Re: [vintagesynthrepair] Prophet 600 (probably digital problem)
2006-10-20 by Russell Rose
hey, turning on a 120 volt unit with the voltage selector set at 220 volt is not as bad as one would think( reversing the scenario mucho serious tends to vent
Messages
Browse messages
Page 105 of 155 · 7723 messages matched
Re: korg 770 breath controller
2006-10-20 by Max Zape
You are correct, sir, my bad. I thought 770 was a type-o for 707 as you suspected. As for the mysterious mouth controller, I believe it could be related to the
Re: korg 770 breath controller
2006-10-20 by korgfetischist
Sorry, I m really talking about the 770 from 1976! There s a picture in the manual, saying you may connect your mouth controller to the remote -jack. I ve
Re: [vintagesynthrepair] Re: Arp Avatar -- no sound.
2006-10-20 by Mike B
thanks. I just noticed it only makes output throught the External Audio Input on the back of the unit. The output seems to include the routed signal except
Prophet 600 (probably digital problem)
2006-10-20 by Brendan Haley
So, I have a Prophet 600 here that arrived broken after shipping (we have talked to the person who shipped it and he says it worked before shipping, and he
Re: Arp Avatar -- no sound.
2006-10-20 by John Koumoutseas
Check the Power supply first...same as the Odyssey +-15v.
Arp Avatar -- no sound.
2006-10-20 by moremodernmusic
I have an Arp Avatar which has no sonic output whatsoever. it just powers on. I tried connecting to the CV out from an Odessey with no results but a faint
Re: [vintagesynthrepair] Re: My new Odyssey Doesn't Work
2006-10-20 by Matthew Harrigan
I tried plugging phones straight into the arp but without success. I think there must be a fault with the VCF, so I ve send it off to a tech. Hopefully it
Re: korg 770 breath controller
2006-10-19 by synthparts
The 770 came out in the mid-70s so no connection to Yamaha. I have one and never heard about a breath controller. I think the original posted may have it
Re: My new Odyssey Doesn't Work
2006-10-19 by John Koumoutseas
It mat be that the ground or even the hot conncetion has broken off at the VCF outpout or one of the main outputs. The power supply should be +15v on the red
RE: [vintagesynthrepair] Taking apart Wurlitzer 4500 organ for moving
2006-10-16 by erlb@comcast.net
Thank you, Tim! Eve _____ From: vintagesynthrepair@yahoogroups.com [mailto:vintagesynthrepair@yahoogroups.com] On Behalf Of timothy kosiorek Sent: Monday,
RE: [vintagesynthrepair] Taking apart Wurlitzer 4500 organ for moving
2006-10-16 by timothy kosiorek
Hello:I move organs all the time,if it doesn t fit through the door the normal way, you should try to take the legs off of it and turn it over on its side,if
Taking apart Wurlitzer 4500 organ for moving
2006-10-16 by ebodeux
Hello, wondering if anyone has any advice on how to take apart a Wurlitzer 4500 organ so it can be moved. It won t fit through the door but needs to be moved
Re: My new Odyssey Doesn't Work
2006-10-14 by mcharrigan
My set is very simple, just the ARP and a mixer with headphones, both connected to the same power socket, both earthed. Silly question, but would an earth loop
Re: [vintagesynthrepair] Re: My new Odyssey Doesn't Work
2006-10-14 by John Brewer
I don t think so but you need to get rid of the hum before you can really hear what else is happening. Temporarily disconnect the earth from the mains plug
Re: Roland System 100 service/power supply
2006-10-13 by ferrograph632
... go ahead and wire it up. will I likely need to replace the transformer altogether or just wire it differently?
Re: [vintagesynthrepair] Service Manuals/Schematics: Will Buy/Trade
2006-10-13 by David Monckton
Hi I ve got a manual for the DsTec Original Syn rack synth & Yamaha TX81z. Cheers ... Send instant messages to your online friends
Re: Roland System 100 service/power supply
2006-10-13 by easterleggs
thanks. I thought about a converter, but I think I d prefer to just go ahead and wire it up. will I likely need to replace the transformer altogether or just
Re: Roland System 100 service/power supply
2006-10-13 by maschinengeist001
Hi! I ve got a few schematics of the System 100... but not of the mixer. If you want me to, I ll do the calculations for your transformer. But if you want a
Roland System 100 service/power supply
2006-10-12 by easterleggs
Hi, group. I ve finally completed my System 100 by acquiring the mixer and speakers from Australia. Can anyone give me some guidance on replacing the power
Re: My new Odyssey Doesn't Work
2006-10-12 by mcharrigan
Hi John, The ARP s input supply is is 100-130v, 20W, 50-60Hz. The coverter s output is 100-120v with maxium load of 100w. Thanks, Matt (Nottingham UK)
Re: [vintagesynthrepair] Re: My new Odyssey Doesn't Work
2006-10-12 by John Brewer
Hi Matt. That should be fine. Is it a standard step up transformer or an inverter you are using. The hum sounds like an earth loop. Can you e-mail a
Re: [vintagesynthrepair] My new Odyssey Doesn't Work
2006-10-11 by John Brewer
Hi, Can you give a few more details. What should the input supply be into the Odyssey? What converter are you using? JohnB (Somerset UK) ... From: mcharrigan
My new Odyssey Doesn't Work
2006-10-11 by mcharrigan
Sorry if this post is a bit vague... I ve just got an ARP Odyssey from the US brought over to uk and purchased a power coverter. When powered up and plugged it
Re: korg 770 breath controller
2006-10-11 by Max Zape
... Yamaha, and ... with no ... Though the two lines are separate entities, they both shared the same R&D department for a time, hence, Korg created some
Re: [vintagesynthrepair] Re: korg 770 breath controller
2006-10-10 by Roy J. Tellason
... Oh? Back in the 80s we were a service center for both Korg _and_ Yamaha, and they were two completely independent operations as far as I know, with no
Re: korg 770 breath controller
2006-10-10 by Max Zape
Back in the 80 s, Korg was acquired by Yamaha. So, to answer your question: any Yamaha breath controller will work. max
Service Manuals/Schematics: Will Buy/Trade
2006-10-10 by maschinengeist001
Hi Group! I want to complete my Service Manual Library. I m willing to buy (paper or PDF) and trade. Here a quick list of what I currently own: Yamaha CS-5
korg 770 breath controller
2006-10-09 by korgfetischist
Hi everybody, is there anybody out there... who has ever heard of that mysterious breath contoller that was meant to be used with the Korg 770 synthesizer? Any
Re: [vintagesynthrepair] Re: Arp 2600
2006-10-08 by Paulo Palmieri
You´re a lucky man, Stephen! Congratulations! I would like to have this luck here in Brazil... Best regards, Paulo ... From: easterleggs To:
Re: Arp 2600
2006-10-07 by easterleggs
Phil Cirocco restored a 2600 for me and did a perfect job. And he s a nice guy to boot. Mine was a 2600 that was found in a trash pile!
Arp 2600
2006-10-07 by gaut2000
I have an ARP 2600 that needs work, I purchased back in the early 70 s . I am not sure who can work on these and do a good job. I am located in south
Re: Inky Insulation
2006-10-07 by Bill Fox
... It certainly is! Howdy, mate. It took me a little time to realize that I never told Spam Arrest to allow this list s messages through. And here I thought
Re: Korg Polysix peculiar memory problem
2006-10-04 by John Koumoutseas
When the battery leakes, it corroded the circuit lands under and around the battery. I susbect it is part of the memory problm you are having now as i have
Syntronics Music Service
2006-10-04 by John Koumoutseas
Hi all, Please check out my web site it may do us both some good. www.syntronics.us Thanks, John
Re: Oberheim Matrix 6 Sercice Manual
2006-10-04 by arp2600fan
Try here: http://www.markglinsky.com/ManualManor.html
Oberheim Matrix 6 Sercice Manual
2006-10-02 by maschinengeist001
Hi! I m in search for the complete Oberheim Service Manual. I know there are some schematics on the Net but they are barely readable. I m willing to pay for a
Moog Satellite schematics.
2006-10-02 by revemosquito
Hey there! I got the schematics from the patent, but haven t verified their accuracy. Is that where you got them from as well, or did you get the actual
Re: Moog Satellite service manual / schematics.
2006-09-29 by maschinengeist001
I ve got ahold of the schematics. Drop me a mail.
Moog Satellite service manual / schematics.
2006-09-29 by revemosquito
Hello, friends. I recently acquired a Moog Satellite (please don t make fun of me). Most of the work it needed was simply cosmetic, but I would love to extend
Service manuals: trade?
2006-09-29 by maschinengeist001
... I ve got bot of them. I should scan & PDF them. Do you have any service manuals? We could trade. Here what I got: Yamaha CS-5 Yamaha CS-10 Yamaha CS-30
Arp omni ii amp issue
2006-09-25 by Mu
So I ve got an omni ii in for repairs, and the client was nice enough to leave out that he had done an attempt himself on fixing it, using a blow torch and
Re: General Music Real Piano Expander LCD display replacement
2006-09-23 by narfman96
Hi Brian, Thanks for the reply. No it s not the backlight. This is the infamous 2 pixel display. 2 dark spots is all that show up on this one. And then only
RE: [vintagesynthrepair] General Music Real Piano Expander LCD display replacement
2006-09-23 by Brian Fuller
If it s just the backlight I believe that it alone can be replaced. There s been numerous people talk about a place that has them available I just can t
General Music Real Piano Expander LCD display replacement
2006-09-23 by narfman96
Hi, Does anyone know the pinout for the GEM Real Piano Expander s display. It has a 14 pin connector and it looks like the backlite is included in the
Re: Inky Insulation
2006-09-21 by ferrograph632
... 2. What should I use to replace it? Are there any diagrams showing the insulator s proprer placement?
PA80
2006-09-20 by wurdo2002
Anyone here get into something as recent as a Korg PA80, or have a link? Thanks in advance.
Re: [vintagesynthrepair] Combo Organ Tech in New England?
2006-09-20 by Brendan Haley
Hi! We re in Boston basically....so it is a bit far. But it is good to know your out there for emergencies! -brendan ... From: Keith Niver To:
Inky Insulation
2006-09-20 by Bill Fox
Greetings, My Taurus II pedals power became too intermittant. The connector seemed to be the problem so I openener up the synth part to find that one
RE: [vintagesynthrepair] Combo Organ Tech in New England?
2006-09-20 by Keith Niver
If you are in Western Mass, I may be able to help you. I go East to Springfield area. Located in Hudson, NY. Keith A. Niver Certified MITA tech Niver s Service