RE: [xl7] XL7 Pad velocity
2013-03-18 by Matt
... each preset of you turn the amp - velocity knob that will change the velocity of the pads. Only if that cord is set. Its all in cords. ... for playing
Messages
Browse messages
Page 28 of 476 · 23796 messages matched
RE: [xl7] XL7 Pad velocity
2013-03-18 by craig ward
If you go into global there are settings for velocity curve and also for each preset of you turn the amp - velocity knob that will change the velocity of the
Re: [xl7] Re: XL7: save midi settings?
2013-03-18 by Matt
Turn midi off for 1-8.
Re: [xl7] Menu lag?
2013-03-18 by Matt
... MIDI messages, but not the internal ones. Never tried it, but if it works that way, it s FAR better than pattern level settings and you are my hero, Matt.
Re: [xl7] Menu lag?
2013-03-18 by Bruno
2013/3/18 Matt ... I definitely do, thanks for spotting! ... Not sure if it won t just turn off the specific channel for incoming MIDI
Re: [xl7] XL7 Pad velocity
2013-03-18 by Matt
Research the patchcords your answer lies there
Re: [xl7] Menu lag?
2013-03-18 by Matt
I think u mean external bruno. Also go into midi menu and turn midi for that channel off. ... have encountered some serious lag and hiccups while scrolling
Re: XL7: save midi settings?
2013-03-18 by raabje
I might have the answer: http://launch.groups.yahoo.com/group/xl7/message/19585 The pattern with my midi settings was more or less empty. Changing midi
XL7 Pad velocity
2013-03-18 by raabje
hello group, One more. It seems to me that the pads of the XL7 aren t very sensitive for playing with different velocity. Notes sound more or less at the same
XL7: save midi settings?
2013-03-18 by raabje
Hello group, A new XL7 owner here. Still bussy figuring out a lot of things. I want the XL7 to sequence external gear, track 1 to 7, and the rest 8 to 16 to
Re: [xl7] Menu lag?
2013-03-18 by Bruno
Hi Jordan, 2013/3/18 jordan.sabie ... encountered some serious lag and hiccups while scrolling through the menu. Most likely it s the
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-15 by steve_the_composer
Footnote: Here s the link to the discuss of FX Send patchords: http://launch.groups.yahoo.com/group/p2k/message/15887 . In short, the P2K presets seem to use
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-15 by steve_the_composer
LOL! I didn t make the connection until you mentioned it. I assume you are referring to this thread: http://launch.groups.yahoo.com/group/p2k/message/15878 .
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-15 by K2500X
Steve, aren t you having deja-vu? I had this exact problem a few weeks ago when we discussed it. There is clearly something wrong with the older versions of
Re: Thud at start of 21:2 bas:Sonic [Deconstructing Presets]
2013-03-13 by Ricard
I experimented a bit more with this. The thud is definitely in the sample, and there s something weird going on in the amplifier envelope. With the release
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-13 by steve_the_composer
Yeah. Syxer started out as being the first step in a sysex display/analyzer program (MS-DOS command line program). Every couple of years or so I tweak it.
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-13 by Ricard
... I ll try out some more patches. At any rate they are a very definite improvement over the 2010 set. BTW, the program you ve used to manipulate the sysex
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-13 by steve_the_composer
Thanks for testing them; glad they loaded OK. If you don t have arps in your user slots, just load some in or point it to an arp in one of your other ROMs. I
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-12 by Ricard
... I rather think it s something else, for instance like you say below that there are references to non-existent resources in the files. The reason is that
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-12 by steve_the_composer
PS: If the 2013 version of the banks work for you, I will delete the 2010 versions and reorganize the folder (reword the write up, get rid of the whole thing
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-12 by steve_the_composer
Thanks for posting the XL-7 s sysex output. I explain it in the folder where you posted the output. Basically it is a whole bunch of cancel messages--I
Re: Sysex too fast?
2013-03-10 by Ricard
... In what way have they been problematic? I m not sure what you mean by Wear indicates performing well repeatedly. My XL-7 is actually a PX-7 in disguise.
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-10 by Ricard
... Yes, that s the set. Although at the time it seemed that at least someone on the list tested it with success, which is why I think it s strange that I
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-10 by Ricard
... Yes, I probably could, by sending the dump from one computer and capturing the MIDI output on another, if nothing else. I ll see when I can get around to
Re: [xl7] Re: Sysex too fast?
2013-03-10 by Matt
My worn unit px7 has not manifested any problems but my unworn units have been problematic. Wear indicates performing well repeatedly. ... My worn unit px7 has
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-10 by steve_the_composer
I see that I posted a set in 2010. Is that the set you are having problems with? Based on the readme file, I see that I simply changed the ROM ID to point to
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-10 by steve_the_composer
I am wondering if the outgoing midi out led is a sysex error message. Can you capture it? Where are the P2500 -- P2K ROM files? I will take a look to see if
Re: Composer ROM knob assignments
2013-03-10 by Ricard
... At one point I was thinking of locating one of the E-Mu samplers that can perform sound authoring for the XL-7, and then dumping a bunch of classic drum
Re: Sysex too fast?
2013-03-10 by Ricard
... I would rather express it this way: At lower then maximum temperatures one can expect a higher number of write cycles than it says in the specification.
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-10 by Ricard
... I agree. I think that s what they mean too. ... I m using a sysex dump program, so there s no tempo adjustment, however I can specify a delay between each
Re: Sysex too fast? >> MIDI SYSEX PACKET DELAY
2013-03-09 by steve_the_composer
Thanks for the pointer to p. 168 of the XL-7 Manual. This parameter only affects sysex out. (See paragraph 1 below.) I believe the manual is talking about
Re: [xl7] Re: Sysex too fast?
2013-03-09 by Bruno
2013/3/8 Ricard ... XL-7 is transmitting data to a sequencer, not receiving? The manual says it influences both, but I have no detailed
Re: [xl7] Re: Composer ROM knob assignments
2013-03-09 by Matt
... and ... terribly useful, and seem like they ve put them in just to fill up the available banks, the remaining 10% are really nice and on their own warrant
Re: [xl7] Re: Sysex too fast?
2013-03-09 by Bob S.
Just need someone with an SMT desoldering station and good SMT soldering skils.... Sent from my iPad ... Just need someone with an SMT desoldering station and
Re: [xl7] Re: Sysex too fast?
2013-03-09 by Bob S.
eBay, less than $10usd. Sent from my iPad ... eBay, less than $10usd. Sent from my iPad On Mar 8, 2013, at 8:09 PM, Royce wrote:
Re: Sysex too fast?
2013-03-09 by Royce
Hi Ricard ... You are right. Sorry about my mistake. I was also unaware that high temperature would reduce the write cycles. ... Absolutely, this is how I
Re: Composer ROM knob assignments
2013-03-08 by Ricard
... No, I m not disappointed, while I must say that 90% of the sounds aren t terribly useful, and seem like they ve put them in just to fill up the available
Re: Sysex too fast?
2013-03-08 by Ricard
... I thought the sysex packet delay setting on the XL-7 is involved when the XL-7 is transmitting data to a sequencer, not receiving? /Ricard
Re: [xl7] Re: Composer ROM knob assignments
2013-03-08 by Susan Subtract
No, it was defintely here. A veritable dissertation on 12 vs 16 knobs.
Re: [xl7] Sysex too fast?
2013-03-08 by Bruno
Hi Richard, 2013/3/7 Ricard ... it sends an EOX (F7h). But even with a delay of one second for each EOX I still get the dreaded message
Re: Sysex too fast?
2013-03-08 by Ricard
... Yes, but it is soldered in place (56 pin TSOP package) so it requires surface mount soldering skills to replace it. Besides, I m not sure that the machine
Re: Sysex too fast?
2013-03-08 by Ricard
... In principle you are right. The flash chip in the XL-7 is an Intel E28F640, which has a minimum specified erase cycle count of 100,000. Note, it s not the
Re: [xl7] Re: Composer ROM knob assignments
2013-03-08 by Matt
The controller assognments for the rack roms really arent that different and tbqh ur getting hooked up with an extra 4 controllers by using a command station.
Re: Composer ROM knob assignments
2013-03-08 by steve_the_composer
I seem to recall a discussion recently about the 12-controller ROMs and the 16-controller ROMs and related issues. If it wasn t here, it was in the P2K User
Re: [xl7] Re: Sysex too fast?
2013-03-08 by Matt
Is the flash replaceable
Re: Sysex too fast?
2013-03-07 by Royce
Factory reset the unit first then try to load the file. Try another sysex file. If it stops in the same place or the factory reset takes a long time then you
Re: Sysex too fast?
2013-03-07 by Ricard
It seems that there s either an error in the files, or I m doing something very wrong. If I reboot the XL-7, it appears to load the patches up until patch 37
Sysex too fast?
2013-03-07 by Ricard
I m trying to download the P2500-patches-for-Composer banks from the group files area to my XL-7. However, I keep getting Error! Code = 000 Sysex: too fast
Re: Composer ROM knob assignments
2013-03-06 by Ricard
... Figures, although it would have been nice if the 12 knobs on the P2k were a subset of the 16 on the XL-7; i.e. 4 of the (least useful) knob assignments
Re: [xl7] Composer ROM knob assignments
2013-03-06 by Matt
True for all racks with 12 knobs