Emu XL-7 & MP-7 User's Group

yes I had not looked at the usb port on my box till i pluged in my 
usb cable.  It seemed not to be mounted properly in the inside of 
the box.  I very carefully pressed the conecter down.  There are two 
little bumps on the bottom of the usb conecter that have to be 
mounted firmly on the board, mine where loose.  So a little press 
down caused them to click into place and all was good.  You may want 
to take a quick look inside the box......thats if you are 
comfortable doing so.

well hope that helps.

Mike

--- In xl7@y..., "hysham2000" <isham@f...> wrote:
> Thank you so much !
>  
> Now I understand what this usb port is for... I installed the 
right 
> driver and windows recognize him but now I've got an hardware 
problem 
> with this port : it's  broken and moves somewhere in the box...I 
saw 
> the first time I plugged my usb it was fragile and make a real 
> attention to go softly without succes... I have to send this 
machine 
> back...
> Does  someone has the same experience ?