Re: [yamahacs80] Blade Runner Im looking for these versions
2008-12-21 by Max Fazio
Hi.Are you looking for the original material or burned cdrs? Cause I own Gongo but never paid for it, it was a present that a friend of mine made me back in
Messages
Browse messages
Page 55 of 95 · 4739 messages matched
Re:Blade Runner Im looking for these versions
2008-12-21 by zaum
Well I don t know your goal, are you just trying to hear the music or are you collecting bootlegs and the official releases? I guess showing the deficiencies
Blade Runner Im looking for these versions
2008-12-21 by David
Hi Im looking to buy all versions below apart from 1994 release which I own Please email me off list CS-50 owner David 1994 Atlantic Vangelis Blade Runner -
GS-1 resources
2008-12-19 by Max Fazio
Hi This is loosely related here except for the fact that it is a Yamaha, it s heavy , has a similar KAS and has poly aftertouch....and Scott Rider has one ;-)
Question about Kenton retrofit
2008-12-19 by David
Hi does this work ok--Im considering a purchase thanks David
Re: Hi from Italy!
2008-12-18 by oberheim64
Hi. Finally I can continue my restoration. It was a IGO151 VCA that distort the waveforms! Thanks erikfromhere. Now I was the last problem on waveform Pulse,in
Re: complete user manual cs80
2008-12-16 by Alessandro
... the ... SUPER!! thanks a lot ;)
Re: complete user manual cs80
2008-12-15 by David Rogoff
... It s on my website (stolen from some other website): http://therogoffs.com/cs80. The presets are in the second file:
complete user manual cs80
2008-12-15 by Alessandro
hi, i m looking for the complete user manual of the cs80. Everything on the web i found only limits to 14 pages or so. I want to have the panel settings for
Re: [yamahacs80] CS-80 Fraud
2008-12-15 by Wavecomputer360
If you know where they live, bring some of your friends of the local Hell´s Angels Charter with you and pay them a visit for a party :-). If not, ignore and
CS-80 Fraud
2008-12-15 by slipperysoles
http://farmington.craigslist.org/msg/944004856.html http://london.craigslist.co.uk/msg/947522927.html Have any of guys ever come across these adds? Obviously
Re: [yamahacs80] Re: M-Board output level- typo in adjustment procedure?
2008-12-14 by will.gregory@gmx.de
Hi Kent, I just stumbled across this because I do not get a proper sine wave on the IC5 pin 13 Tremolo/Chorus section with the M-boards providing a plain sine
Re: M-Board output level- typo in adjustment procedure?
2008-12-14 by kent_spong
Hi Gregor, I would imagine that most people would not go too mad on this value really. I would worry more about initial vca trims on Trig 1 and 2 boards and
M-Board output level- typo in adjustment procedure?
2008-12-14 by willgregori
Dear CS-80 friends, while tuning my CS-80 according to Yamaha´s adjustment procedure I wonder about the VCA #4 gain value (step 4 on page 15). This VCA sets
Re: [yamahacs80] Help understand TECHNICALLY Sustain II
2008-12-04 by Laurie Curry
This Could be.... you cant pitch bend a released note in Sust I....maybe pitch control is off.... ... From: Max Fazio faxiomas@virgilio.it Date: Thu, 04 Dec
Re: [yamahacs80] Help understand TECHNICALLY Sustain II
2008-12-04 by Laurie Curry
I think it is the Concept of the Sustain pedal...... The Sustain pedal is not a Hold pedal Sustain or the pedal sustain switches on a circuit which extends
Re: [yamahacs80] Help understand TECHNICALLY Sustain II
2008-12-04 by Max Fazio
Hmm, I also found the corresponding patent US patent 4,179,968, author Hideo Suzuki.... I ll have a read at it M ... From: Wavecomputer360 To:
Re: [yamahacs80] Help understand TECHNICALLY Sustain II
2008-12-04 by Max Fazio
Huh, do you think so? Look, there is a SH board after the KAS which provides the pitch voltage to the voices, was it there by a casuality? Sustain II acts like
Re: [yamahacs80] Leaving CS powered up for long periods
2008-12-04 by Wavecomputer360
The problem is that, when you keep it powered up for an extended period of time, the preset selector lights will melt the translucent plastic caps (String 1
Re: [yamahacs80] Help understand TECHNICALLY Sustain II
2008-12-04 by Wavecomputer360
I think Max should be awarded the Ask the Impossible Prize 2008 :-). I bet even the CS80´s designers didn´t think about this... it was just a design which
Leaving CS powered up for long periods
2008-12-04 by David
Is it safer to leave CS powered up for say 8 hours a day even though it may only be used for 30mins -60mins a day? This is to avoid switching on and off and
Help understand TECHNICALLY Sustain II
2008-12-04 by Max Fazio
But I m not getting how it works in a technical way: I mean, the NANDs before the sample and hold module should output all the gates at the same time because
Re: [yamahacs80] Help understand Sustain II
2008-12-04 by Laurie Curry
Yes ... exactly... The Sus 1 is where the pitch will only follow while keys are physically held down.... ... From: Wavecomputer360 wavecomputer360@gmx.de
Re: [yamahacs80] Help understand Sustain II
2008-12-04 by Laurie Curry
that is exactly what I said... ... From: Max Fazio faxiomas@virgilio.it Date: Wed, 03 Dec 2008 17:21:03 -0700 To: yamahacs80@yahoogroups.com Subject: Re:
Re: [yamahacs80] Help understand Sustain II
2008-12-04 by Max Fazio
Yes, Stephen, it does so but it s more deep: I call this effect the clockwise swirl in Australia , that is reverses a steal the oldest into steal the
Re: [yamahacs80] Help understand Sustain II
2008-12-04 by Max Fazio
Thx Laurie, a great man! M ... From: Laurie Curry To: yamahacs80@yahoogroups.com Sent: Wednesday, December 03, 2008 3:16 PM Subject: Re: [yamahacs80] Help
Re: [yamahacs80] Help understand Sustain II
2008-12-03 by Wavecomputer360
If I remember correctly, Sustain 2 is the mode where you can use the pitch ribbon to bend the note even when you´re keeping it sustained using the footpedal.
Re: [yamahacs80] Help understand Sustain II
2008-12-03 by Laurie Curry
In sustain I , the order that you release notes alters the rotation of oscillators... A new note will take the oscillator that has been available
Help understand Sustain II
2008-12-03 by Max Fazio
Hi all I ask your kind help in explaining the difference between Sustain I and II. A first question: what is the method of stealing the notes with CS80 in
Re: stumped - no variation of pitch!!!
2008-12-01 by kent_spong
OK. What you really need to do here then is isolate this fault. First thing i need to know is if you have replaced any of the 4558 (4158) in the synth. Next
Re: stumped - no variation of pitch!!!
2008-12-01 by kent_spong
Your problem is on the BA board by the sounds of it. Pull the TU and see if the wire has 13ish volt sitting on it. ... I said, I know the KAS ... problem
Re: stumped - no variation of pitch!!!
2008-11-30 by Heath Finnie
Hi David, All three fuses are good and all my supply voltages are there. As I said, I know the KAS board is good because I replaced the entire board after this
Re: [yamahacs80] stumped - no variation of pitch!!!
2008-11-30 by David Rogoff
I ve had CS80s do this when I ve shorted something and blown one of the DC fuses in the power supply. Are you sure all the supply voltages are there?
stumped - no variation of pitch!!!
2008-11-30 by Heath Finnie
This is a big question here. The CS-80 I m working on will barely change pitch all the way up the keyboard now. Some keys will play a little lower but not
Re: [yamahacs80] Re: Very high voltages on the KAS and SH boards on CS-80
2008-11-29 by rj krohn
what s the biggest value cap in the PSU? i dont remember. 1000mfd/35v? when i did mine, im 99% sure i bought all caps at mouser. i just bought 10,000mfd/25v at
Re: Very high voltages on the KAS and SH boards on CS-80
2008-11-29 by Heath Finnie
For instance, on reference voltage I m supposed to be getting 4.0 volts, I m getting 13.46 volts!!!
Very high voltages on the KAS and SH boards on CS-80
2008-11-29 by Heath Finnie
I m now getting very high picthes on most keys across the keyboard on every preset and channel. I noticed in checking the votages on these two boards (KAS and
source for power supply caps?
2008-11-29 by Heath Finnie
I looked on mouser and such and I m not finding the big power supply caps for the CS-80. Am I just being stupid in my searching? (rhetorical...) Thanks, Heath
Re: [yamahacs80] Re: good effects/reverb for a CS-60
2008-11-29 by THM
Oops sorry you re right the SDE-330 is the delay unit, I meantthe SRV-330 (I own both units and imo they re both fantastic. Erm... The CS-80 was an expensive
Re: [yamahacs80] Complete: Re: SY-1 service manual....?
2008-11-29 by Max Fazio
Great , David, it s a lot interesting for those solutions applied later on the CS-X0 M ... From: David Rogoff To: yamahacs80@yahoogroups.com Sent: Friday,
Re: [yamahacs80] good effects/reverb for a CS-60
2008-11-29 by Wavecomputer360
I think the CS benefits enormously from adding a Roland Dimension D and a huge, airy reverb ambience to it (Dynacord DRP-20, Lexicon 224, EMT 246, Roland
new CS-50 owner + Serial Number etc --changing filter caps
2008-11-28 by David
Im a new CS-50 owner (serial # 2580) Does anyone know how many were produced Mine is in brand new condition and has been hardly used Should I get the filter
Complete: Re: SY-1 service manual....?
2008-11-28 by David Rogoff
During breaks from eating lots of turkey and pie, I finished putting up the SY-1 manual. The direct link is here:
Re: good effects/reverb for a CS-60
2008-11-28 by blchrr@homecall.co.uk
Hey congrats on getting the CS80 pier, do you mind if i ask what you paid for it? Agreed Roland SRV330 is a great reverb unit. The big brother Roland R880 is
Re: [yamahacs80] good effects/reverb for a CS-60
2008-11-28 by THM
Hi, I m also pretty new in these forums here... Just bought a CS-80 from RL Music. For great reverb FX I d really recommend e.g. a Roland SDE-330. Although it
Re: [yamahacs80] good effects/reverb for a CS-60
2008-11-28 by JH.
The single-VCO per voice CS-50 and CS-60 benefit a lot from a clean echo/delay: When building up slowly evolving music, where the delayed signal merges with
Re: [yamahacs80] Re: CS80 legs?
2008-11-28 by Kent Friedman
I m using the same and so far it is great. Kent ... [Non-text portions of this message have been removed]
Re: [yamahacs80] good effects/reverb for a CS-60
2008-11-28 by rj krohn
i think reverb is the most beneficial effect for analog synths. i suggest an analog spring reverb. the peavey valverb is a rackmount spring verb that can be
Re: [yamahacs80] good effects/reverb for a CS-60
2008-11-28 by Wavecomputer360
And apart from your soft spot for CS-type synths you also seem to be rather fond of Ashra ;-). Stephen
good effects/reverb for a CS-60
2008-11-28 by oceanoftenderness
Hi, newbie question here. I recently purchased a CS-60 in perfect working condition (funny story it was used for 10 years at a clinic to produce sounds and