I am using the MP-7 through a Tascam US-428 to Cubase 5.1. I thought something was wrong with my setup at first because the recordings had no waveform. After about 30 minutes of fiddling around I hit play and heard that they actually did record. I had to stretch the display to its maximum track size just to see a little bit of waveform. Thats when I normalized the recordings so that I could see the waveforms for editing. I did not notice any additional noise, but I just wanted to see if anyone else has experience with this. If SPDIF does not have a noise floor I think that it would be simpler and quicker to just normalize everything on the PC rather than adjust each preset manually to get a hot signal without clipping. It also saves preset slots for me since sometimes my only modification is to increase AMP VOL. --- erik_magrini@... wrote: > Well, to be honest, the SPDIf signal from the XX-7's > is actually pretty > weak. It's far below what it could be, so you'll be > normalizing your > recordings by a greater amount than if you were to > just use the regular > audio outs where you could send a hotter signal. > Anyway, yes in theory > you should be able to normalize your digital signal > without adding (or > boosting I should say) any additional noisefloor > artifacts. BTW, why are > you wanting to normalize them in the first place? > > rEalm > > > > I know that it is good recording practice to get the > hottest signal > from the source without clipping to get a good > singal to noise > ratio. Is this required for SPDIF? I am thinking > that since the > connection is digital I should be able to record > from the MP-7 then > normalize the recordings on my PC without boosting > noise. Does > anyone have experience with this? It will save me a > lot of time vs > editing all presets and boosting the AMP VOL there. > > Thanks, > > Kris > > > > To unsubscribe from this group, send an email to: > xl7-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to > http://docs.yahoo.com/info/terms/ > > > > > > > > [Non-text portions of this message have been > removed] > > __________________________________________________ Do you Yahoo!? The New Yahoo! Search - Faster. Easier. Bingo http://search.yahoo.com
Message
Re: [xl7] recording from SPDIF output?
2003-04-22 by Kris Musard
Attachments
- No local attachments were found for this message.