Emu XL-7 & MP-7 User's Group

The sequencer has its own ideas of what the sends should be.  When you change them in the
global menu, they should stick, but as you correctly pointed out, they do not.  Try this: when
you change send amounts in the global menu, save the pattern.  This saves the current setup
with the pattern.

-Aaron

fchieli wrote:

> When working in multimode I set up a Global with different Fx sends per
> channell(Example 70% send to a tap delay on channel 10).
> When playing channel 10 from Logic I can hear the effect working correctly. As soon as
> I hit start on the sequencer though , the effect send goes back to 0%.
> It sounds like the pattern retains Fx information. But I can't find any settings for Fx in
> Pattern Edit Mode.
> What gives?
> Are globals less important hierarchically than patterns?
> Thanks for your help
> Federico
>
> To unsubscribe from this group, send an email to:
> xl7-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/