ComputerVoltageSources

>
> I resolved the ATtiny2313 programming issue and programmed a batch of 
> them, so the kits are now ready to ship again.  I have cut and pasted 
> the generic blurb below:
> 
> The LCD Support PCB/AVR kits are in stock. This new version A00 has the 
> Ground/Power connection fixed for the Lumex LCD, so no cutting or wire 
> swaps are necessary.  Price is $17.50 per kit USA/Canada, add $1.50 for 
> International shipping.  Payment should be made through PayPal using my 
> email address below.  Inquire for other payment methods.
> 
> The kit includes the hard to get black 2/56" screws, 2/56" washers, LCD 
> Support PCB and programmed ATTiny2313 microcontroller. For those who 
> haven't been following, the LCD Support kit provides an interface to a 
> 16x2 LCD for your CVS or PSIM, as well as a MIDI interface. Details 
> including pictures, demos, bill of materials and build instructions are 
> in the Yahoo groups CVS files section.
> 
> -- 
> John Loffink
> The Microtonal Synthesis Web Site
> http://www.microtonal-synthesis.com
> The Wavemakers Synthesizer Web Site
> http://www.wavemakers-synth.com
>

> John
>
> I know I may be late for these but do you still have these available and if so, do you have the displays as well.
>
> Regards
> Tibor
>
>   
>

> On Nov 2, 2013, at 11:22 AM, eric <ach_gott@...> wrote:
> 
> Is anyone planning on doing a build?  I have a couple of PCB sets sitting around that I haven't gotten to and won't have time for in the next year or so, but I still dream of having one in my synth.
> 
> cheers,
> eric
> 
> 
> On Saturday, November 2, 2013 9:04 AM, gino wong <ginowong@...> wrote:
> 
> 
> two for me
> 
> 
> On Sat, Nov 2, 2013 at 7:25 AM, Dennis Verschoor <modular@gmail.com> wrote:
>  
> I am up for 3 lcd kits to.
> Maybe share the gerber files?
> I could have a few (10) made.
> 
> 
> On Friday, November 1, 2013, wrote:
>  
> Hello John,
> 
> This would be an extremely long shot, but I thought I'd ask anyway.
> 
> After all these years, are there any LCD kits gathering dust in a corner? I'd like to purchase one if there are.
> 
> Cheers,
> 
> 
> ---In computervoltagesources@yahoogroups.com, <jloffink@...> wrote:
> 
> I still have LCD kits aplenty.
> 
> John Loffink
> The Microtonal Synthesis Web Site
> http://www.microtonal-synthesis.com
> The Wavemakers Synthesizer Web Site
> http://www.wavemakers-synth.com
> 
> 
> 
> austbondlover wrote:
> > John
> >
> > I know I may be late for these but do you still have these available and if so, do you have the displays as well.
> >
> > Regards
> > Tibor
> >
> > 
> >
> 
> 
> -- 
> Music at: http://www.mono-poly.nl
> 
> 
> 
> -- 
> 
> Gino Wong Birgelo
> BSComm, BSEE,
> ReRED Recording, Analog Sound Design
> Audio Mastering, Recording & Restoration, Logistics
> 
> Ginowong@...
> 
> 
> 
> 
> 
> 
>

> On Nov 27, 2013, at 11:53 PM, microtonal <microtonalsynthesis@...> wrote:
> 
> There are some prototype LCD pcbs left that will require slight modification. Email me for details at jloffink@gmail.com.
> 
> Sent from my iPad
> 
>

> On Dec 27, 2013, at 8:07 PM, microtonal <microtonalsynthesis@...> wrote:
> 
> LCD kits are ready. Kits include bare pcb, programmed Atmel ATTiny2313, 4 x 2/56 x 1/4 black oxide screws and 4 x 2/56 washers. PCBs require cuts to two 50 mil power ground traces to swap the traces. Details are in a file in group files section.
> 
> Cost is $17.50 US and $22.50 International. Send queries to my email at jloffink@... before paying as there are a limited number available. Please don't post queries to the list as I rarely check this email anymore.
> 
> John 
> 
>> On Nov 27, 2013, at 11:53 PM, microtonal <microtonalsynthesis@...> wrote:
>> 
>>  
>> There are some prototype LCD pcbs left that will require slight modification. Email me for details at jloffink@...m.
>> 
>> Sent from my iPad
> 
>

> On Dec 27, 2013, at 9:28 PM, microtonal <microtonalsynthesis@...> wrote:
> 
> Correction: US orders are $15.00 each and international orders $20.00 each.
> 
> Clarification: These boards are for the LCD display only. You still need a CVS board to drive this one.
> 
> John
> 
>> On Dec 27, 2013, at 8:07 PM, microtonal <microtonalsynthesis@...> wrote:
>> 
>>  
>> LCD kits are ready. Kits include bare pcb, programmed Atmel ATTiny2313, 4 x 2/56 x 1/4 black oxide screws and 4 x 2/56 washers. PCBs require cuts to two 50 mil power ground traces to swap the traces. Details are in a file in group files section.
>> 
>> Cost is $17.50 US and $22.50 International. Send queries to my email at jloffink@... before paying as there are a limited number available. Please don't post queries to the list as I rarely check this email anymore.
>> 
>> John 
>> 
>>> On Nov 27, 2013, at 11:53 PM, microtonal <microtonalsynthesis@...> wrote:
>>> 
>>>  
>>> There are some prototype LCD pcbs left that will require slight modification. Email me for details at jloffink@....
>>> 
>>> Sent from my iPad
> 
>