Re: AN200 Expert editor
2013-02-13 by tom649731
Is that version 1.22?
Messages
Browse messages
Page 16 of 268 · 13386 messages matched
LFO
2013-02-12 by Clinton@gmail
The manual for the AN1X doesn t state that the LFO isn t tempo sync able. I can t find it anywhere either, is this possible? If not has anyone come up with a
Re: [AN1x] AN1x freezes on initial screen during bootup
2013-02-11 by achtung_999
This is an extremely easy repair to do. No need for a repair shop, really no need at all. All you need to know is how to use a screwdriver. This thread shows
Re: [AN1x] AN1x freezes on initial screen during bootup
2013-02-11 by Philip Sharp
Thank you, J.F. I am not a DIYer, sadly. I will try to find a repair place here in San Diego. :) Thanks again! Cheers, Phil ... From: Jeff
Re: AN200 Expert editor
2013-02-11 by jonengel
Hello all! I am a new owner of a PLG150-AN and new member of the group. I was having the same issue with the AN Expert Editor, downloaded from the Support
Re: [AN1x] AN1x freezes on initial screen during bootup
2013-02-11 by Jeff
... I guess it s a backup battery issue : change it. When it hangs up in the boot process hit the - key and normally it would start. I ve had a similar
AN1x freezes on initial screen during bootup
2013-02-11 by pilafdm
So, my lovely AN1x has begun to hang at the Yamaha 1997 (or whatever the first screen says) during the bootup process. One person suggested it was because I
Scenes have separate effects?
2013-02-10 by baron_apocalypse.t21@btinternet.com
Hello all, recent happy owner of the AN1X and have a question. I was using it multitimbral which I worked out ok however, in the manual it says each scene can
Re: [AN1x] Philip Glass's Birthday
2013-02-04 by spaceanimals
Hey: I used the 5th mode of the harmonic scale ( I know I said 4th) Phrygian Dominant, C Db E F G Ab Bb C, used tempo delay set to 3/16, used a osc sync patch
Re: [AN1x] Philip Glass's Birthday
2013-02-03 by Jeff
... Nice idea Jimmy ! Cheers. J.F.
Re: [AN1x] Philip Glass's Birthday
2013-02-03 by Christopher Keep
What a good idea, Jimmy. Could you maybe give us a few more hints to help achieve this effect? Like what would a chord in the 4th mode of the harmonic minor
Philip Glass's Birthday
2013-02-03 by spaceanimals
As Philip Glass just turned 76 a couple days ago, I thought it would be appropriate to create some instant Philip Glass music on the AN1X. Take a nice wide
New to the Group
2013-02-02 by jonengel
Hello all, I just won a PLG-150AN on ebay and couldn t be more excited about it. Looking forward to learning all I can and contributing what I can, glad to be
Re: [AN1x] (unknown)
2013-01-27 by Chris Gregory
I bought an old MDD G4, the last model that still boots into OS 9, to run legacy applications like Unisyn and the AN1X editor. Cost almost nothing, does the
Re: [AN1x] Re: AN1X Editor for Mac OSX
2013-01-27 by jammie
yes there is theres a java version by a member derek ... From: Alvaro To: AN1x-list@yahoogroups.com Sent: Sunday, January 27, 2013 3:27 PM Subject: [AN1x] Re:
Re: AN1X Editor for Mac OSX
2013-01-27 by Alvaro
Hi I have the same issue. WE DONT HAVE A SOUND EDITOR FOR THE AN1X FOR MAC.
(no subject)
2013-01-27 by Alvaro Rodriguez
Hello Im new. I unconditionally love my An1X and played it for years since it just came out. Any of you guys can give me a link or any software i can use
[AN1x] Re: an1x via midi with acid pro 7
2013-01-17 by tom649731
When I had basic questions I was young and I had parents to answer them. I guess not everyone on the internet is old enough for some independent research.
Re: [AN1x] Re: an1x via midi with acid pro 7
2013-01-15 by Clinton@gmail
Wow Tom just said don t ask basic questions. I m glad I didn t know anyone like that when I had basic questions. Jav, feel free to ask me as many basic
Re: an1x via midi with acid pro 7
2013-01-15 by tom649731
... - If you want to record midi or sequence the AN1X from Acid, you ll need a Midi interface. - For hearing audio through your PC and recording: connect the
an1x via midi with acid pro 7
2013-01-14 by Javier C
hi everybody, how can i use the sounds of the Anx1 with acid pro 7 sequencer?
Re: [AN1x] Re: Basic question about PARTS / Multitimbrality
2013-01-11 by Clinton@gmail
On the subject of the motif rack, anyone know if the jog wheel is replaceable? Easily? Perhaps modular? Sent from my iPhone ... [Non-text portions of this
Re: Basic question about PARTS / Multitimbrality
2013-01-10 by Bill H
The article on the ES Rack was on SoundOnSound, not SonicState: http://www.soundonsound.com/sos/may05/articles/yamahamotifes.htm and it depends on
Re: Basic question about PARTS / Multitimbrality
2013-01-10 by Bill H
Wait a minute: the Motifator site only has promotional flyer downloads. If you need the manual, I ll find a link or post it to our FILES section. Bill
Re: Basic question about PARTS / Multitimbrality
2013-01-10 by Bill H
Hi dan! Here s the ES Rack description on Yamaha: http://usa.yamaha.com/products/music-production/tone-generators/motif-rack_es/?mode=model And here s the ES
[AN1x] Re: Aftertouch issue (and greetings)
2013-01-10 by yp_artist_guy
Thanks Ed. I still might have to to a teardown to the keyboard contacts level...It s not bad but one C key has a slightly higher velo sensitivity than the
RE: [AN1x] Re: Aftertouch issue (and greetings)
2013-01-08 by Ed Edwards
Rc, Glad to see you went as far as possible with the overhaul/cleanup. Takes a lotta guts for many musicians to do the maintenance on their machines. I
Re: Aftertouch issue (and greetings)
2013-01-07 by yp_artist_guy
... Thanks for the suggestion. That s a nice looking controller. Got my courage up, finally did battery and other surgery on the thing, just got done. Pulled
Re: Aftertouch issue (and greetings)
2013-01-03 by KurtF
There is a sort of more modern equivalent in the Novation X-Station with its XY pad. While it may not have all the sound capabilities of the AN1X, it does have
RE: [AN1x] Aftertouch issue (and greetings)
2013-01-03 by Ed Edwards
Unfortunately, there are no hardware adjustments for the ribbon. The aftertouch does have a variable resistor (trim pot) which may be adjusted. It is the
Re: [AN1x] Aftertouch issue (and greetings)
2013-01-03 by yp_artist_guy
Thanks J.F. I ll be careful working on it. Ebay seller didn t represent it well, so have an issue there (scratches, and a cracked corner not mentioned, not due
Re: [AN1x] Aftertouch issue (and greetings)
2013-01-01 by Jeff
Happy new year to you all, AN1x fans ! Hi yp ! I guess you can fix your troubles with ribbon control and after touch, as these are tweakable , both in each
Aftertouch issue (and greetings)
2012-12-30 by yp_artist_guy
Hi. Newbie to AN1x here (as to owning, but have been checking them out for 2 years via YouTube and forums, etc) Got an AN1x off of ebay and have been giving it
Re: Basic question about PARTS / Multitimbrality
2012-12-26 by dan
Hey Bill, very interesting question that i promote for my topic! Can you tell me more about The Motif ES Rack that can attract An1x/AN200 players? Has it
Re: [AN1x] Re: Basic question about PARTS / Multitimbrality
2012-12-25 by Jeff
Merry Xmas Bill and you all AN1x guys ! @+ J.F.
Re: Basic question about PARTS / Multitimbrality
2012-12-24 by Bill H
Thanks, guys, for the great discussion. It gets my imagination going. It s not exactly on topic, but I ll mention that I ve often thought of installing 2
Re: Basic question about PARTS / Multitimbrality
2012-12-11 by dan
Thanks Jeff and Bill, very useful informations. I think with Ableton and max for live the mod matrix can be extended to what we want, giving to the AN1X an
Re: Basic question about PARTS / Multitimbrality
2012-12-10 by twobeelandscape
Hi Dan, the answer is yes, yes and yes. Start by looking at the AN1X User manual in the Files Section of this Group. Pages 19-23 describe Scenes, which is how
Re: [AN1x] Basic question about PARTS / Multitimbrality
2012-12-10 by Jeff
Hi Dan ! welcome to the club ... ... That s true : either 10 notes on single patches or 5 + 5. Unfortunately there is no dynamic allocation of the polyphony
Basic question about PARTS / Multitimbrality
2012-12-10 by dan
Hi, i m interested in buying this fantastic synth, and i read that AN1x got 2 parts with 5 + 5 notes. I would like to know if: - i can use 2 completely
Re: AN1XEditor won't install
2012-11-13 by seattlesynthguy
I also had the same problem with Win7 Sp1 X64. I had copied the install executable from a CD, and saw what you saw. It was there running as a process but not
Re: AN1X Editor for Mac OSX
2012-11-13 by don clarke
Hi all Thanks for responses and comments. Yes Ctrlr—which is indeed a host for user-made, computer-based, MIDI controller modules for specific synths—does
Re: AN1X Editor for Mac OSX
2012-11-12 by derek192603
Hello. Whilst not an editor (yet), an.factory works on OSX. Check out www.xfactory-librarians.co.uk. I have some work to do to make sy.factory fully functional
Re: [AN1x] AN1X Editor for Mac OSX
2012-11-11 by Jeff
Hi jammie ! and others .. Could you tell me a bit more about ctrlr ? As far as i know it s some kind of universal editor ... Cheers. J.F.
Re: [AN1x] AN1X Editor for Mac OSX
2012-11-11 by jammie
theres a java one by a member of the group that should work with osx its a paying product and the only own available there is a ctrlr model for the an1x dont
AN1X Editor for Mac OSX
2012-11-10 by Don
Hello to the group! Waiting for my AN1X to arrive in the post :) Just wondering if anyone has made available yet an AN1X editor for Mac OSX without having to
Re: [AN1x] AN1X EDITOR FOR WINDOWS XP
2012-11-10 by massimo rossi
The original editor run on my windows xp... ________________________________ Da: emmanuel.geoffroy A: AN1x-list@yahoogroups.com
Re: AN1X EDITOR FOR WINDOWS XP
2012-11-10 by KurtF
Oh, and the editor works in XP, not just 95/NT. It also works perfectly in Windows 7 x64, too.
Re: AN1X EDITOR FOR WINDOWS XP
2012-11-10 by KurtF
If you mean the original Yamaha issue editor, Yamahasynth.com has it in their Support section under Downloads. Just select Keyboards, Synthesizers, and AN1x in
Re: AN1X EDITOR FOR WINDOWS XP
2012-11-10 by mynameisrodan
I just put it in compatibility mode and used the 95/NT version. http://usa.yamaha.com/products/music-production/synthesizers/an1x/?mode=model