Emu XL-7 & MP-7 User's Group

Just reviewing bits of the manual and appear to be stuck on pages 26-
8!

XL7, v2.0, using PX7 manual.

Setup the multichannel arps, tried to record the trigger buttons 
to "automate your multichannel arpeggiator performance".

followed the instructions, but it's not working.

Have set triggers to seq, tracks 1-3 are set to channels 1-3 and 
different arp presets.  with rechannelize on though, the triggers 
only use the track in the display.  with it off, things work until i 
try to record, at which point it sounds fine but either nothing gets 
recorded or only one of the tracks intermittantly (as if triggering 
the other tracks is cutting it off)

is there a known problem with this?

I've read in the tips and tricks:
To record into the internal sequencer, set the TRIGGERS destination to
be "seq" instead of "int" or "ext" This way, the triggers will be
routed to the sequencer, which will then decide where to route it 
based on the track settings (provided you have rechannelize on).

but it does no good.