Emu XL-7 & MP-7 User's Group

I have some issues with my main volume knob not being linear. At 
about 2/3 it jumps really high. Probabaly a bad pot. Someone told me 
to reintialixe and re-calibrate the knobs. I did this but, it 
appears that the volume knob is not part of the knob calibration. 
Only the filters/amps/mods/etc were affected. 

Anyway, I did the reclibrate and reintilaize and now need to reload 
all my presets, songs etc. Only problem is that I bought the unit 
used and it did not come with E-loader. I did not see E-loader in 
the file area, only the manual for it is in there. Does anyone know 
if this is freeware for owners. If it on Emu's site, thats great 
however, I can't seem to access there files in support very well. I 
was trying this for another older synth of mine recently and had to 
call them to e-mail me the file because their web site just locks up 
on my machine. Any help in procuring e-loader would be greatly 
appreciated.

Regards,
Vic

--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@p...> 
wrote:
> Footnote: Sometimes restoring the factory multisetup solves minor 
> problems.
> 
> --- In xl7@yahoogroups.com, erik_magrini@B... wrote:
> > Yes, check the FAQ for details.  Basically you'll need to do a
> > System Restore, and then use E-Loader to reload all of the 
Factory
> > Patterns back into your machine.  If you also want to have the 
User
> > Preset Banks mimic the Factory Banks like they do when you first
> > buy a new XX-7, you can use the Save menu to copy an entire bank
> > from the factory to user locations, that's the quickest way....
> > 
> > rEalm
> > 
> > 
> > Hi,
> > Is there a way to restore my xl-7 to the way it was when it was 
> new? 
> >