > Actually it looks like it has been replaced before ?
> > I didn't have the battery held up like that with the plastic 
stripe 
> > on my SX-210.... but matbe that's the way they made it on the 
SX240
> > 
> > 
> > --- In kawai_sx210@yahoogroups.com, "texhand" <texhand@y...> 
wrote:
> > > 
> > > still seeking best solution to replace it.