Emu XL-7 & MP-7 User's Group

I rarely use both because then the programmable knobs' MIDI
messages are not sent to the external instruments.
Otherwise works as expected.

    Zsolt


----- Original Message ----- 
From: "Chris" <cdh79@...>
To: <xl7@yahoogroups.com>
Sent: Monday, June 04, 2007 9:47 PM
Subject: RE: [xl7] Re: Using the MP7 to control external sound modules


> This is actually done in the very same menu..
> 
> In the Pattern Edit menu one of the last menu-settings is called "assign
> channels" (or similar, i'm currently not at my gear) and in the bottom
> row, it shows you the selected midi channel on the left and "dest:" on
> the right.. the values for "dest" can be set to "int", "ext" and
> "both".. i guess it's self-explaining that "int" means internal, "ext"
> stands for external and when having the value at "both", the data is
> used for as well internal, as external communication..
> 
> i actually use the "both" setting quite often, to combine the sounds
>>from my roms with pads on my samplers or other gear.. 
> 
> Chris
> 
> 
> -----Original Message-----
> From: xl7@yahoogroups.com [mailto:xl7@yahoogroups.com] On Behalf Of
> Liquid Saint
> Sent: Montag, 4. Juni 2007 20:37
> To: xl7@yahoogroups.com
> Subject: [xl7] Re: Using the MP7 to control external sound modules
> 
> 
> 
> Thanks Chris,
> I 'm going to be testing that setup today. My final question to you is
> does it lose the ability to send both signals at that point, which
> seems pretty much obvious - but I have to ask any way.
> 
> Kaya
> 
> --- In xl7@yahoogroups. <mailto:xl7%40yahoogroups.com> com, "Chris"
> <cdh79@...> wrote:
>>
>> i didn't see that mail, when i replied to the other one..
>> 
>> make sure to assign the midi-channels to destination "ext" in the
>> pattern edit menu
>> 
>> 
>> -----Original Message-----
>> From: xl7@yahoogroups. <mailto:xl7%40yahoogroups.com> com
> [mailto:xl7@yahoogroups. <mailto:xl7%40yahoogroups.com> com] On Behalf
> Of
>> Liquid Saint
>> Sent: Montag, 4. Juni 2007 14:53
>> To: xl7@yahoogroups. <mailto:xl7%40yahoogroups.com> com
>> Subject: [xl7] Re: Using the MP7 to control external sound modules
>> 
>> 
>> 
>> I'm going to try that. Yesterday was attempting to run a sequence from
>> the Mp7 to a Triton Rack. Sounds internally recorded but the ones that
>> should have been pushing from the Triton - nothing. Like no external
>> data via midi was being sent. I'm going to dig deeper. There has to be
>> a way. Thanks - Alwyn,
>> 
>> Kaya
>> 
>> --- In xl7@yahoogroups. <mailto:xl7%40yahoogroups.com> com, Alwyn
>> <zardac@> wrote:
>> >
>> > i've never personally tried it but i was always under the impression
>> > that it could
>> > 
>> > i think if you set the track's output to be external it will drive
>> > external stuff, or mute the internal channel and have the unit
>> > transmit all midi it will do that..
>> > 
>> > On 04/06/07, Liquid Saint <luminousvelocity@> wrote:
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > Has any one been able to use an Mp7 or Xl7 to control external
>> > > hardware synths or devices from the on-board sequencer?
>> > >
>> > > Kayaone - LV 07
>> > >
>> > >
>> >
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> [Non-text portions of this message have been removed]
>>
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
>