Re: CS80 legs?
2008-11-28 by Heath Finnie
This is the stand I use for the CS-80. No issues with it at all. Proline PL-700Z. Rated at 375 lbs.
Messages
Browse messages
Page 56 of 95 · 4739 messages matched
Re: [yamahacs80] Re: CS80 legs?
2008-11-27 by T.M. Bois
Hmm... it seems like the only one I can find locally is the WS-550 (replacement for WS-540?) and it s only rated for 250lbs. With the CS80 weighing in at
Re: [yamahacs80] CS-80 Oscillator not turning off in panel mode (or memory settings)
2008-11-27 by rj krohn
my best guesses are A)a multiplexer chip that is responsible for reading those switches, or B) an opamp that powers one of those chips. i recently had this
CS-80 Oscillator not turning off in panel mode (or memory settings)
2008-11-27 by Heath Finnie
I mentioned that one of the problems that has me stumped on the CS-80 I m working on is that in channel one s panel mode the oscillators will not turn off.
Re: Wanted: Rear switch for selecting high or low output.
2008-11-27 by Heath Finnie
... Thanks for the tip David. I was using the headphone output and after I posted this I got brave and just rebuilt the switch since I had all the pieces.
Re: CS80 legs?
2008-11-27 by zaum
I bought that Quiklok stand when I was just about to get an 80 and then didn t :-(. They certainly aren t bad and there are few if any other kbd stands out
CS-50 set of legs wanted
2008-11-27 by David
Wanted to buy -original set of legs for CS-50 thanks David
New CS-50 Owner here-hello
2008-11-27 by David
Hi Im a new CS-50 owner --my previous Yamaha was a CS-70M Any tips you can give me to maintain CS-50 for long life cheers David
Re: [yamahacs80] Wanted: Rear switch for selecting high or low output.
2008-11-27 by David Rogoff
... I recently worked on a CS80 that had a bad level switch. I looked all over but could not find a matching slide switch. I ended up mounting a dpdt toggle
Re: [yamahacs80] From soft to hard
2008-11-26 by Max Fazio
Hi slippery,nice to have you there! I m interested about the soundtrack and what are you actually producing with the Big Combo! M ... From: slipperysoles To:
From soft to hard
2008-11-26 by slipperysoles
Here is the story: I never cared about Vangelis, in a way (and forgive us for being arrogant when we were young) he was uncool like Jarre was uncool. While
Re: Source for Yamaha CS80 Sliders?
2008-11-26 by Anders Eriksson
Thanks M! Going to check this out, I ve finally got almost all slide caps from www.synthparts.com /Anders ... which has the zero-free option and its also z
Re: [yamahacs80] Presets staying the same when selecting?
2008-11-26 by Max Fazio
Try the TS board , maybe there is the selecor (iG00157) on the first channel in need to be changed... M ... From: Heath Finnie To: yamahacs80@yahoogroups.com
CS-80 and Brian Eno
2008-11-26 by Heath Finnie
I was reading in some of the newer posts people saying that it was Before and After Science and Cluster and Eno that made them want a CS-80. I thought this was
Presets staying the same when selecting?
2008-11-26 by Heath Finnie
On my CS-80 I noticed that some of the presets are not switching properly. For instance, Brass 1 and Flute are the same. I once had a similar problem with the
Re: Doing some repair work on CS-80 1459
2008-11-26 by Heath Finnie
Thanks for that tip. Don t know why I didn t think of that as I ve done that in a P5 before. After swapping them and the problem stayed I decided to crank up
Re: [yamahacs80] CS80 legs?
2008-11-26 by rj krohn
im a lucky stock legs owner. the key to the height is a bar stool. it sits PERFECT. i also find i have better posture at the cs80 on a bar stool, than i do at
Re: [yamahacs80] CS80 legs?
2008-11-26 by T.M. Bois
thanks, stephen. that s a solid tip--discrete and a with a relatively small footprint. and cheap too--never a bad thing. i do like the look and build of
Re: [yamahacs80] CS80 legs?
2008-11-25 by David Rogoff
... I found a set of original legs on eBay, but it took me almost a year. Besides looking great, the original legs have a great feature: since they bolt to the
Re: [yamahacs80] CS80 legs?
2008-11-25 by Stephen Jones
These are amazing, look great and hold plenty of weight. http://www.quiklok.com/catalog/?p=productsMore&iProduct=30&sName=WS-540
Re: [yamahacs80] Re: Source for Yamaha CS80 Sliders?
2008-11-25 by Max Fazio
Hi I can post an alternative: an italian handcrafter does a ribbon which has the zero-free option and its also z (aftertouch) sensitive; you can contact the
Re: Source for Yamaha CS80 Sliders?
2008-11-25 by blchrr@homecall.co.uk
Damn that thing is just nuts lol! .
Re: Source for Yamaha CS80 Sliders?
2008-11-25 by Anders Eriksson
The RM2 controller works just like a standard pitch bend with zero in middle unfortunately, not like the original CS80 slider. /Anders ... controller he is
Re: [yamahacs80] Doing some repair work on CS-80 1459
2008-11-25 by rj krohn
2. Voice 3 on Channel 2 is outputting only noise instead of a saw/square. Sine is working well. when i had this problem, it was a bad VCO chip(153?). sine and
Re: [SPAM] [yamahacs80] Source for Yamaha CS80 Sliders?
2008-11-25 by Wavecomputer360
I would say that any upmarket Electone organ of about the same era has the same type of sliders. They can be had for next to nothing, and who knows, they might
Re: [yamahacs80] Source for Yamaha CS80 Sliders?
2008-11-25 by Max Fazio
NIce one, Matrix! But, could the R2M do the zero free job as on the original? M ... From: matrix To: yamahacs80@yahoogroups.com Sent: Tuesday, November 25,
RE: [SPAM] [yamahacs80] Source for Yamaha CS80 Sliders?
2008-11-25 by Scott Metzger
Damn. That is awesome. I wonder if he can make CS80 Top covers. I never had one, and I always wanted one for my CS80. Very cool controller. To:
Re: [SPAM] [yamahacs80] Source for Yamaha CS80 Sliders?
2008-11-25 by Laurie Curry
Amazing.... I would love one once I get the VRack... ... From: Anders Eriksson aliaswavefront@comhem.se Date: Mon, 24 Nov 2008 17:44:43 -0700 To:
Doing some repair work on CS-80 1459
2008-11-25 by Heath Finnie
Well after being fired up for the first time in many years there is a problem or two. (it actually had a few, but they seem to be sorting themselves...) 1.
Re: [SPAM] [yamahacs80] Source for Yamaha CS80 Sliders?
2008-11-25 by Anders Eriksson
... controller he ... where to ... him. You can ... controller.html ... tell ... Hi David and everyone on this group, I ts me Anders (not Andrew..) who
Re: [SPAM] [yamahacs80] Source for Yamaha CS80 Sliders?
2008-11-24 by matrix
I ll ask him. :) ... -- cheers, matrix http://matrixsynth.blogspot.com [Non-text portions of this message have been removed]
Re: [SPAM] [yamahacs80] Source for Yamaha CS80 Sliders?
2008-11-24 by David Rogoff
... OMG! This is amazing! Please get him to join our Yahoo group and tell us more about it. David
Source for Yamaha CS80 Sliders?
2008-11-24 by matrix
A fellow named Andrew sent me some picks of a custom CS80 controller he is building. He s looking for CS80 style sliders. If anyone knows where to find them,
CS80 legs?
2008-11-24 by bucklehorse
Hi all, Realize this is a long shot, but thought I d ask if anyone here has a spare set of legs they d be willing to part with, or who might otherwise be
Re: [yamahacs80] I finally got one! + tech help?
2008-11-22 by Wavecomputer360
Stephen, if you re reading, owning one of these and not playing it out of fear of breaking it is a crime against synthesizers ;) Even though I don t
Re: I finally got one! + tech help?
2008-11-22 by Quazimodo
Tell your tech to look for a broken wire on the TKC board first. I have just recently been trying to fault find on the TKC when all of sudden extra symtoms
Re: [yamahacs80] I finally got one! + tech help?
2008-11-21 by rj krohn
i would say about 50% of the time i walk away from it, my first thought is that s the best electronic instrument ever built . wait til its fully calibrated
Re: [yamahacs80] I finally got one! + tech help?
2008-11-21 by Max Fazio
I can understand you, T.M. , I played it once, I can t forget that time for the rest of my life... Vangelis Beaubourg and Cluster and Eno were the reasons
Re: [yamahacs80] Real? NAMM! - Re: A new Poly aftertouch controller??!?!?!!
2008-11-21 by Kent Friedman
Even more amazing would be if the Studio Electronics Code/Omega with CS80 filters would respond to polyphonic aftertouch. To get a full set of 8 dual-channel
Real? NAMM! - Re: A new Poly aftertouch controller??!?!?!!
2008-11-21 by David Rogoff
The Infinite Response website (http://www.infiniteresponse.com/) says they ll have several versions of the VAX77 keyboard at NAMM. Someone from IR or Arturia
Re: [yamahacs80] I finally got one! + tech help?
2008-11-21 by T.M. Bois
Sounds like there can be some dead VCAs in the TRG1 ( initial brilliance and level VCAs for Channel I ) board... Thanks for the tip, Max. This sounds
Re: [yamahacs80] I finally got one! + tech help?
2008-11-21 by Wavecomputer360
Congratulations on your purchase, Ted. Seems a dream came true for you. I hope it won´t turn into a nightmare, though. All that recent talk about dead CS80s
Re: [yamahacs80] I finally got one! + tech help?
2008-11-21 by Max Fazio
Hi Sounds like there can be some dead VCAs in the TRG1 ( initial brilliance and level VCAs for Channel I ) board. I would look also to the TWS generator
Re: [yamahacs80] I finally got one! + tech help?
2008-11-20 by David Rogoff
... Sounds like you re talking about an issue with TSB2 board (or the key contacts). Study this:
Re: I finally got one! + tech help?
2008-11-20 by Quazimodo
... more obvious thing to look into. Good luck - that s where I am with mine at the moment.. and I am slowly going bald..! ... Be careful.. I think that s
Re: [yamahacs80] I finally got one! + tech help?
2008-11-20 by T.M. Bois
Thanks, RJ! I ll give this a shot when i get home. To specify further, the problem only seems to crop up in a noticeable way on VCO 1 and with obviously
Re: [yamahacs80] I finally got one! + tech help?
2008-11-20 by rj krohn
if you can get voice 8(and we really need to be talking about a particular VCO, cause im sure its either VCO 1 or 2, not both)to sound on ANY preset, i doubt
Re: [yamahacs80] Re: CS-80 Fixes
2008-11-20 by JH.
... http://d.yimg.com/kq/groups/13287191/or/1278022767 That s my guess also. JH.
I finally got one! + tech help?
2008-11-20 by T.M. Bois
Dear Synth Cognescenti, Well, 10 years after I first fell in love with side 2 of Brian Eno s Before and After Science , and one year after my buddy
Re: CS-80 Fixes
2008-11-20 by David Rogoff
... him. ... Bad VCO chip? Looks like IC5 on the SUB board: http://d.yimg.com/kq/groups/13287191/or/1278022767 Easy to check with a scope (if you bought a