Re: [xl7] Re: A challenge, a patch, a question...
2019-05-26 by smw-mail@...
Thanks for the tip about the radio buttons for the different access methods. I saw them but didn t try the one that was selected by default. I will check that
Messages
Browse messages
Page 2 of 476 · 23796 messages matched
Re: [xl7] Re: A challenge, a patch, a question...
2019-05-26 by rpcfender@...
Hi Steve, this problem occurred with the direct access to the ROM data above bank 3 - which was the normal way I accessed the data (perhaps not part of E-mu
Re: A challenge, a patch, a question...
2019-05-26 by smw-mail@...
For reasons I won t detail (because I have already written about them), I don t use Prodatum. In short, it has some very good features; however, it had and may
Re: [xl7] Re: A challenge, a patch, a question...
2019-05-26 by smw-mail@...
You have a pop-up warning that says the software cannot access banks greater than bank 3 on Command Stations. I verified that the software cannot get bank 4
Re: [xl7] Re: A challenge, a patch, a question...
2019-05-26 by rpcfender@...
I don t have a Proteus 2500, but I am led to believe it uses the same sysex as the Command Station. I do have a XL7 in a MP7 and that is what I tested the
Re: A challenge, a patch, a question...
2019-05-25 by smw-mail@...
Over the past 2 days I have been teaching myself to use some of the features of Royce s E-Mu Librarian and have been finding it extremely useful so far in
Re: [xl7] Re: A challenge, a patch, a question...
2019-05-24 by rpcfender@...
You are right. I should have looked at the drawings on the spec sheet instead of misreading the text. Thanks for the save Ray. Royce
Re: [xl7] Re: A challenge, a patch, a question...
2019-05-23 by D F Tweedie
Pardon the slightly off topic request ... Where can I find a link to Royce s E-Mu Librarian Steve mentioned? I googled without success. Thanks. DF On Thursday,
Re: A challenge, a patch, a question...
2019-05-23 by rpcfender@...
I should have mentioned that, I as I recall, the encoder is a Bourne s PEC16 range. Probably a PEC16-2220F-N0024 PEC16 encoder type -2 = vertical mount with
Re: A challenge, a patch, a question...
2019-05-21 by smw-mail@...
Thanks for mentioning these tools, Royce! I know I looked at Mark s site before--a few years ago (2013) I think when you were telling me about the BCR/BCF and
Re: A challenge, a patch, a question...
2019-05-20 by smw-mail@...
Thanks for chiming in on this, Bruno! I was thinking of you as I read the P2K threads on this last night. Funny how the new and improved workaround came
Re: A challenge, a patch, a question...
2019-05-20 by smw-mail@...
Some footnotes: (1) Re: the Extension Interval bug ... Bruno suggests having preset pairs and switching from one Ext Int preset with the desired value (= 12
Re: A challenge, a patch, a question...
2019-05-18 by smw-mail@...
Over the past 2 days I have continued exploring the potential for arps (families of arp presets). This time I revisited extension count and extension
command station rack ears
2019-05-18 by wmills@...
Does anyone have an extra set to sell?
XL-7 Patterns with XL-1 Rom ?
2019-05-12 by mickymoog2000@...
Hi, this is my first post on this group. Have accumulated lots of E-MU gear over the past 15 odd years, was lucky enough to live close to there EU head office
Re: Sysex again
2019-03-26 by smw-mail@...
I just managed to get Prodatum 2.0.1 to boot and sync with 1 E-Mu box and I can confirm that the log does display sysex. If anyone wants to use that feature
Re: [xl7] Re: Sysex again
2019-03-25 by rpcfender@...
Thanks Jan. I had missed this. All the best Royce
Re: [xl7] Re: Sysex again
2019-03-25 by smw-mail@...
Jan, good to know. BTW, I m not sure if you saw my post somewhere (maybe a year ago? in one of the Yahoo! forums or in your bug-reporting forum) that I
Re: Sysex again
2019-03-24 by rpcfender@...
Hi Steve I haven t read the whole thread so please forgive me if I am barking up the wrong tree. Proteus family 2.2 sysex page 6 for parameter F0 18 0F dd =
Re: [xl7] Re: Sysex again
2019-03-24 by smw-mail@...
... Good to know. I tested a few things from the front panel of my P2500 and they were all next-note-triggered changes. If you are just needing this for
Re: [xl7] Re: Sysex again
2019-03-24 by Paul Lanctot
No, not change while note is sustaining - it’s just for when i’m editing the preset. thanks! Sent from my iPhone
Sysex again
2019-03-23 by shad_dart@...
Ok I know there was talk of using sysex and there is a sysex folder but I can t seem to locate the sysex manual . I want to use sysex to control (mute / solo
Re: For Sale: PX-7 w/Protean Drum & Composer ROM
2019-03-18 by wmills@...
I know it s the longest shot ever, but is this still available?
Re: [xl7] MP-7 power issue
2019-03-17 by Daniel H
do any of the leds turn on when you try to power the it? On Sat, Mar 16, 2019 at 12:52 PM ata843@yahoo.com [xl7] ... do any of the leds
MP-7 power issue
2019-03-16 by ata843@...
Hi guys, I had an issue a few months ago that my command station didn t power up. I gave the power supply to my friend to check it but he said there is nothing
Re: RACK EARS Re: [xl7] Re: Command Stations vs P2500 ?
2019-03-10 by D F Tweedie
Steve ... There are several iterations of the Z-SYS Digital Detanglers with various configurations of AES, S/PDIF and Toslink/ ADAT i/o to patch with. The
Re: OS 2.0 Update, E-Mu Docs, Resources, etc.
2019-03-10 by smw-mail@...
I didn t post the PK OS update because I hadn t tested it myself (no PK). However, I just found where I got it from:
Re: RACK EARS Re: [xl7] Re: Command Stations vs P2500 ?
2019-03-10 by smw-mail@...
... Thanks for the lead; in recent years (trying to go digital audio) I have wondered if anyone made such a device--but could never find anything based on the
RACK EARS Re: [xl7] Re: Command Stations vs P2500 ?
2019-03-09 by D F Tweedie
I forgot whether I got them on ebay ... but I think so. You can always do a search on ebay and even if what you are searching for is not available, you get an
Re: [xl7] Re: Command Stations vs P2500 ?
2019-03-08 by Ray Bellis
Thanks all for the info, and to Steve for the photos. I think I m going to conclude that the CS and P2500 units *are* the same, and that since I have quite
Re: [xl7] Issues with Yahoo! Groups (apologies for attempted posts of pix)
2019-03-08 by Bruno
Steve, don t worry about stuff like that. You are doing great job, both as a moderator and as a contributor. I think this is a perfect opportunity to confirm
Re: [xl7] Issues with Yahoo! Groups (apologies for attempted posts of pix)
2019-03-08 by smw-mail@...
Thanks for the confirmation that its not just me. Knowing that other groups are experiencing issues too helps.
Re: [xl7] Issues with Yahoo! Groups (apologies for attempted posts of pix)
2019-03-08 by D F Tweedie
Steve ... FWIW I moderate another Yahoo group and we ve also been experiencing delays and quirks. DF On Thursday, March 7, 2019, 4:38:07 PM PST,
Re: Great thread
2019-03-07 by musicman11712@...
I agree; it is a great thread. Balma definitely knows his patchcords and complex sound design using the P2K synth engine. Lots of other useful info in that
Re: [xl7] Re: Command Stations vs P2500 ?
2019-03-07 by D F Tweedie
That advantage must depend upon what easily means. :) I had mine well racked in an onstage, slant-top mixer rack. Rack ears were available, if pricey. DF On
Re: Command Stations vs P2500 ?
2019-03-07 by Armen
Sound on Sound s review confirms the 24-bit point: https://www.soundonsound.com/reviews/emu-proteus-2500 I d say go for the Proteus 2500 if you don t plan on
Command Stations vs P2500 ?
2019-03-06 by rogers t
Not really an answer to your question, but a little more info. From what I ve seen, there were revisions through the run of some of the product lines. I ve
Re: Command Stations vs P2500 ?
2019-03-06 by smw-mail@...
... I believe the PR for both were different--based on your links and other PR which can be found at the Way Back Machine. The XL-7 PR emphasizes the Audity
Re: Command Stations vs P2500 ?
2019-03-06 by smw-mail@...
Hmmm. I replied, but it did not get posted. Oh well. (1) I thought the CS/P2500 were based on the same chips which differ from the 1ru e-mus. (2) I have
Command Stations vs P2500 ?
2019-03-05 by Ray Bellis
According to these two pages: the P2500 apparently has higher resolution
Re: [xl7] OS 2.0 Update, E-Mu Docs, Resources, etc.
2019-02-16 by Ray Bellis
... It was on one of the archive sites, quite probably the one run by smw (http://www.e-univercity.com/SynthGearDocs/) There s rumours of a 1.07 release, but
Re: [xl7] OS 2.0 Update, E-Mu Docs, Resources, etc.
2019-02-16 by Ray Bellis
... Steve - thanks, again, for the mention of my uploader site. FWIW, I ve personally used it to upgrade at least four of my own synths, including: - E6400
OS 2.0 Update, E-Mu Docs, Resources, etc.
2019-02-14 by smw-mail@...
... First of all, Welcome!!! Some background: Creative s E-Mu support pages went down several times like around 8 years ago or so. A couple of dedicated E-Mu
Re: E-Loader
2019-02-13 by ricard2010@...
Looking at my previous post it s rather incomprehensible out of context - what I meant is that the thread from 2014 that Steve was referring to was initiated
Re: E-Loader
2019-02-11 by smw-mail@...
Thanks for picking up on this, Ray. My E-Mu web midi I/O using the jazz-soft plug-in is on the hard drive of an XPSP3 PC that developed a major issue after I
Re: [xl7] E-Loader
2019-02-11 by Ray Bellis
... The E-loader app pre-dates the addition of javax.sound.midi to J2SE. It therefore uses a separate DLL (using JNI to add native code to Java apps) to gain
Re: [xl7] Tool to Update OS via webmidi . . .
2019-01-27 by smw-mail@...
See the 462prep.zip file. That might have some useful info; not sure, but maybe. Steve
Re: [xl7] Tool to Update OS via webmidi . . .
2019-01-27 by smw-mail@...
Excellent news!!!! I had picked up, wiped clean, and surface scanned some 3/5 floppy drives because the price on ebay jumped from like $8 to something like
Re: edit arp settings via sysex
2019-01-16 by smw-mail@...
I do not recommend editing arp patterns on-the-fly [i.e., while performing] either via sysex or via preset/patch editing software. Yes, both can be done, but
Re: Modded Command Stations
2019-01-02 by smw-mail@...
Evidently in 2006 I tested the use of direct parameter sysex to change arp patterns within a SONAR midi track. NOTE: This is just an example based on the file