Emu XL-7 & MP-7 User's Group

Right i've got it working, but i'm not sure whether this matches the 
explanation i've been given!!

triggers 1-3 set to ch1-3 and seq.
ch1-3 set to three different arps
channel assign for track 1 set to multi A, int
(in the midi menu) rechannelize input set to off

now it works on play and record, track one has three different 
channels of different arps. (or should i say three note events on dif 
channels playing arps, assuming all i've done is pressed each trigger 
once!)

if rechannelize input is set to always, then all that gets played and 
recorded are three note events on the basic channel - that is, 
whichever is in the display.  

(i've checked this in the event list)

slightly concerned that my command station is working back-to-front 
regarding the "rechannelize input" function



--- In xl7@yahoogroups.com, Aaron Eppolito <synthesis77@y...> wrote:
> Again, you can only record one track at a time.  If you want to 
record
> three different channels of arps, you must record into a MultiA (or 
B)
> track.  Second to last screen in the pattern/song edit menus.
> 
> With rechannelize on, you're getting all three triggers 
rechannelized
> to the current track.  With it off, you'll only hear the
> rechannelization on playback.  Leaving rechannelize all the time is
> recommended since you'll always hear the same thing as when you play
> back.  If it's wrong with rechannelize on, it'll be wrong at 
playback.
> 
> -Aaron
>