steve_the_composer wrote: > STEVE: > Using Sonar, I just successfully transferred XL-1 multis (977 byte > multis) into my XL-2500 w/OS2.0 (1373 byte multis). To see if the > transfer took place successfully, set the master/global menu display > to MULTISETUP NAME. After the transfer, the new name should be > there. > Paul: I'm also pretty sure I've transferred multis from my P2K to my P25K but doing it the other way round is currently eluding me. > BTW, I seem to recall that all ports are note created equal and I am > wondering if that makes a difference. > Paul: I'm using port A in both cases; discovered you needed port A for receipt of MIDI clock for the effects so kinda expected this was the "main" one. > > STEVE: You can do this with the aid of sequencer software; not sure > if you can embed remote control sysex in a pattern to automate the > process using just 2 E-Mus. (It might be possible, though. If anyone > wants to try, I'd encourage it and help.) > Paul: this sounds encouraging. Unfortunately I don't use software sequencers, just hardware step sequencers. I do have MIDI-Ox though but I'm afraid my sysex hacking is no more advanced than being able to search for and change strings. Many thanks for your thoughts, I'll keep trying. Ultimately I may just get both machines out of their racks, swap the ROMs around, make a paper note of all the patches in all the multis I need, then put the ROMs back and do it all by hand. It's my own fault for simply dumping each multi into MIDI-Ox and assuming they'd load back in afterwards just cos the banks did. Cheers -- Paul --- "Effectus super absolutionem" http://www.JointIntelligenceCommittee.com http://www.myspace.com/jointintelligencecommittee
Message
Re: [xl7] Re: Multi transfer between models
2007-06-14 by Paul Nagle