Emu XL-7 & MP-7 User's Group

Just a thought, the v1.31 manual says that you can view this tick for 
removing xl7 presequence setup data from external tracks (but doesn't 
mention adding anything in there yourself). Maybe there's a way of getting 
some xl7 data in there which can then be changed to an external cc as the 
tick only seems visible when there's something already there?

Does that make any sense, and if so can you think how the xl7 data can be 
put in there?

PS. Tried controlling the korgs for the first time since the change in o/s 
and the prog change events at 001.01.001 are still too late.

>From: "peebs uk" <peebs_uk@...>
>Reply-To: xl7@yahoogroups.com
>To: xl7@yahoogroups.com
>Subject: Re: [xl7] Re: Prog change msgs to another groovebox/pattern 
>sequencer
>Date: Mon, 29 Apr 2002 14:46:15 +0000
>
>Thanks for the advice Mike, I think that would do the trick if... I wasn't
>having the same problem as you! Just tried to add a cc event on an external
>only track and the lowest tick I can use is 001.01.001 (running o/s 1.31)
>
>As you're experiencing the same problem should I repost this with the
>subject 'Can't enter event at tick 001.01.000' or has this problem already
>been discussed with no solution?
>
>Thanks,
>
>Steve
>
> >From: "mikexl7" <mikexl7@...>
> >Reply-To: xl7@yahoogroups.com
> >To: xl7@yahoogroups.com
> >Subject: [xl7] Re: Prog change msgs to another groovebox/pattern 
>sequencer
> >Date: Mon, 29 Apr 2002 14:04:28 -0000
> >
> >Well there is the ability to place cc info on the tick 001.01.000 in
> >the list editer but mine has stoped working for some unknown
> >reason.  Asuming that yours is not doing what mine is just go into
> >the list editer and press the repeat button and then select the cc
> >info to send a program change.
> >
> >P.s. the track has to be set to external to access the tick
> >001.01.000.
> >
> >I think this will work.
> >
> >Mike G
> >
> >--- In xl7@y..., "peebs uk" <peebs_uk@h...> wrote:
> > > I want to use the XL7 to control and change patterns on 3 other
> >groove boxes
> > > (Korg Electribes). The problem is that the prog change is usually
> >received
> > > just after the pattern starts, causing the new pattern not to kick
> >in until
> > > the end of the current one.
> > >
> > > Does anyone out there have any idea how I'd get these to be
> >received just
> > > before the pattern starts? The alternative is to put the program
> >changes at
> > > the end of the preceding pattern but that mean I won't be able to
> >change
> > > them on the fly.
> > >
> > > Cheers,
> > >
> > > Steve
> > >
> > > _________________________________________________________________
> > > MSN Photos is the easiest way to share and print your photos:
> > > http://photos.msn.com/support/worldwide.aspx
> >
>
>
>
>
>_________________________________________________________________
>MSN Photos is the easiest way to share and print your photos:
>http://photos.msn.com/support/worldwide.aspx
>




_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx