Vintage Synth Repair

I don't think so but you need to get rid of the hum before you can really
hear what else is happening.  Temporarily disconnect the earth from the
mains plug feeding the ARP then, if that does not improve the hum, reconnect
it and remove the earth wire from the plug feeding the mixer.  Note any
changes in the volume of the hum.  Have you tried the phones straight into
the ARP.
JohnB
----- Original Message -----
From: "mcharrigan" <mcharrigan@...>
To: <vintagesynthrepair@yahoogroups.com>
Sent: Sunday, October 15, 2006 1:48 AM
Subject: [vintagesynthrepair] Re: My new Odyssey Doesn't Work


> My set is very simple, just the ARP and a mixer with headphones, both
connected to the
> same power socket, both earthed. Silly question, but would an earth loop
stop the VCF
> from working?
>
> --- In vintagesynthrepair@yahoogroups.com, "John Brewer" <john@...> wrote:
> >