Re: [ComputerVoltageSources] Re: CVS LCD Kits Available
2013-12-28 by microtonal
One more correction. These boards are the A00 version - NO PCB TRACE CUTS REQUIRED. I will still honor the discounted $15/20 prices for these. John
Messages
Browse messages
Page 1 of 19 · 922 messages matched
Re: [ComputerVoltageSources] Re: CVS LCD Kits Available
2013-12-28 by microtonal
Correction: US orders are $15.00 each and international orders $20.00 each. Clarification: These boards are for the LCD display only. You still need a CVS
Re: [ComputerVoltageSources] Re: CVS LCD Kits Available
2013-12-28 by microtonal
LCD kits are ready. Kits include bare pcb, programmed Atmel ATTiny2313, 4 x 2/56 x 1/4 black oxide screws and 4 x 2/56 washers. PCBs require cuts to two 50 mil
Re: [ComputerVoltageSources] Re: CVS LCD Kits Available
2013-11-28 by microtonal
There are some prototype LCD pcbs left that will require slight modification. Email me for details at jloffink@gmail.com. Sent from my iPad
Re: [ComputerVoltageSources] Re: CVS LCD Kits Available
2013-11-02 by eric
Is anyone planning on doing a build? I have a couple of PCB sets sitting around that I haven t gotten to and won t have time for in the next year or so, but
Re: [ComputerVoltageSources] Re: CVS LCD Kits Available
2013-11-02 by gino wong
two for me ... -- *Gino Wong Birgelo* BSComm, BSEE, ReRED Recording, *Analog Sound Design* *Audio Mastering, Recording & Restoration, Logistics*
Aw: [ComputerVoltageSources] RSF Kobol Set
2013-11-02 by Frank Hettlich
Sorry guys, thats happening when you simply hit reply - I am an idiot... Gesendet: Samstag, 02. November 2013 um 13:20 Uhr Von: Frank Hettlich
RSF Kobol Set
2013-11-02 by Frank Hettlich
Hi Dennis, I noticed your successful sale of a RSF Kobol Set. Did you actually get 12000 Euros? I am asking because I have the same set. I dont want to sell it
Re: [ComputerVoltageSources] Re: CVS LCD Kits Available
2013-11-02 by Dennis Verschoor
I am up for 3 lcd kits to. Maybe share the gerber files? I could have a few (10) made. ... -- Music at: http://www.mono-poly.nl
RE: CVS LCD Kits Available
2013-11-01 by <krelnarb@...>
Hello John, This would be an extremely long shot, but I thought I d ask anyway. After all these years, are there any LCD kits gathering dust in a corner? I d
Re: [ComputerVoltageSources] Re: Arduino ComputerVoltageSource
2013-05-26 by gino wong
I am sitting on 4 boards waiting for me get time. ... -- * * *Gino Wong Birgelo* BSComm, BSEE, ReRED Recording, *Analog Sound Design* *Audio Mastering,
Re: Arduino ComputerVoltageSource
2013-05-25 by djbrow54
That s a nice looking breakout board. The AtomPro still holds it s own for processing CVs. It has plenty of flash and ram although the RS-232 port should be
Re: [ComputerVoltageSources] Arduino ComputerVoltageSource
2013-05-24 by Eric Brombaugh
It would be sad if this group really is dead as this seems like a prime time for experimentation in Computer Voltage Sources. The Atom processor boards may not
Re: [ComputerVoltageSources] Arduino ComputerVoltageSource
2013-05-24 by eric
Me too! After an issue with a JH board that I couldn t solve, I ve been outsourcing more complex builds to Megaohm, but I let him choose from the menu of
RE: [ComputerVoltageSources] Arduino ComputerVoltageSource
2013-05-24 by Greg James
I m not dead yet! I ve actually got 2 PCBs and a semi-finished CVS on my shelf waiting for attention. Nice upgrade. Greg ... From:
Arduino ComputerVoltageSource
2013-05-24 by djbrow54
I know this group is dead but thought I would post here anyways. I played around with an Arduino Mega 2560 and replaced the AtomPro28 processor on a four
(no subject)
2012-07-10 by laxt57@aol.com
http://forum.call-tv.cba.pl/yuaoqlcns/425099.html
Re: PSIM for sale
2011-02-03 by djbrow54
I also used the PCF8591 which provides 4 additional 8 bit A/D converters. I put four of those along with two of the MCP23008 chips on a PCB as an input/output
RE: [ComputerVoltageSources] PSIM for sale
2011-02-03 by Andrew Scheidler
Hey Bob - Before you sell it, you might want to check out the MCP23008 chip. David (Brown) got me interested in these. They are an interface chip that the
PSIM for sale
2011-01-28 by r
I am considering selling my PSIM; email me w/ offers if interested: rdrake att data2action dott com. bbob
USB adapters
2010-10-10 by djbrow54
I ve read in the BasicMicro forums and have had emails from other users who have had trouble with USB to Serial adapters in programming the AtomPro processors.
Re: Studio 2.0.0.0
2010-10-10 by djbrow54
I know it requires XP or later (e.g. it will not run on Windows 98). Dave
Re: [ComputerVoltageSources] Re: Studio 2.0.0.0
2010-09-28 by John Mahoney
A lightweight loader, that s cool. I wonder if it ll run on a netbook or Pocket PC? Not that I own one of either, but it could be handy. John
Re: Studio 2.0.0.0
2010-09-27 by djbrow54
I just found out they have a lightweight loader. I can compile all my programs on my XP machine and move the .bin files to my Windows 98 machine for loading.
Re: Studio 2.0.0.0
2010-09-27 by djbrow54
I tried to update my IDE to Studio 2.0.0.0 on my Win98 computer. It loads but will not run. The error message simply states to update to a later version of
Trapezoid Generator
2010-09-26 by djbrow54
I was reading the Juergen Haible topic at the Electo-Music forum on the Trapezoid Generator. http://electro-music.com/forum/topic-43206.html&postorder=asc I
Re: [ComputerVoltageSources] Re: Studio 2.0.0.0
2010-09-24 by John Mahoney
Hooray for #include. I ve got a SpeakJet chip, too. Haven t installed it in the PSIM. Real Soon Now. Thanks for the info. Night, John
Re: Studio 2.0.0.0
2010-09-24 by djbrow54
I don t think the requirements for Studio are too much. I have it on an XP machine. I used to have IDE on a Win98 machine. I was planning on taking that to
Re: [ComputerVoltageSources] Studio 2.0.0.0
2010-09-24 by John Mahoney
Cool, Dave. The changes are minor, you say, but obviously worth using. My PSIM has been idling and I m itching to get it integrated into my current setup, so
Re: #include libraries
2010-09-23 by djbrow54
Studio 2.0.0.0 provides library support so I changed the file to support.djb.bas to eliminate any confusion. - Dave
#include libraries
2010-09-23 by djbrow54
#include now works in BasicMicro Studio 2.0.0.0. This allowed me to segment my large program template into a much smaller program template with two supporting
Studio 2.0.0.0
2010-09-23 by djbrow54
BasicMicro Studio 2.0.0.0 has been released. The hardware serial syntax changed just a bit. Somewhere between IDE and Studio enabling individual interrupts
Re: [ComputerVoltageSources] Drum Machine interface
2010-06-12 by eric f
I m another with the PCBs in the drawer. I was hoping that Scott D would do a panel. But the reality is that I am a slow slow builder and my backlog is
RE: [ComputerVoltageSources] Drum Machine interface
2010-06-12 by David Ingebretsen
Hi Dave, With great embarrassment, I ll admit I m one with a board in the drawer. I don t need anything, except to work down my list of modules to build. David
Drum Machine interface
2010-06-12 by djbrow54
I was reading about the Quad Thomas Henry Bass ++ drum voice module at http://www.birthofasynth.com/Thomas_Henry/Pages/Bass_Plus.html It made me think about
Re: Studio
2010-04-26 by djbrow54
There were some significant issues with Studio -24. The SHIFTOUT command would not function in fast mode so the DACs could never be programmed. These are
Studio
2010-04-16 by djbrow54
BasicMicro has been very responsive and I ve gotten a number of issues cleared up in the latest 10.0.0.24 beta release of Studio. They improved the I2C
IDE 8.0.1.7
2010-04-12 by djbrow54
I know IDE 8.0.1.7 is old news but it was the next upgrade from IDE 8.0.1.0. There were several significant changes made in the software that might require
Re: MTC to clock
2009-10-26 by djbrow54
I ve never done any Midi Time Code but I did write a short program to extract Midi clock and generate a quarter note clock, start pulse, and stop pulse. It s
Re: [ComputerVoltageSources] MTC to clock
2009-10-26 by Jason Proctor
... if you wanted a pulse on a separate port every frame/second/minute/etc, that should be straightforward. MIDI clock to analogue clock with multiple
MTC to clock
2009-10-26 by Dennis Verschoor
Hi Would it be possible to use the CVS to convert Midi Time Code to an analogue clock? And perhaps to midi clock to ? Cheers, Dennis -- Music at:
Re: Group Buy (or whatever)
2009-10-05 by janczmok
Hi, as already stated, i still have two PCB of the CVS8 for sale.
Re: Ribbon application
2009-09-26 by djbrow54
My ribbon application only took four channels. You could run two ribbons by using all 8 channels which the CVS has. You d just have to modify the program.
Re: Ribbon application
2009-09-25 by m0n075
Is it possible to connect 2 ribbons to one cvs board? Cheers, Dennis
Re: Follow up, panel offer -- RE: [ComputerVoltageSources] Dave Brown's CVS module group PCB buy?
2009-08-17 by djbrow54
... That recessed connector would be a pain. I avoided DIN or D-Subs to keep other cables and plugs from accidentally being connected since there is power on
Re: Follow up, panel offer -- RE: [ComputerVoltageSources] Dave Brown's CVS module group PCB buy?
2009-08-15 by julianfincham
... Assuming a threadded plug cant be found, may it be a good idea to swap the connector to somthing else - possibly even another D port? This ld be good for
Re: Follow up, panel offer -- RE: [ComputerVoltageSources] Dave Brown's CVS module group PCB buy?
2009-08-15 by djbrow54
Nice panel work. It looks like the panel is setup for the Ext I/O connector I chose which was a mini-Din. There isn t a lot of retention force to keep the
Re: Follow up, panel offer -- RE: [ComputerVoltageSources] Dave Brown's CVS module group PCB buy?
2009-08-13 by julianfincham
... As promised, ive just finished Tibor s panel, and uploaded a photo here - http://www.thebeast.co.uk/cnc/cvs.jpg Thank you, Julian
Re: [ComputerVoltageSources] Re: CVS LCD Kits Available
2009-08-12 by John Loffink
I still have LCD kits aplenty. John Loffink The Microtonal Synthesis Web Site http://www.microtonal-synthesis.com The Wavemakers Synthesizer Web Site
Re: Follow up, panel offer -- RE: [ComputerVoltageSources] Dave Brown's CVS module group PCB buy?
2009-08-12 by julianfincham
Hi Tibor, So as to save the rest of the group, ill mail you the specifics privatly, although when the panel is done, ill post up a picture (or a link to a