Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Index last updated: 2026-04-14 00:15 UTC

Message

RE: [xl7] Re: my XL-7 does't start anymore !!!

2010-11-13 by craig ward

Sounds like the same problem I had :( I tested and there was no output on the power supply at all so I went ahead and ordered one from eprelectronics. Its still in the mail so when it gets here i'll let you know if it fixes the problem or if the motherboard is toast. Usually you can look at a PC board and see a visible sign of a burn out so have a close look at that, and also smell the power supply, if its cooked it will have a burn smell about it.

To: xl7@yahoogroups.com
From: dacian_victor@...
Date: Sat, 13 Nov 2010 14:05:23 +0000
Subject: [xl7] Re: my XL-7 does't start anymore !!!


ohh man, i think is kind of bad.
I just had a friend with a multimeter, and. The fuse is ok. And on the pins coming from the electric source there is 9 volt on (yellow and brown). We have no idee what should it be. Any advise would be very apreciate. /Thanks, guys

--- In xl7@yahoogroups.com, "nenad.lonic" wrote:
>
>
>;
> --- In xl7@yahoogroups.com, XL-7 Group wrote:
> >
> >;
> > Hi Guys,
> > I have no ideea what could it happend, yesterday my xl was working perfect and now is not starting. Is looking like no electricity is getting in. I check different cables and different electricity sources. Have any ideea?
> > Thanks
> >
>
> Open her up, and check that the connector that comes from the on/off button hasn't come out. While it's open put a multimeter across the on/off switch pins and check that its still working
>


Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.