Re: [xl7] Re: Transferring patterns
2014-01-14 by Matt
Is there a way to build an alternate to e-loader which works over usb?
Messages
Browse messages
Page 22 of 476 · 23796 messages matched
Re: Transferring patterns
2014-01-13 by steve_the_composer
With midiox monitoring the data, from e-loader 1.1 I captured (1) the Rescan button output (Device Query) and (2) a sequence (Get this sequence) going from a
Re: [xl7] Re: Transferring patterns
2014-01-13 by Matt
I think eloader works in wine. Not 100% sure, give it a try and lmk
Re: Transferring patterns
2014-01-13 by steve_the_composer
I believe the song dump format is part of the midi specs. I wasn t able to find the discussion in the archives. Also, do a dump to e-loader and monitor/capture
Re: Transferring patterns
2014-01-13 by <ricard2010@...>
Right now e-loader runs fine on an old PC on which I run Windows 98 (because that s basically what it s capable of Windows-wise, and it s handy to have
Re: Transferring patterns
2014-01-09 by steve_the_composer
I agree with Matt that usb transfer is much quicker than midi. Unfortunately for me, the emu usb drivers haven t worked on my XP PC since SP2 or SP3. I believe
Re: [xl7] Transferring patterns
2014-01-08 by Matt
Eloader works with usb (faster, doesn t take up ur midi ports) and u can swap patterns from memory slots while the emu plays. I think that is the best option?
Transferring patterns
2014-01-08 by <ricard2010@...>
I use E-Loader really only for transferring patterns to my computer for backing up. However, it occurs to me that it must be possible to write something more
Re: Connecting The Command Station to a PC
2013-12-20 by steve_the_composer
Sounds like you have been doing some exploring. I have a few comments to add. ... Steve: yeah--E-Mu usb port is only for doing stuff with e-loader, though one
Connecting The Command Station to a PC
2013-12-19 by Scott E. Whitehead
I ve finally got Proteum connecting reliably and here s what I learned, or at least my impressions. I m not an expert so please correct as appropriate. I m
RE: [xl7] RE: Clicks&pops
2013-12-18 by Matt
Mine is not grounded. If I ground the ring on the digital out it will work fine, if not digital won t lock. On Dec 18, 2013 11:28 AM, Andrew Mansfield
RE: [xl7] RE: Clicks&pops
2013-12-18 by Andrew Mansfield
Okay... so this is going way beyond the shallow bounds of my memory... but I seem to remember there being a run of machines that somehow didn t have the
RE: Clicks&pops
2013-12-18 by <ricard2010@...>
No I don t have the service manual unfortunately. According to EPR Electronics it is/was only available to authorized service centers. /Ricard
RE: Clicks&pops
2013-12-18 by <ricard2010@...>
Yes, but it was not sufficient. Even had an idea of using a Peltier element, but that would require some serious cooling to get the temperature down. And also,
Re: Pattern Channel Assign
2013-12-16 by steve_the_composer
Yeah--just patterns, songs, and changing the OS--not presets. Oh well.
Re: [xl7] Re: Pattern Channel Assign
2013-12-16 by Scott E. Whitehead
Eloader works fine for me. Personally, I m looking forward to having a gui for the patch editor. Funny you should mention linux, when Steve mentioned his other
Re: [xl7] Re: Pattern Channel Assign
2013-12-16 by Matt
I think I was able to get eloader working on linux with wine. Ill try it and make sure when I have more time. I think eloader only saves patterns and not
Re: Pattern Channel Assign
2013-12-16 by steve_the_composer
Glad the CC trick worked. I use WixXP (the soon to be murdered WinXP). Ever since SP2 or SP3 I have not been able to get the E-Mu usb drivers working. I am
RE: [xl7] Re: Pattern Channel Assign
2013-12-16 by Scott E. Whitehead
Steve- Thanks a lot. I didn t see your patches but I did the CC data trick and that worked great. The trade-off is the track lights indicate that there s
Re: Pattern Channel Assign
2013-12-15 by steve_the_composer
In the Files section, I uploaded so sample pattern templates designed to send midi data from a Command Station Sequencer to external gear. I took them from
Re: Pattern Channel Assign
2013-12-15 by steve_the_composer
If I understand correctly, you are talking about saving a pattern with empty tracks designated to send midi data to external gear. If you save it without any
Pattern Channel Assign
2013-12-14 by Scott E. Whitehead
This has come up recently in the effect send conversation but there s still a question about saving alternate track MIDI outputs. Say you have a piece of
RE: Clicks&pops
2013-12-14 by <vic.doulepov@...>
Did you try attaching a heat sink to the problematic chip?
Re: [xl7] RE: Clicks&pops
2013-12-14 by Matt
Do you have service manual for emu command station? I would like to source more reliable switches.
Re: Fwd: [p2k] Any interest remaining in a self-programming FLASH SIMM?
2013-12-14 by AJ
This looks good to me. The original boards are definitely overpriced.
Re: [xl7] RE: Clicks&pops
2013-12-13 by Nathan Steele
Ah yes, they are discontinued. The PLCC version seems to be more scarce also. Perhaps they used them in the Proteus 2000 racks also? those sell much cheaper
Re: [xl7] RE: Clicks&pops
2013-12-13 by Nathan Steele
Well, my apologies then :) I apparently haven t kept up with FPGA s too well.
RE: Clicks&pops
2013-12-13 by <ricard2010@...>
... Traditionally, FPGA:s were designed as you say, with some form of fusable link technology akin to a PROM which had to be programmed once and for all.
Re: Understanding envelop time quick edits
2013-12-13 by steve_the_composer
More testing (Switched to Q Bass ROM Instrument on one of my ROMS to really hear the attack): MidiE - VEnvAtk -022 [negative numbers = inverse] Attack1 7 0%
Re: Understanding envelop time quick edits
2013-12-13 by steve_the_composer
This is interesting. I never played with this systematically before. I seemed to duplicate your results. My gut inclination was to say its coded as an inverse
Re: [xl7] RE: Clicks&pops
2013-12-13 by Nathan Steele
... UMMMM...... You do know that an FPGA needs to be programmed right? It won t do a darn thing if it s factory fresh, or has the wrong programming. You d
RE: Problems in pattern trigger mode
2013-12-13 by <ricard2010@...>
No I was not using XMIX when this happened. I haven t tried removing any pre-sequence info from the pattern to see if that makes a difference. When changing
RE: Fwd: [p2k] Any interest remaining in a self-programming FLASH SIMM?
2013-12-13 by <ricard2010@...>
I still think this sounds like an interesting project. Some of the ROM boards are starting to sell for ridiculous prices when they do appear, so I think
Understanding envelop time quick edits
2013-12-13 by <ricard2010@...>
There s something I ve been wondering about for a while: When editing envelope time parameters, such as attack or decay, a value of 0 means instantaneous ,
RE: Clicks&pops
2013-12-13 by <ricard2010@...>
My XL-7 exhibited a problem like this. The clicks were present on both the analog and S/PDIF outputs, and were apparently processed by the effects processor as
RE: [xl7] Re: Effect Send Cord?
2013-11-30 by Scott E. Whitehead
Thank you Steve and Matt. The track 16 fx solution is just the sort of creative problem solving I hoped for. Looking at it more and at the second PatchCords
Re: Effect Send Cord?
2013-11-30 by steve_the_composer
The discussions here (and in those threads) might be useful to you. The second one points to two additional posts.
Re: Effect Send Cord?
2013-11-30 by steve_the_composer
Matt replied to the knob setting thing. I will look for some posts related to how to set up an FX channel. I know it has been discussed several times. I used
Re: Effect Send Cord?
2013-11-30 by nikitsanpsix
... Thank you for sharing this. But I can`t seup this for myself. Can you tell me about how to setup this FX track more detailed? Can I use CS knobs on page
Re: [xl7] Effect Send Cord?
2013-11-30 by Matt
As far as knob to effects send u have to choose an effects channel and then route to your ccs to fx sends in the patchbay on the preset a f a i k. I make a fx
Effect Send Cord?
2013-11-29 by Scott E. Whitehead
Finally got my XL7 connected to Prodatum and Proteum. I was holding out for a USB connection to Windows 7 but finally surrendered and got traditional MIDI
RE: E-Loader installation
2013-11-25 by <hoodhendrix@...>
Try http://www.e-univercity.com/SynthGearDocs/ Man trust me it s a pain but it can be done. I got everything I needed from here.
E-Loader installation
2013-11-24 by <micheal.pacheco@...>
So I have Windows XP in vm-ware, and downloaded E-Loader 1.0 from the files section here, and it says it installs but I don t see an executable anywhere and no
Re: Problems in pattern trigger mode
2013-11-13 by steve_the_composer
I will assume that a later reply didn t resolve the issue: http://launch.groups.yahoo.com/group/xl7/message/23430 Also, I will assume you are not using XMIX
Re: Change tracks/change presets
2013-11-13 by steve_the_composer
I have some ideas, but I am not entirely sure what you are doing. Depending on what you are doing, it could be different things. I will try the simple
Re: Clicks&pops
2013-11-13 by steve_the_composer
If the clicks are not on the sub outs (i.e., they are only on the main outs), try this thread: http://launch.groups.yahoo.com/group/xl7/message/20422. Steve
Re: Clicks&pops
2013-11-12 by steve_the_composer
(1) Is this on the digital outs? (2) Are the clicks there when you route audio to the sub outs and monitor the sound from the sub outs? If (1) = No and (2) =
Change tracks/change presets
2013-11-12 by <loren_steele@...>
After finding a preset that I like for a track and recording it on an mp7 os 2.0, when I change to the next track it changes the preset on the previous track?
Clicks&pops
2013-11-12 by <loren_steele@...>
I have done some searching on google and this list and haven t found a solution for the clicks I hear on my mp7. I read on tarekeiths FAQ that it could pertain
RE: Problems in pattern trigger mode
2013-11-11 by <ricard2010@...>
To clarify, it s not arp trigger, it s triggering ordinary patterns, or rather selecting them as the next pattern (the pattern doesn t change immediately when