Re: [Evolver] Evolver won't accept beta OS?
2003-10-03 by Robert Shanks
Hi Richard - 1 - Make sure you make the output buffers bigger in MidiOx - Ski sez try 1024/128 2 - Make sure you don t have something like active sensing
Messages
Browse messages
Page 110 of 144 · 7159 messages matched
Re: [Evolver] Difficult portamento
2003-10-02 by Richard
I think you need the polychain set to off - if you have it set on it will send the second note out as midi (I think) The evolver is the fastest monosynth I ve
Re: CLO destination
2003-10-01 by ski_ex5tech
It s done. :) Check the beta page on Dave s site for PIC version 1.8. Thanks to Sayer for the heads up! Ski www.ex5tech.com EX5Tech Evolver forum:
Re: [Evolver] Re: CLO destination
2003-09-30 by simon leclerc
Ok, thanks Ravi. A reset with shift would be great. on 30/09/03 6:07 PM, Ravi Ivan Sharma at noision1@hotmail.com wrote: I have already raised this issue with
[Evolver] Re: CLO destination
2003-09-30 by Ravi Ivan Sharma
I have already raised this issue with dave. I think he is working on a reset by pressing the reset button. I also passed on the idea to have the CLO at the end
Re: [Evolver] Re: CLO destination
2003-09-30 by simon leclerc
Ski, it s my turn to offer you my sincere apologies. I was tweaking the *Clock Divide* by a notch instead of the *BPM* knob. I just tried your trick with the
Re: [Evolver] Re: Evolver update from OS 1.0? !
2003-09-30 by Robert Shanks
Hi Ski - ... Yeah - that s the ticket! I ll just convince me lovely wife I need a second Evolver. p.s. Do ya have a spare bedroom if this doesn t go well?
Re: [Evolver] Re: Evolver update from OS 1.0? !
2003-09-30 by Robert Shanks
Hi Ski - Buy/give... either way is fine with me. The chip is about $15 in Digikey. I just want my Evo back. Robert
[Evolver] Re: Evolver update from OS 1.0? !
2003-09-30 by ski_ex5tech
I m thinking you need at least TWO Evolvers... one to mess with, and a spare or two to fall back on for times like these! ;) Seriously, I m sure that Dave
Re: CLO destination
2003-09-30 by ski_ex5tech
Sorry that didn t work for you, Simon. I ve done it several times with v1.6, and it works for me. I m not sure what we could be doing differently. If you
Re: [Evolver] Re: CLO destination
2003-09-30 by blip
... a different solution could also be to put CLO at the end of the mod destination list. bleep. out. ... http://leichenfeld.iuma.com
Re: [Evolver] Evolver won't accept beta OS?
2003-09-30 by Richard
quite right Robert it was a midi merge problem many thanks richard ... From: Robert Shanks To: Sent:
Re: [Evolver] Re: CLO destination
2003-09-30 by simon leclerc
I find it easiest to change the tempo back by tweaking the BPM setting by a notch and then back again. That does not work Ski. I tried it yesterday and just
[Evolver] Re: Evolver update from OS 1.0? !
2003-09-30 by ski_ex5tech
You know, I think you re right about Dave s policy on this. I missed it, but the v1.5 document changes, and now uses the words You would then need to contact
Re: CLO destination
2003-09-30 by ski_ex5tech
My sincere apologies, Simon, I misunderstood. Yes, you re right. If you set a sequencer destination to Clock Mod (even if just running over it ) while
Re: [Evolver] New OS
2003-09-30 by Joe
... Have an external sequencer (like the Machinedrum :-) do the transpose triggering for you. Or (my favorite trick) you can have the Evolver s LFO s do the
Re: [Evolver] Re: Evolver update from OS 1.0? !
2003-09-30 by Robert Shanks
... Yeap - that s right. How d I do boss? ... Dave sez he ll send you another one if you screw up. It says that in the pdf. The chip itself is not damaged,
Re: [Evolver] Re: CLO destination
2003-09-30 by simon leclerc
1.6 does not resolve what i m describing below. diS / CLO are now seperated, but if run over CLO it changes all clock settings and the only way to get it back
[Evolver] Re: Evolver update from OS 1.0? !
2003-09-30 by ski_ex5tech
Sooo... what you re saying is, If at first you don t fail miserably, try try and try again. Do we have that right?! ;) Seriously, I m sorry your PIC is
Re: Would a battery power modification be possible??
2003-09-30 by ski_ex5tech
I seriously doubt you d be able to cram anything inside the existing case. If you re really bent on doing this, look for a rechargable lithium ion battery
Re: CLO destination
2003-09-30 by ski_ex5tech
As already posted to the group and to EX5Tech, OS beta 1.6 solves this problem. Check the posts from the past couple days, or go download beta 1.6 for
Re: [Evolver] Re: Evolver update from OS 1.0? !
2003-09-30 by Robert Shanks
Hi Ski - ... Yeah - My mother used to tell me not to stick metal objects into the power outlets too, but I always did and it hasn t affected me a bit. (druel,
Re: [Evolver] Re: Evolver update from OS 1.0?
2003-09-30 by Ravi Ivan Sharma
I had this happen too. I had to go into midiox and jigger with it to slow down the midi transmission. buffers numbers etc. Finally it slowed it down and it
Evolver won't accept beta OS?
2003-09-29 by Richard
so I m sending the files from midiOX - the evolver does the count down and then goes to 99 and nothing works until I restart - no column lights, no nuthin...
New OS
2003-09-29 by trippler@t-online.de
Hello all, Just back from Ireland, where I spent some beautiful free days After some twiddling I finally managed to install OS 1.6. my Midex-8 didn t want to
Would a battery power modification be possible??
2003-09-29 by Collin
it s been a while since I ve taken part in this group.... I sold my Evolver early this year for a Nord Modular. The Nord Modular was a dissapointment after
CLO destination
2003-09-29 by Simon
Just a note: I think modulating the clock is great (diS is great too :)) but like i mentionned in OS 1.5, everytime you run over the CLO destination, your
Re: [Evolver] Re: Evolver update from OS 1.0?
2003-09-29 by Stefan Weber
Hi, I had exactly the same problems as Robert, and when the display after downloading read 99, the binary counting , which should last for about 10 seconds,
Re: get back to the 1.1 os
2003-09-29 by hysham2000
Thanks a lot for your helpfull informaions (i m gonna try now the beta 1.6) ... it ... mail ? ... to ... (and ... 1.5
[Evolver] Re: The New DSI Polyphonic Synth - programmer interface
2003-09-29 by ski_ex5tech
TOO MUCH INFORMATION!!! :D Ski www.ex5tech.com EX5Tech Evolver forum: http://www.ex5tech.com/ex5ubb_cgi/ultimatebb.cgi?ubb=forum&f=23 ... can t ... to get to
Re: Evolver update from OS 1.0?
2003-09-29 by ski_ex5tech
WOW! You powered down the Evolver during the upgrade and lived to tell?! ...when Dave s instructions specifically said, Thou shalt not remove the power
Re: [Evolver] The New DSI Polyphonic Synth
2003-09-29 by Joe
... Yeah, the MM kind of took everything over. Which is fine :-) But in order to get anything else, I ll have to get a new desk I think. Which is fine,
Re: [Evolver] Re: The New DSI Polyphonic Synth - programmer interface
2003-09-29 by Richard
I personally just hate using generic controllers - its one reason I can t stand softsynths. I like the feel of individual synths and I like to get to know them
Re: [Evolver] The New DSI Polyphonic Synth
2003-09-29 by Roonan
... To fit your MM not? ;-) Ronald.
Evolver update from OS 1.0?
2003-09-29 by Robert Shanks
Hi all - I seem to be having problems with updating the Evolver OS. I have OS 1.0 for the PIC and 1.0 for the DSP. Evolver #007. I m using MidiOx with the
[Evolver] Re: The New DSI Polyphonic Synth - programmer interface
2003-09-29 by Joe
... well, I don t have much money right now to get one either way. so I ll probably just wait for the reviews to come in and see how it fares. I would like to
Re: [Evolver] Re: The New DSI Polyphonic Synth - programmer interface
2003-09-29 by mr julian
From: Joe ... YES!!!!!! I mean it s all well and good to have a slider to wiggle and change a parameter, but compare the user interface
Re: [Evolver] Re: Evolver 4 Bank SD Adaptation
2003-09-29 by Trevor George
... Aha, that was the issue. Bank 4 is not in the 1.6 zip file. Luckily 1.5 is still on the server even though there isn t a link to it anymore/ //Trevor
Re: [Evolver] Re: Evolver 4 Bank SD Adaptation
2003-09-29 by simon leclerc
You are right, i was wrong. There is a file for bank4 in the 1.5 zip doc. on 28/09/03 10:16 PM, Joe at jmelnyk@cs.kent.edu wrote: ... what are you guys talking
Re: [Evolver] Re: Evolver 4 Bank SD Adaptation
2003-09-29 by Joe
... what are you guys talking about? I grabbed version 1.5 as a ZIP file which included the PIC and DSP file *and* the bank 4 file. in other words, bank 4 is
Re: [Evolver] Re: The New DSI Polyphonic Synth - programmer interface
2003-09-29 by Joe
... you have a very valid point. however, keep in mind that not everybody has a Drehbank. and since they cost as much as a new Evolver, I doubt that everyone
[Evolver] Re: The New DSI Polyphonic Synth - programmer interface
2003-09-29 by Jason Proctor
despite the proliferation of quality controller keyboards and knob boxes around, i m still old-fashioned and like the standalone instrument concept. i ve been
Re: [Evolver] The New DSI Polyphonic Synth
2003-09-29 by Joe
... I already do! Joe
Re: [Evolver] Re: Evolver 4 Bank SD Adaptation
2003-09-29 by simon leclerc
I updated to 1.5 when it was available and bank 4 was also empty. on 28/09/03 9:28 PM, Trevor George at trevor_nyc@yahoo.com wrote: I have an empty bank 4
RE: [Evolver] Re: Evolver 4 Bank SD Adaptation
2003-09-29 by Trevor George
I have an empty bank 4 also, so I m guessing that the bank of patches was in the 1.5 version and not 1.6. I didn t get around to updating until 1.6 was
RE: [Evolver] Re: Evolver 4 Bank SD Adaptation
2003-09-29 by Don Gothard
... No Problem, you know this is funny, I just got around to updating my Evolver today to the latest 1.6 beta and read that it had some of the evolutionaries
Re: Evolver 4 Bank SD Adaptation
2003-09-29 by ski_ex5tech
Thanks, Don! For anyone that doesn t already know, the Bank 4 that Don refers to is a quick best of collection thrown together by Dave for the new bank of
[Evolver] Re: The New DSI Polyphonic Synth - programmer interface
2003-09-28 by Riccardo Coen
... I don t get the point of the thread, there are hundreds of generic control surfaces out there.... what s the point of building a new one? I can control
Re: [Evolver] The New DSI Polyphonic Synth
2003-09-28 by Riccardo Coen
... Hopefully not! I d have to buy a new desk. /R
Evolver 4 Bank SD Adaptation
2003-09-28 by Don Gothard
I added the new bank 4 section from the new Beta 1.6 to the Evolver Sounddriver Adaptation. The new adaptation can be found in the files section.