Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Index last updated: 2026-04-14 00:15 UTC

Message

Link to RP Site was TSCY

2002-06-10 by emufreak1

--- In xl7@y..., "mp3.com/koering" <A.Libi@b...> wrote:
> where can i find the site of rop papen...
> can anyone give me the link?


http://216.71.56.251/
http://groups.yahoo.com/group/orbit3


> ----- Original Message -----
> From: "emufreak1" <mmcquay@m...>
> To: <xl7@y...>
> Sent: Monday, June 10, 2002 9:50 PM
> Subject: [xl7] Re: I got the Techno Synth Rom, i wanted to download 
to the
> XL Extension Presets...
> 
> 
> > NiR,
> >
> > You will not(cannot)overwrite the "ROM".  The arp patterns will 
load
> > in the "User" arp locations on your unit and the presets will load
> > into user bank 2(make sure you relocate any personal presets that 
you
> > have in that bank).  If you open up the read me file that is 
enclosed
> > in the Zip file, it will have all the info you need.  Also verify
> > which ver. ROM you received so that you download the correct
> > presets.  This can be done simply by scrolling to Techno ROM 
preset
> > 127 in bank 3 which is usually a default and should have the 
version
> > # in it.
> >
> > Later,
> >
> > M2
> >
> >
> > --- In xl7@y..., "nbaryosef100" <nir.baryosef@v...> wrote:
> > > I got the Techno Synth Rom, I wanted to download to the XL
> > Extension
> > > Presets and ARP patterns from Papen web site but before I do 
that
> > > small question.
> > >
> > > Now I have 2 ROMs inside my XL I will make sure that the *.mid 
will
> > > be downloaded into the Techno Synth Yard ROM and not the XL1 Rom
> > > inside.
> > > Is there anything I need to do before downloading the files???
> > >
> > >
> > > Thank you
> > >
> > > <<|_NiR_|>>
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > xl7-unsubscribe@y...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/
> >
> >
> >

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.