Emu XL-7 & MP-7 User's Group

ive followed all of  the instructions in the manual, and searched 
the message board and when when i try to update my os on the 
mp-7 from 1.00 to 1.32, i get this error code:

E-mu Systems, MP-7 -  mfgID: 24  prodID: 4.4.0.14  deviceID: 0  
revLevel: 80.76.48.56 ('PL08')
calculating checksum...
calculated checksum as 0xbdb6a0bb
checksum match
initializing the packet generator input stream
sending file dump header
File Dump Cancel received on packet 0
dumper exiting
Trackable not progressing. status: 3
download time: 0:0:0.630
progressResult: 2
tracker result: 0
dumper status: 5

any help?

> sending file dump header
> File Dump Cancel received on packet 0

Looks like the MP is rejecting the upload.

Do you have to replace the boot loader first (since you're at OS
1.00)? I seem to recall that there's another OS component that needs
upgrading.

-- 

  nick rothwell -- composition, systems, performance -- http://www.cassiel.com

--- Nick Rothwell <nick@...> wrote:
> > sending file dump header
> > File Dump Cancel received on packet 0
> 
> Looks like the MP is rejecting the upload.
> 
> Do you have to replace the boot loader first (since you're at OS
> 1.00)? I seem to recall that there's another OS component that needs
> upgrading.

Nick's right.  Try downloading commandprep10.dli first.  Since your
primary loader is at version 08 (that's what the PL08 means) you need
version 10 before you can download 1.32.  If it won't accept that
either, write back with a little detail about your setup and we'll give
you a hand.

-Aaron

__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com

where can i find commandprep10.dli? ive looked on the emu website and 
i cant seem to find it.  thanx for the help so far!


--- In xl7@yahoogroups.com, Aaron Eppolito <synthesis77@y...> wrote:
> --- Nick Rothwell <nick@c...> wrote:
> > > sending file dump header
> > > File Dump Cancel received on packet 0
> > 
> > Looks like the MP is rejecting the upload.
> > 
> > Do you have to replace the boot loader first (since you're at OS
> > 1.00)? I seem to recall that there's another OS component that 
needs
> > upgrading.
> 
> Nick's right.  Try downloading commandprep10.dli first.  Since your
> primary loader is at version 08 (that's what the PL08 means) you 
need
> version 10 before you can download 1.32.  If it won't accept that
> either, write back with a little detail about your setup and we'll 
give
> you a hand.
> 
> -Aaron
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your 
desktop!
> http://platinum.yahoo.com

Try getting 1.31 or 1.18.  It should be in the same zip file as those
OSes.  You don't have to download 1.18 or 1.31 before 1.32, just
commandprep10.dli.

-Aaron

--- beatphyle <beatphyle@...> wrote:
> where can i find commandprep10.dli? ive looked on the emu website and
> i cant seem to find it.  thanx for the help so far!


__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com