Emu XL-7 & MP-7 User's Group

Hi Steve,
the XTk is going into the AMT8. It's like this because I want
to be able to control all the other gear while omitting the 
Emu. The composing process is using a computer as well with
sequencing software and here I need the XTk too.
I could do the daisy chain but then I would have serious problems
with the SoundDiver I'm using for programming the synths (tried
and tested - it's very unreliable, it might be SD's fault ...)
Regards:
      Zsolt



> --- Urspr\ufffdngliche Nachricht ---
> Von: "steve_the_composer" <smw-mail@...>
> An: xl7@yahoogroups.com
> Betreff: [xl7] Re: (not) a nasty bug + CC33-63 issue
> Datum: Tue, 27 Dec 2005 18:14:47 -0000
> 
> Is the keyboard going into the E-Mu directly, or is it going into the 
> AMT8?  If its going to the AMT8 first, is there any reason why you 
> can't do a midi daisy chain as follows:
> 
> Keyboard [midi out] --> E-Mu [midi in]
> E-Mu [midi out] --> AMT8 ---> other synth gear?
> 
> --Steve
> 
> --- In xl7@yahoogroups.com, "Zsolt Szabo" <Zsolt.Szabo@g...> wrote:
> 
> > Currently the Emu is the master sending note, cc and clock data to
> > other stuff. The Emu is wired to one of the ports of AMT8, other
> > stuff is connected to other AMT8 ports, using up all the available
> > ports. Waldorf XTk is the masterkeyboard, although Emu is used too.
> > Emu is set to send CC and note data on the MIDI out, but I tried
> > with those disabled, too.
> 
> > So I want to be able to send data from XTk through Emu (because I
> > want to record it as well) to other synths. On the Emu I select the
> > respective track to route XTk's data, using rechannelize input
> > always and tracks set up so they play external only with proper
> > MIDI channel assignment.
> > 
> 
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 

-- 
Lust, ein paar Euro nebenbei zu verdienen? Ohne Kosten, ohne Risiko!
Satte Provisionen f\ufffdr GMX Partner: http://www.gmx.net/de/go/partner